Biblio

Security of sensible data for ultraconstrained IoT smart devices is one of the most challenging task in modern design. The needs of CPA-resistant cryptographic devices has to deal with the demanding requirements of small area and small impact on the overall power consumption. In this work, a novel current-mode feedback suppressor as on-chip analog-level CPA countermeasure is proposed. It aims to suppress differences in power consumption due to data-dependency of CMOS cryptographic devices, in order to counteract CPA attacks. The novel countermeasure is able to improve MTD of unprotected CMOS implementation of at least three orders of magnitude, providing a ×1.1 area and ×1.7 power overhead.

The transition effect ring oscillator (TERO) based true random number generator (TRNG) was proposed by Varchola and Drutarovsky in 2010. There were several stochastic models for this advanced TRNG based on ring oscillator. This paper proposed an improved TERO based TRNG and implements both on Altera Cyclone series FPGA platform and on a 0.13um CMOS ASIC process. FPGA experimental results show that this balanced TERO TRNG is in good performance as the experimental data results past the national institute of standards and technology (NIST) test in 1M bit/s. The TRNG is feasible for a security SoC.

Cooperation of software and hardware with hybrid architectures, such as Xilinx Zynq SoC combining ARM CPU and FPGA fabric, is a high-performance and low-power platform for accelerating RSA Algorithm. This paper adopts the none-subtraction Montgomery algorithm and the Chinese Remainder Theorem (CRT) to implement high-speed RSA processors, and deploys a 48-node cluster infrastructure based on Zynq SoC to achieve extremely high scalability and throughput of RSA computing. In this design, we use the ARM to implement node-to-node communication with the Message Passing Interface (MPI) while use the FPGA to handle complex calculation. Finally, the experimental results show that the overall performance is linear with the number of nodes. And the cluster achieves 6× 9× speedup against a multi-core desktop (Intel i7-3770) and comparable performance to a many-core server (288-core). In addition, we gain up to 2.5× energy efficiency compared to these two traditional platforms.

Near-sensor data analytics is a promising direction for internet-of-things endpoints, as it minimizes energy spent on communication and reduces network load - but it also poses security concerns, as valuable data are stored or sent over the network at various stages of the analytics pipeline. Using encryption to protect sensitive data at the boundary of the on-chip analytics engine is a way to address data security issues. To cope with the combined workload of analytics and encryption in a tight power envelope, we propose Fulmine, a system-on-chip (SoC) based on a tightly-coupled multi-core cluster augmented with specialized blocks for compute-intensive data processing and encryption functions, supporting software programmability for regular computing tasks. The Fulmine SoC, fabricated in 65-nm technology, consumes less than 20mW on average at 0.8V achieving an efficiency of up to 70pJ/B in encryption, 50pJ/px in convolution, or up to 25MIPS/mW in software. As a strong argument for real-life flexible application of our platform, we show experimental results for three secure analytics use cases: secure autonomous aerial surveillance with a state-of-the-art deep convolutional neural network (CNN) consuming 3.16pJ per equivalent reduced instruction set computer operation, local CNN-based face detection with secured remote recognition in 5.74pJ/op, and seizure detection with encrypted data collection from electroencephalogram within 12.7pJ/op.

The emergence of general-purpose system-on-chip (SoC) architectures has given rise to a number of significant security challenges. The current trend in SoC design is system-level integration of heterogeneous technologies consisting of a large number of processing elements such as programmable RISC cores, memory, DSPs, and accelerator function units/ASIC. These processing elements may come from different providers, and application executable code may have varying levels of trust. Some of the pressing architecture design questions are: (1) how to implement multi-level user-defined security; (2) how to optimally and securely share resources and data among processing elements. In this work, we develop a secure multicore architecture, named Hermes. It represents a new architectural framework that integrates multiple processing elements (called tenants) of secure and non-secure cores into the same chip design while (a) maintaining individual tenant security, (b) preventing data leakage and corruption, and (c) promoting collaboration among the tenants. The Hermes architecture is based on a programmable secure router interface and a trust-aware routing algorithm. With 17% hardware overhead, it enables the implementation of processing-element-oblivious secure multicore systems with a programmable distributed group key management scheme.

The accessibility of on-chip embedded infrastructure for test, reconfiguration, or debug poses a serious security problem. Access mechanisms based on IEEE Std 1149.1 (JTAG), and especially reconfigurable scan networks (RSNs), as allowed by IEEE Std 1500, IEEE Std 1149.1-2013, and IEEE Std 1687 (IJTAG), require special care in the design and development. This work studies the threats to trustworthy data transmission in RSNs posed by untrusted components within the RSN and external interfaces. We propose a novel scan pattern generation method that finds trustworthy access sequences to prevent sniffing and spoofing of transmitted data in the RSN. For insecure RSNs, for which such accesses do not exist, we present an automated transformation that improves the security and trustworthiness while preserving the accessibility to attached instruments. The area overhead is reduced based on results from trustworthy access pattern generation. As a result, sensitive data is not exposed to untrusted components in the RSN, and compromised data cannot be injected during trustworthy accesses.

SoCs implementing security modules should be both testable and secure. Oversights in a design's test structure could expose internal modules creating security vulnerabilities during test. In this paper, for the first time, we propose a novel automated security vulnerability analysis framework to identify violations of confidentiality, integrity, and availability policies caused by test structures and designer oversights during SoC integration. Results demonstrate existing information leakage vulnerabilities in implementations of various encryption algorithms and secure microprocessors. These can be exploited to obtain secret keys, control finite state machines, or gain unauthorized access to memory read/write functions.

Security protection is a concern for the Internet of Things (IoT) which performs data exchange autonomously over the internet for remote monitoring, automation and other applications. IoT implementations has raised concerns over its security and various research has been conducted to find an effective solution for this. Thus, this work focus on the analysis of an asymmetric encryption scheme, AA-Beta (AAβ) on a platform constrained in terms of processor capability, storage and random access Memory (RAM). For this work, the platform focused is ARM Cortex-M7 microcontroller. The encryption and decryption's performance on the embedded microcontroller is realized and time executed is measured. By enabled the I-Cache (Instruction cache) and D-Cache (Data Cache), the performances are 50% faster compared to disabled the D-Cache and I-Cache. The performance is then compared to our previous work on System on Chip (SoC). This is to analyze the gap of the SoC that has utilized the full GNU Multiple Precision Arithmetic Library (GMP) package versus ARM Cortex-M7 that using the mini-gmp package in term of the footprint and the actual performance.

With the advent of globalization in the semiconductor industry, it is necessary to prevent unauthorized usage of third-party IPs (3PIPs), cloning and unwanted modification of 3PIPs, and unauthorized production of ICs. Due to the increasing complexity of ICs, system-on-chip (SoC) designers use various 3PIPs in their design to reduce time-to-market and development costs, which creates a trust issue between the SoC designer and the IP owners. In addition, as the ICs are fabricated around the globe, the SoC designers give fabrication contracts to offshore foundries to manufacture ICs and have little control over the fabrication process, including the total number of chips fabricated. Similarly, the 3PIP owners lack control over the number of fabricated chips and/or the usage of their IPs in an SoC. Existing research only partially addresses the problems of IP piracy and IC overproduction, and to the best of our knowledge, there is no work that considers IP overuse. In this article, we present a comprehensive solution for preventing IP piracy and IC overproduction by assuring forward trust between all entities involved in the SoC design and fabrication process. We propose a novel design flow to prevent IC overproduction and IP overuse. We use an existing logic encryption technique to obfuscate the netlist of an SoC or a 3PIP and propose a modification to enable manufacturing tests before the activation of chips which is absolutely necessary to prevent overproduction. We have used asymmetric and symmetric key encryption, in a fashion similar to Pretty Good Privacy (PGP), to transfer keys from the SoC designer or 3PIP owners to the chips. In addition, we also propose to attach an IP digest (a cryptographic hash of the entire IP) to the header of an IP to prevent modification of the IP by the SoC designers. We have shown that our approach is resistant to various attacks with the cost of minimal area overhead.

Systems-on-a-Chip are among the best-performing and complete solutions for complex electronic systems. This is also true in the field of network security, an application requiring high performance with low resource usage. This work presents an Advanced Encryption Standard implementation for Systems-on-a-Chip using as a reference the Cipher Block Chaining mode. In particular, a flexible interface based and the Advanced Peripheral Bus to integrate the encryption algorithm with any kind of processor is presented. The hardware-software approach of the architecture is also analyzed and described. The final system was integrated on a Xilinx Zynq 7000 to prototype and evaluate the idea. Results show that our solution demonstrates good performance and flexibility with low resource usage, occupying less than 2% of the Zynq 7000 with a throughput of 320 Mbps. The architecture is suitable when implementations of symmetric encryption algorithms for modern Systems-on-a-Chip are required.

Embedded systems are becoming increasingly complex as designers integrate different functionalities into a single application for execution on heterogeneous hardware platforms. In this work we propose a system-level security approach in order to provide isolation of tasks without the need to trust a central authority at run-time. We discuss security requirements that can be found in complex embedded systems that use heterogeneous execution platforms, and by regulating memory access we create mechanisms that allow safe use of shared IP with direct memory access, as well as shared libraries. We also present a prototype Isolation Unit that checks memory transactions and allows for dynamic configuration of permissions.

This paper develops a new lightweight secure sensing technique using hardware isolation. We focus on protecting the sensor from unauthorized accesses, which can be issued by attackers attempting to compromise the security and privacy of the sensed data. We satisfy the security requirements by employing the hardware isolation feature provided by the secure processor of the target sensor system. In particular, we deploy the sensor in a hardware isolated secure environment, which eliminates the potential vulnerability exposed to unauthorized attackers. We implement the hardware isolation-based secure sensing approach on an Xilinx Zynq-7000 SoC leveraging ARM TrustZone. Our experiments and security analysis on the real hardware prove the effectiveness and low overhead of the proposed approach.

In the near future, billions of new smart devices will connect the big network of the Internet of Things, playing an important key role in our daily life. Allowing IPv6 on the low-power resource constrained devices will lead research to focus on novel approaches that aim to improve the efficiency, security and performance of the 6LoWPAN adaptation layer. This work in progress paper proposes a hardware-based Network Packet Filtering (NPF) and an IPv6 Link-local address calculator which is able to filter the received IPv6 packets, offering nearly 18% overhead reduction. The goal is to obtain a System-on-Chip implementation that can be deployed in future IEEE 802.15.4 radio modules.

Intellectual Property (IP) verification is a crucial component of System-on-Chip (SoC) design in the modern IC design business model. Given a globalized supply chain and an increasing demand for IP reuse, IP theft has become a major concern for the IC industry. In this paper, we address the trust issues that arise between IP owners and IP users during the functional verification of an IP core. Our proposed scheme ensures the privacy of IP owners and users, by a) generating a privacy-preserving version of the IP, which is functionally equivalent to the original design, and b) employing homomorphically encrypted input vectors. This allows the functional verification to be securely outsourced to a third-party, or to be executed by either parties, while revealing the least possible information regarding the test vectors and the IP core. Experiments on both combinational and sequential benchmark circuits demonstrate up to three orders of magnitude IP verification slowdown, due to the computationally intensive fully homomorphic operations, for different security parameter sizes.

This paper briefly presents a position that hardware-based roots of trust, integrated in silicon with System-on-Chip (SoC) solutions, represent the most current stage in a progression of technologies aimed at realizing the most foundational computer security concepts. A brief look at this historical progression from a personal perspective is followed by an overview of more recent developments, with particular focus on a root of trust for cryptographic key provisioning and SoC feature management aimed at achieving supply chain assurances and serves as a basis for trust that is linked to properties enforced in hardware. The author assumes no prior knowledge of these concepts and developments by the reader.

The design of low power chip for IoT applications is very challenge, especially for self-powered wireless sensors. Achieving ultra low power requires both system level optimization and circuit level innovation. This paper presents a continuous-in-time and discrete-in-amplitude (CTDA) system architecture that facilitates adaptive data rate sampling and clockless implementation for a wireless sensor SoC.

Cyber security operations centre (CSOC) is an essential business control aimed to protect ICT systems and support an organisation's Cyber Defense Strategy. Its overarching purpose is to ensure that incidents are identified and managed to resolution swiftly, and to maintain safe & secure business operations and services for the organisation. A CSOC framework is proposed comprising Log Collection, Analysis, Incident Response, Reporting, Personnel and Continuous Monitoring. Further, a Cyber Defense Strategy, supported by the CSOC framework, is discussed. Overlaid atop the strategy is the well-known Her Majesty's Government (HMG) Protective Monitoring Controls (PMCs). Finally, the difficulty and benefits of operating a CSOC are explained.

Recent years have seen the rise of sophisticated attacks including advanced persistent threats (APT) which pose severe risks to organizations and governments. Additionally, new malware strains appear at a higher rate than ever before. Since many of these malware evade existing security products, traditional defenses deployed by enterprises today often fail at detecting infections at an early stage. We address the problem of detecting early-stage APT infection by proposing a new framework based on belief propagation inspired from graph theory. We demonstrate that our techniques perform well on two large datasets. We achieve high accuracy on two months of DNS logs released by Los Alamos National Lab (LANL), which include APT infection attacks simulated by LANL domain experts. We also apply our algorithms to 38TB of web proxy logs collected at the border of a large enterprise and identify hundreds of malicious domains overlooked by state-of-the-art security products.

In our digital world internet is a widespread channel for transmission of information. Information that is transmitted can be in form of messages, images, audios and videos. Due to this escalating use of digital data exchange cryptography and network security has now become very important in modern digital communication network. Cryptography is a method of storing and transmitting data in a particular form so that only those for whom it is intended can read and process it. The term cryptography is most often associated with scrambling plaintext into ciphertext. This process is called as encryption. Today in industrial processes images are very frequently used, so it has become essential for us to protect the confidential image data from unauthorized access. In this paper Advanced Encryption Standard (AES) which is a symmetric algorithm is used for encryption and decryption of image. Performance of Advanced Encryption Standard algorithm is further enhanced by adding a key stream generator W7. NIOS II soft core processor is used for implementation of encryption and decryption algorithm. A system is designed with the help of SOPC (System on programmable chip) builder tool which is available in QUARTUS II (Version 10.1) environment using NIOS II soft core processor. Developed single core system is implemented using Altera DE2 FPGA board (Cyclone II EP2C35F672). Using MATLAB the image is read and then by using DWT (Discrete Wavelet Transform) the image is compressed. The image obtained after compression is now given as input to proposed AES encryption algorithm. The output of encryption algorithm is given as input to decryption algorithm in order to get back the original image. The implementation of which is done on the developed single core platform using NIOS II processor. Finally the output is analyzed in MATLAB by plotting histogram of original and encrypted image.

Hash tables form a core component of many algorithms as well as network devices. Because of their large size, they often require a combined memory model, in which some of the elements are stored in a fast memory (for example, cache or on-chip SRAM) while others are stored in much slower memory (namely, the main memory or off-chip DRAM). This makes the implementation of real-life hash tables particularly delicate, as a suboptimal choice of the hashing scheme parameters may result in a higher average query time, and therefore in a lower throughput. In this paper, we focus on multiple-choice hash tables. Given the number of choices, we study the tradeoff between the load of a hash table and its average lookup time. The problem is solved by analyzing an equivalent problem: the expected maximum matching size of a random bipartite graph with a fixed left-side vertex degree. Given two choices, we provide exact results for any finite system, and also deduce asymptotic results as the fast memory size increases. In addition, we further consider other variants of this problem and model the impact of several parameters. Finally, we evaluate the performance of our models on Internet backbone traces, and illustrate the impact of the memories speed difference on the choice of parameters. In particular, we show that the common intuition of entirely avoiding slow memory accesses by using highly efficient schemes (namely, with many fast-memory choices) is not always optimal.
 

Integrated circuits (ICs) are now designed and fabricated in a globalized multivendor environment making them vulnerable to malicious design changes, the insertion of hardware Trojans/malware, and intellectual property (IP) theft. Algorithmic reverse engineering of digital circuits can mitigate these concerns by enabling analysts to detect malicious hardware, verify the integrity of ICs, and detect IP violations. In this paper, we present a set of algorithms for the reverse engineering of digital circuits starting from an unstructured netlist and resulting in a high-level netlist with components such as register files, counters, adders, and subtractors. Our techniques require no manual intervention and experiments show that they determine the functionality of >45% and up to 93% of the gates in each of the test circuits that we examine. We also demonstrate that our algorithms are scalable to real designs by experimenting with a very large, highly-optimized system-on-chip (SOC) design with over 375000 combinational elements. Our inference algorithms cover 68% of the gates in this SOC. We also demonstrate that our algorithms are effective in aiding a human analyst to detect hardware Trojans in an unstructured netlist.