Biblio
The improvement of the implementation of the RSA cryptographic algorithm for encrypting / decoding information flows based on the use of the vector-modular method of modular exponential is presented in this paper. This makes it possible to replace the complex operation of modular multiplication with the addition operation, which increases the speed of the RSA cryptosystem. The scheme of algorithms of modular multiplication and modular exponentiation is presented. The analytical and graphical comparison of the time complexities of the proposed and known approaches shows that the use of the vector-modular method reduces the temporal complexity of the modular exponential compared to the classical one.
The return-oriented programming(ROP) attack has been a common access to exploit software vulnerabilities in the modern operating system(OS). An attacker can execute arbitrary code with the aid of ROP despite security mechanisms are involved in OS. In order to mitigate ROP attack, defense mechanisms are also drawn researchers' attention. Besides, research on the benign use of ROP become a hot spot in recent years, since ROP has a perfect resistance to static analysis, which can be adapted to hide some important code. The results in benign use also benefit from a low overhead on program size. The paper discusses the concepts of ROP attack as well as extended ROP attack in recent years. Corresponding defense mechanisms based on randomization, frequency, and control flow integrity are analyzed as well, besides, we also analyzed limitations in this defense mechanisms. Later, we discussed the benign use of ROP in steganography, code integrity verification, and software watermarking, which showed the significant promotion by adopting ROP. At the end of this paper, we looked into the development of ROP attack, the future of possible mitigation strategies and the potential for benign use.
Ransomware, as a specialized form of malicious software, has recently emerged as a major threat in computer security. With an ability to lock out user access to their content, recent ransomware attacks have caused severe impact at an individual and organizational level. While research in malware detection can be adapted directly for ransomware, specific structural properties of ransomware can further improve the quality of detection. In this paper, we adapt the deep learning methods used in malware detection for detecting ransomware from emulation sequences. We present specialized recurrent neural networks for capturing local event patterns in ransomware sequences using the concept of attention mechanisms. We demonstrate the performance of enhanced LSTM models on a sequence dataset derived by the emulation of ransomware executables targeting the Windows environment.
Searchable encryption (SE) supports privacy-preserving searches over encrypted data. Recent studies on SE have focused on improving efficiency of the schemes. However, it was shown that most of the previous SE schemes could reveal the client's queries even if they are encrypted, thereby leading to privacy violation. In order to solve the problem, several forward private SE schemes have been proposed in a single client environment. However, the previous forward private SE schemes have never been analyzed in multi-client settings. In this paper, we briefly review the previous forward private SE schemes. Then, we conduct a comparative analysis of them in terms of performance and forward privacy. Our analysis demonstrates the previous forward secure SE schemes highly depend on the file-counter. Lastly, we show that they are not scalable in multi-client settings due to the performance and security issue from the file-counter.
The healthcare sector is exploring the incorporation of digital solutions in order to improve access, reduce costs, increase quality and enhance their capacity in reaching a higher number of citizens. However, this opens healthcare organisations' systems to external elements used within or beyond their premises, new risks and vulnerabilities in what regards cyber threats and incidents. We propose the creation of a Security Assessment as a Service (SAaaS) crosslayered system that is able to identify vulnerabilities and proactively assess and mitigate threats in an IT healthcare ecosystem exposed to external devices and interfaces, considering that most users are not experts (even technologically illiterate") in cyber security and, thus, unaware of security tactics or policies whatsoever. The SAaaS can be integrated in an IT healthcare environment allowing the monitoring of existing and new devices, the limitation of connectivity and privileges to new devices, assess a device's cybersecurity risk and - based on the device's behaviour - the assignment and revoking of privileges. The SAaaS brings a controlled cyber aware environment that assures security, confidentiality and trust, even in the presence of non-trusted devices and environments.
Cybersecurity assurance plays an important role in managing trust in smart grid communication systems. In this paper, cybersecurity assurance controls for smart grid communication networks and devices are delineated from the more technical functional controls to provide insights on recent innovative risk-based approaches to cybersecurity assurance in smart grid systems. The cybersecurity assurance control baselining presented in this paper is based on requirements and guidelines of the new family of IEC 62443 standards on network and systems security of industrial automation and control systems. The paper illustrates how key cybersecurity control baselining and tailoring concepts of the U.S. NIST SP 800-53 can be adopted in smart grid security architecture. The paper outlines the application of IEC 62443 standards-based security zoning and assignment of security levels to the zones in smart grid system architectures. To manage trust in the smart grid system architecture, cybersecurity assurance base lining concepts are applied per security impact levels. Selection and justification of security assurance controls presented in the paper is utilizing the approach common in Security Technical Implementation Guides (STIGs) of the U.S. Defense Information Systems Agency. As shown in the paper, enhanced granularity for managing trust both on the overall system and subsystem levels of smart grid systems can be achieved by implementation of the instructions of the CNSSI 1253 of the U.S. Committee of National Security Systems on security categorization and control selection for national security systems.
This paper provides a Common Vulnerability Scoring System (CVSS) metric-based technique for classifying and analysing the prevailing Computer Network Security Vulnerabilities and Threats (CNSVT). The problem that is addressed in this paper, is that, at the time of writing this paper, there existed no effective approaches for analysing and classifying CNSVT for purposes of assessments based on CVSS metrics. The authors of this paper have achieved this by generating a CVSS metric-based dynamic Vulnerability Analysis Classification Countermeasure (VACC) criterion that is able to rank vulnerabilities. The CVSS metric-based VACC has allowed the computation of vulnerability Similarity Measure (VSM) using the Hamming and Euclidean distance metric functions. Nevertheless, the CVSS-metric based on VACC also enabled the random measuring of the VSM for a selected number of vulnerabilities based on the [Ma-Ma], [Ma-Mi], [Mi-Ci], [Ma-Ci] ranking score. This is a technique that is aimed at allowing security experts to be able to conduct proper vulnerability detection and assessments across computer-based networks based on the perceived occurrence by checking the probability that given threats will occur or not. The authors have also proposed high-level countermeasures of the vulnerabilities that have been listed. The authors have evaluated the CVSS-metric based VACC and the results are promising. Based on this technique, it is worth noting that these propositions can help in the development of stronger computer and network security tools.
Security is one of the most important properties of electric power system (EPS). We consider the state estimation (SE) tool as a barrier to the corruption of data on current operating conditions of the EPS. An algorithm for a two-level SE on the basis of SCADA and WAMS measurements is effective in terms of detection of malicious attacks on energy system. The article suggests a methodology to identify cyberattacks on SCADA and WAMS.
Advent of Cyber has converted the entire World into a Global village. But, due to vurneabilites in SCADA architecture [1] national assests are more prone to cyber attacks.. Cyber invasions have a catastrophic effect in the minds of the civilian population, in terms of states security system. A robust cyber security is need of the hour to protect the critical information infastructrue & critical infrastructure of a country. Here, in this paper we scrutinize cyber terrorism, vurneabilites in SCADA network systems [1], [2] and concept of cyber resilience to combat cyber attacks.
The success and widespread adoption of the Internet of Things (IoT) has increased many folds over the last few years. Industries, technologists and home users recognise the importance of IoT in their lives. Essentially, IoT has brought vast industrial revolution and has helped automate many processes within organisations and homes. However, the rapid growth of IoT is also a cause for significant concern. IoT is not only plagued with security, authentication and access control issues, it also doesn't work as well as it should with fourth industrial revolution, commonly known as Industry 4.0. The absence of effective regulation, standards and weak governance has led to a continual downward trend in the security of IoT networks and devices, as well as given rise to a broad range of privacy issues. This paper examines the IoT industry and discusses the urgent need for standardisation, the benefits of governance as well as the issues affecting the IoT sector due to the absence of regulation. Additionally, through this paper, we are introducing an IoT security framework (IoTSFW) for organisations to bridge the current lack of guidelines in the IoT industry. Implementation of the guidelines, defined in the proposed framework, will assist organisations in achieving security, privacy, sustainability and scalability within their IoT networks.
Recently researchers have proposed using deep learning-based systems for malware detection. Unfortunately, all deep learning classification systems are vulnerable to adversarial learning-based attacks, or adversarial attacks, where miscreants can avoid detection by the classification algorithm with very few perturbations of the input data. Previous work has studied adversarial attacks against static analysis-based malware classifiers which only classify the content of the unknown file without execution. However, since the majority of malware is either packed or encrypted, malware classification based on static analysis often fails to detect these types of files. To overcome this limitation, anti-malware companies typically perform dynamic analysis by emulating each file in the anti-malware engine or performing in-depth scanning in a virtual machine. These strategies allow the analysis of the malware after unpacking or decryption. In this work, we study different strategies of crafting adversarial samples for dynamic analysis. These strategies operate on sparse, binary inputs in contrast to continuous inputs such as pixels in images. We then study the effects of two, previously proposed defensive mechanisms against crafted adversarial samples including the distillation and ensemble defenses. We also propose and evaluate the weight decay defense. Experiments show that with these three defenses, the number of successfully crafted adversarial samples is reduced compared to an unprotected baseline system. In particular, the ensemble defense is the most resilient to adversarial attacks. Importantly, none of the defenses significantly reduce the classification accuracy for detecting malware. Finally, we show that while adding additional hidden layers to neural models does not significantly improve the malware classification accuracy, it does significantly increase the classifier's robustness to adversarial attacks.
This computer era leads human to interact with computers and networks but there is no such solution to get rid of security problems. Securities threats misleads internet, we are sometimes losing our hope and reliability with many server based access. Even though many more crypto algorithms are coming for integrity and authentic data in computer access still there is a non reliable threat penetrates inconsistent vulnerabilities in networks. These vulnerable sites are taking control over the user's computer and doing harmful actions without user's privileges. Though Firewalls and protocols may support our browsers via setting certain rules, still our system couldn't support for data reliability and confidentiality. Since these problems are based on network access, lets we consider TCP/IP parameters as a dataset for analysis. By doing preprocess of TCP/IP packets we can build sovereign model on data set and clump cluster. Further the data set gets classified into regular traffic pattern and anonymous pattern using KNN classification algorithm. Based on obtained pattern for normal and threats data sets, security devices and system will set rules and guidelines to learn by it to take needed stroke. This paper analysis the computer to learn security actions from the given data sets which already exist in the previous happens.
The safety of industrial control systems (ICS) depends not only on comprehensive solutions for protecting information, but also on the timing and closure of vulnerabilities in the software of the ICS. The investigation of security incidents in the ICS is often greatly complicated by the fact that malicious software functions only within the computer's volatile memory. Obtaining the contents of the volatile memory of an attacked computer is difficult to perform with a guaranteed reliability, since the data collection procedure must be based on a reliable code (the operating system or applications running in its environment). The paper proposes a new instrumental method for obtaining the contents of volatile memory, general rules for implementing the means of collecting information stored in memory. Unlike software methods, the proposed method has two advantages: firstly, there is no problem in terms of reading the parts of memory, blocked by the operating system, and secondly, the resulting contents are not compromised by such malicious software. The proposed method is relevant for investigating security incidents of ICS and can be used in continuous monitoring systems for the security of ICS.
Traditional security practices focus on negative incentives that attempt to force compliance through constraints, monitoring, and punishment. This paper describes a missing dimension of most organizations' insider threat defense-one that explicitly considers positive incentives for attracting individuals to act in the interests of the organization. Positive incentives focus on properties of the organizational context of workforce management practices - including those relating to organizational supportiveness, coworker connectedness, and job engagement. Without due attention to the organizational context in which insider threats occur, insider misbehaviors may simply reoccur as a natural response to counterproductive or dysfunctional management practices. A balanced combination of positive and negative incentives can improve employees' relationships with the organization and provide a means for employees to better cope with personal and professional stressors. An insider threat program that balances organizational incentives can become an advocate for the workforce and a means for improving employee work life - a welcome message to employees who feel threatened by programs focused on discovering insider wrongdoing.
This paper demonstrates how the Insider Threat Cybersecurity Framework (ITCF) web tool and methodology help provide a more dynamic, defense-in-depth security posture against insider cyber and cyber-physical threats. ITCF includes over 30 cybersecurity best practices to help organizations identify, protect, detect, respond and recover to sophisticated insider threats and vulnerabilities. The paper tests the efficacy of this approach and helps validate and verify ITCF's capabilities and features through various insider attacks use-cases. Two case-studies were explored to determine how organizations can leverage ITCF to increase their overall security posture against insider attacks. The paper also highlights how ITCF facilitates implementation of the goals outlined in two Presidential Executive Orders to improve the security of classified information and help owners and operators secure critical infrastructure. In realization of these goals, ITCF: provides an easy to use rapid assessment tool to perform an insider threat self-assessment; determines the current insider threat cybersecurity posture; defines investment-based goals to achieve a target state; connects the cybersecurity posture with business processes, functions, and continuity; and finally, helps develop plans to answer critical organizational cybersecurity questions. In this paper, the webtool and its core capabilities are tested by performing an extensive comparative assessment over two different high-profile insider threat incidents.
Combining conventional power networks and information communication technologies forms smart grid concept. Researches on the evolution of conventional power grid system into smart grid continue thanks to the development of communication and information technologies hopefully. Testing of smart grid systems is usually performed in simulation environments. However, achieving more effective real-world implementations, a smart grid application needs a real-world test environment, called testbed. Smart grid, which is the combination of conventional electricity line with information communication technologies, is vulnerable to cyber-attacks and this is a key challenge improving the smart grid. The vulnerabilities to cyber-attacks in smart grid arise from information communication technologies' nature inherently. Testbeds, which cyber-security researches and studies can be performed, are needed to find effective solutions against cyber-attacks capabilities in smart grid practices. In this paper, an evaluation of existing smart grid testbeds with the capability of cyber security is presented. First, background, domains, research areas and security issues in smart grid are introduced briefly. Then smart grid testbeds and features are explained. Also, existing security-oriented testbeds and cyber-attack testing capabilities of testbeds are evaluated. Finally, we conclude the study and give some recommendations for security-oriented testbed implementations.
Cybersecurity plays a critical role in protecting sensitive information and the structural integrity of networked systems. As networked systems continue to expand in numbers as well as in complexity, so does the threat of malicious activity and the necessity for advanced cybersecurity solutions. Furthermore, both the quantity and quality of available data on malicious content as well as the fact that malicious activity continuously evolves makes automated protection systems for this type of environment particularly challenging. Not only is the data quality a concern, but the volume of the data can be quite small for some of the classes. This creates a class imbalance in the data used to train a classifier; however, many classifiers are not well equipped to deal with class imbalance. One such example is detecting malicious HMTL files from static features. Unfortunately, collecting malicious HMTL files is extremely difficult and can be quite noisy from HTML files being mislabeled. This paper evaluates a specific application that is afflicted by these modern cybersecurity challenges: detection of malicious HTML files. Previous work presented a general framework for malicious HTML file classification that we modify in this work to use a $\chi$2 feature selection technique and synthetic minority oversampling technique (SMOTE). We experiment with different classifiers (i.e., AdaBoost, Gentle-Boost, RobustBoost, RusBoost, and Random Forest) and a pure detection model (i.e., Isolation Forest). We benchmark the different classifiers using SMOTE on a real dataset that contains a limited number of malicious files (40) with respect to the normal files (7,263). It was found that the modified framework performed better than the previous framework's results. However, additional evidence was found to imply that algorithms which train on both the normal and malicious samples are likely overtraining to the malicious distribution. We demonstrate the likely overtraining by determining that a subset of the malicious files, while suspicious, did not come from a malicious source.