Biblio

Although the vision of 5G is to accommodate billions IoT devices and applications, its success depends very much on its ability to provide enhanced and affordable security. This paper introduces an Identity Federation solution which reuses the SIM authentication for cellular IoT devices enabling single-sign-on. The proposed solution alleviates the IoT provider's burden of device identity management at the same time as the operational costs are reduced considerably. The proposed solution is realized by open source software for LTE, identity management and IoT.

Creating and maintaining an up-to-date set of security rules that match misuses of crypto APIs is challenging, as crypto APIs constantly evolve over time with new cryptographic primitives and settings, making existing ones obsolete. To address this challenge, we present a new approach to extract security fixes from thousands of code changes. Our approach consists of: (i) identifying code changes, which often capture security fixes, (ii) an abstraction that filters irrelevant code changes (such as refactorings), and (iii) a clustering analysis that reveals commonalities between semantic code changes and helps in eliciting security rules. We applied our approach to the Java Crypto API and showed that it is effective: (i) our abstraction effectively filters non-semantic code changes (over 99% of all changes) without removing security fixes, and (ii) over 80% of the code changes are security fixes identifying security rules. Based on our results, we identified 13 rules, including new ones not supported by existing security checkers.

Converged Multi-Level Secure systems allow users to interact with and freely move between applications and data of varying sensitivity on a single user interface. They promise unprecedented usability and security, especially in security-critical environments like Defence. Yet these promises rely on hard assumptions about secure user behaviour. We present initial work to test the validity of these assumptions in the absence of deception by an adversary. We conducted a user study with 21 participants on the Cross Domain Desktop Compositor. Chief amongst our findings is that the vast majority of participants (19 of 21) behave securely, even when doing so requires more effort than to behave insecurely. Our findings suggest that there is large scope for further research on converged Multi-Level Secure systems, and highlight the value of user studies to complement formal security analyses of critical systems.

Contemporary enterprise systems focus primarily on performance and development/maintenance costs. Dealing with cyber-threats and system compromise is relegated to good coding (i.e., defensive programming) and secure environment (e.g., patched OS, firewalls, etc.). This approach, while a necessary start, is not sufficient. Such security relies on no missteps, and compromise only need a single flaw; consequently, we must design for compromise and mitigate its impact. One approach is to utilize fine-grained modularization and isolation. In such a system, decomposition ensures that compromise of a single module presents limited and known risk to data/resource theft and denial. We propose mechanisms for automating such modular composition and consider its system performance impact.

This paper presents an image technique Discrete Wavelet Transform and Singular Value Decomposition for image steganography. We are using a text file and convert into an image as watermark and embed watermarks into the cover image. We evaluate performance and compare this method with other methods like Least Significant Bit, Discrete Cosine Transform, and Discrete Wavelet Transform using Peak Signal Noise Ratio and Mean Squared Error. The result of this experiment showed that combine of Discrete Wavelet Transform and Singular Value Decomposition performance is better than the Least Significant Bit, Discrete Cosine Transform, and Discrete Wavelet Transform. The result of Peak Signal Noise Ratio obtained from Discrete Wavelet Transform and Singular Value Decomposition method is 57.0519 and 56.9520 while the result of Mean Squared Error is 0.1282 and 0.1311. Future work for this research is to add the encryption method on the data to be entered so that if there is an attack then the encryption method can secure the data becomes more secure.

With the rapid development of information technology, video surveillance system has become a key part in the security and protection system of modern cities. Especially in prisons, surveillance cameras could be found almost everywhere. However, with the continuous expansion of the surveillance network, surveillance cameras not only bring convenience, but also produce a massive amount of monitoring data, which poses huge challenges to storage, analytics and retrieval. The smart monitoring system equipped with intelligent video analytics technology can monitor as well as pre-alarm abnormal events or behaviours, which is a hot research direction in the field of surveillance. This paper combines deep learning methods, using the state-of-the-art framework for instance segmentation, called Mask R-CNN, to train the fine-tuning network on our datasets, which can efficiently detect objects in a video image while simultaneously generating a high-quality segmentation mask for each instance. The experiment show that our network is simple to train and easy to generalize to other datasets, and the mask average precision is nearly up to 98.5% on our own datasets.

For modern Automatic Test Equipment (ATE) one of the most daunting tasks is now Information Assurance (IA). What was once at most a secondary item consisting mainly of installing an Anti-Virus suite is now becoming one of the most important aspects of ATE. Given the current climate of IA it has become important to ensure ATE is kept safe from any breaches of security or loss of information. Even though most ATE are not on the Internet (or even on a network for many) they are still vulnerable to some of the same attack vectors plaguing common computers and other electronic devices. This paper will discuss some of the processes and procedures which must be used to ensure that modern ATE can continue to be used to test and detect faults in the systems they are designed to test. The common items that must be considered for ATE are as follows: The ATE system must have some form of Anti-Virus (as should all computers). The ATE system should have a minimum software footprint only providing the software needed to perform the task. The ATE system should be verified to have all the Operating System (OS) settings configured pursuant to the task it is intended to perform. The ATE OS settings should include password and password expiration settings to prevent access by anyone not expected to be on the system. The ATE system software should be written and constructed such that it in itself is not readily open to attack. The ATE system should be designed in a manner such that none of the instruments in the system can easily be attacked. The ATE system should insure any paths to the outside world (such as Ethernet or USB devices) are limited to only those required to perform the task it was designed for. These and many other common configuration concerns will be discussed in the paper.

Dynamic interaction appears in many real-world scenarios where players are able to observe (perhaps imperfectly) the actions of another player and react accordingly. We consider the baseline representation of dynamic games - the extensive form - and focus on computing Stackelberg equilibrium (SE), where the leader commits to a strategy to which the follower plays a best response. For one-shot games (e.g., security games), strategy-generation (SG) algorithms offer dramatic speed-up by incrementally expanding the strategy spaces. However, a direct application of SG to extensive-form games (EFGs) does not bring a similar speed-up since it typically results in a nearly-complete strategy space. Our contributions are twofold: (1) for the first time we introduce an algorithm that allows us to incrementally expand the strategy space to find a SE in EFGs; (2) we introduce a heuristic variant of the algorithm that is theoretically incomplete, but in practice allows us to find exact (or close-to optimal) Stackelberg equilibrium by constructing a significantly smaller strategy space. Our experimental evaluation confirms that we are able to compute SE by considering only a fraction of the strategy space that often leads to a significant speed-up in computation times.

Website defacement is the practice of altering the web pages of a website after its compromise. The altered pages, calleddeface pages, can negatively affect the reputation and business of the victim site. Previous research has focused primarily on detection, rather than exploring the defacement phenomenon in depth. While investigating several defacements, we observed that the artifacts left by the defacers allow an expert analyst to investigate the actors' modus operandi and social structure, and expand from the single deface page to a group of related defacements (i.e., acampaign ). However, manually performing such analysis on millions of incidents is tedious, and poses scalability challenges. From these observations, we propose an automated approach that efficiently builds intelligence information out of raw deface pages. Our approach streamlines the analysts job by automatically recognizing defacement campaigns, and assigning meaningful textual labels to them. Applied to a comprehensive dataset of 13 million defacement records, from Jan. 1998 to Sept. 2016, our approach allowed us to conduct the first large-scale measurement on web defacement campaigns. In addition, our approach is meant to be adopted operationally by analysts to identify live campaigns on the field. We go beyond confirming anecdotal evidence. We analyze the social structure of modern defacers, which includes lone individuals as well as actors that cooperate with each others, or with teams, which evolve over time and dominate the scene. We conclude by drawing a parallel between the time line of World-shaping events and defacement campaigns, representing the evolution of the interests and orientation of modern defacers.

The success and widespread adoption of the Internet of Things (IoT) has increased many folds over the last few years. Industries, technologists and home users recognise the importance of IoT in their lives. Essentially, IoT has brought vast industrial revolution and has helped automate many processes within organisations and homes. However, the rapid growth of IoT is also a cause for significant concern. IoT is not only plagued with security, authentication and access control issues, it also doesn't work as well as it should with fourth industrial revolution, commonly known as Industry 4.0. The absence of effective regulation, standards and weak governance has led to a continual downward trend in the security of IoT networks and devices, as well as given rise to a broad range of privacy issues. This paper examines the IoT industry and discusses the urgent need for standardisation, the benefits of governance as well as the issues affecting the IoT sector due to the absence of regulation. Additionally, through this paper, we are introducing an IoT security framework (IoTSFW) for organisations to bridge the current lack of guidelines in the IoT industry. Implementation of the guidelines, defined in the proposed framework, will assist organisations in achieving security, privacy, sustainability and scalability within their IoT networks.

Using Software-defined Networks in wide area (SDN-WAN) has been strongly emerging in the past years. Due to scalability and economical reasons, SDN-WAN mostly uses an in-band control mechanism, which implies that control and data sharing the same critical physical links. However, the in-band control and centralized control architecture can be exploited by attackers to launch distributed denial of service (DDoS) on SDN control plane by flooding the shared links and/or the Open flow agents. Therefore, constructing a resilient software designed network requires dynamic isolation and distribution of the control flow to minimize damage and significantly increase attack cost. Existing solutions fall short to address this challenge because they require expensive extra dedicated resources or changes in OpenFlow protocol. In this paper, we propose a moving target technique called REsilient COntrol Network architecture (ReCON) that uses the same SDN network resources to defend SDN control plane dynamically against the DDoS attacks. ReCON essentially, (1) minimizes the sharing of critical resources among data and control traffic, and (2) elastically increases the limited capacity of the software control agents on-demand by dynamically using the under-utilized resources from within the same SDN network. To implement a practical solution, we formalize ReCON as a constraints satisfaction problem using Satisfiability Modulo Theory (SMT) to guarantee a correct-by-construction control plan placement that can handle dynamic network conditions.

An abundance of data in many disciplines of science, engineering, national security, health care, and business has led to the emerging field of Big Data Analytics that run in a cloud computing environment. To process massive quantities of data in the cloud, developers leverage Data-Intensive Scalable Computing (DISC) systems such as Google's MapReduce, Hadoop, and Spark. Currently, developers do not have easy means to debug DISC applications. The use of cloud computing makes application development feel more like batch jobs and the nature of debugging is therefore post-mortem. Developers of big data applications write code that implements a data processing pipeline and test it on their local workstation with a small sample data, downloaded from a TB-scale data warehouse. They cross fingers and hope that the program works in the expensive production cloud. When a job fails or they get a suspicious result, data scientists spend hours guessing at the source of the error, digging through post-mortem logs. In such cases, the data scientists may want to pinpoint the root cause of errors by investigating a subset of corresponding input records. The vision of my work is to provide interactive, real-time and automated debugging services for big data processing programs in modern DISC systems with minimum performance impact. My work investigates the following research questions in the context of big data analytics: (1) What are the necessary debugging primitives for interactive big data processing? (2) What scalable fault localization algorithms are needed to help the user to localize and characterize the root causes of errors? (3) How can we improve testing efficiency during iterative development of DISC applications by reasoning the semantics of dataflow operators and user-defined functions used inside dataflow operators in tandem? To answer these questions, we synthesize and innovate ideas from software engineering, big data systems, and program analysis, and coordinate innovations across the software stack from the user-facing API all the way down to the systems infrastructure.

As the worldwide internet has non-stop developments, it comes with enormous amount automatically generated malware. Those malware had become huge threaten to computer users. A comprehensive malware family classifier can help security researchers to quickly identify characteristics of malware which help malware analysts to investigate in more efficient way. However, despite the assistance of the artificial intelligent (AI) classifiers, it has been shown that the AI-based classifiers are vulnerable to so-called adversarial attacks. In this paper, we demonstrate how the adversarial settings can be applied to the classifier of malware families classification. Our experimental results achieved high successful rate through the adversarial attack. We also find the important features which are ignored by malware analysts but useful in the future analysis.

The growing interest in the smart device/home/city has resulted in increasing popularity of Internet of Things (IoT) deployment. However, due to the open and heterogeneous nature of IoT networks, there are various challenges to deploy an IoT network, among which security and scalability are the top two to be addressed. To improve the security and scalability for IoT networks, we propose a Software-Defined Virtual Private Network (SD-VPN) solution, in which each IoT application is allocated with its own overlay VPN. The VPN tunnels used in this paper are VxLAN based tunnels and we propose to use the SDN controller to push the flow table of each VPN to the related OpenvSwitch via the OpenFlow protocol. The SD-VPN solution can improve the security of an IoT network by separating the VPN traffic and utilizing service chaining. Meanwhile, it also improves the scalability by its overlay VPN nature and the VxLAN technology.

With the increase in the popularity of computerized online applications, the analysis, and detection of a growing number of newly discovered stealthy malware poses a significant challenge to the security community. Signature-based and behavior-based detection techniques are becoming inefficient in detecting new unknown malware. Machine learning solutions are employed to counter such intelligent malware and allow performing more comprehensive malware detection. This capability leads to an automatic analysis of malware behavior. The proposed oblique random forest ensemble learning technique is efficient for malware classification. The effectiveness of the proposed method is demonstrated with three malware classification datasets from various sources. The results are compared with other variants of decision tree learning models. The proposed system performs better than the existing system in terms of classification accuracy and false positive rate.

Smartphones have evolved over the years from simple devices to communicate with each other to fully functional portable computers although with comparatively less computational power but inholding multiple applications within. With the smartphone revolution, the value of personal data has increased. As technological complexities increase, so do the vulnerabilities in the system. Smartphones are the latest target for attacks. Android being an open source platform and also the most widely used smartphone OS draws the attention of many malware writers to exploit the vulnerabilities of it. Attackers try to take advantage of these vulnerabilities and fool the user and misuse their data. Malwares have come a long way from simple worms to sophisticated DDOS using Botnets, the latest trends in computer malware tend to go in the distributed direction, to evade the multiple anti-virus apps developed to counter generic viruses and Trojans. However, the recent trend in android system is to have a combination of applications which acts as malware. The applications are benign individually but when grouped, these may result into a malicious activity. This paper proposes a new category of distributed malware in android system, how it can be used to evade the current security, and how it can be detected with the help of graph matching algorithm.

This computer era leads human to interact with computers and networks but there is no such solution to get rid of security problems. Securities threats misleads internet, we are sometimes losing our hope and reliability with many server based access. Even though many more crypto algorithms are coming for integrity and authentic data in computer access still there is a non reliable threat penetrates inconsistent vulnerabilities in networks. These vulnerable sites are taking control over the user's computer and doing harmful actions without user's privileges. Though Firewalls and protocols may support our browsers via setting certain rules, still our system couldn't support for data reliability and confidentiality. Since these problems are based on network access, lets we consider TCP/IP parameters as a dataset for analysis. By doing preprocess of TCP/IP packets we can build sovereign model on data set and clump cluster. Further the data set gets classified into regular traffic pattern and anonymous pattern using KNN classification algorithm. Based on obtained pattern for normal and threats data sets, security devices and system will set rules and guidelines to learn by it to take needed stroke. This paper analysis the computer to learn security actions from the given data sets which already exist in the previous happens.

Vehicular ad-hoc networks (VANETs) are designed to play a key role in the development of future transportation systems. Although cooperative awareness messages provide the required situational awareness for new safety and efficiency applications, they also introduce a new attack vector to compromise privacy. The use of ephemeral credentials called pseudonyms for privacy protection was proposed while ensuring the required security properties. In order to prevent an attacker from linking old to new pseudonyms, mix-zones provide a region in which vehicles can covertly change their signing material. In this poster, we extend the idea of mix-zones to mitigate pseudonym linking attacks with a mechanism inspired by chaff-based privacy defense techniques for mix-networks. By providing chaff trajectories, our system restores the efficacy of mix-zones to compensate for a lack of vehicles available to participate in the mixing procedure. Our simulation results of a realistic traffic scenario show that a significant improvement is possible.

In Mobile Ad-hoc Network (MANET), we cannot predict the clear picture of the topology of a node because of its varying nature. Without notice participation and departure of nodes results in lack of trust relationship between nodes. In such circumstances, there is no guarantee that path between two nodes would be secure or free of malicious nodes. The presence of single malicious node could lead repeatedly compromised node. After providing security to route and data packets still, there is a need for the implementation of defense mechanism that is intrusion detection system(IDS) against compromised nodes. In this paper, we have implemented IDS, which defend against some routing attacks like the black hole and gray hole successfully. After measuring performance we get marginally increased Packet delivery ratio and Throughput.

As security incidents might have disastrous consequences on an enterprise's information technology (IT), organizations need to secure their IT against threats. Threat intelligence (TI) promises to provide actionable information about current threats for information security management systems (ISMS). Common information range from malware characteristics to observed perpetrator origins that allow customizing security controls. The aim of this article is to assess the impact of utilizing public available threat feeds within the corporate process on an organization's security information level. We developed a framework to integrate TI for large corporations and evaluated said framework in cooperation with a global acting manufacturer and retailer. During the development of the TI framework, a specific provider of TI was analyzed and chosen for integration within the process of vulnerability management. The evaluation of this exemplary integration was assessed by members of the information security department at the cooperating enterprise. During our evaluation it was emphasized that a prioritization of management activities based on whether threats that have been observed in the wild are targeting them or similar companies. Furthermore, indicators of compromise (IoC) provided by the chosen TI source, can be automatically integrated utilizing a provided software development kit. Theoretical relevance is based on the contribution towards the verification of proposed benefits of TI integration, such as increasing the resilience of an enterprise network, within a real-world environment. Overall, practitioners suggest that TI integration should result in enhanced management of security budgets and more resilient enterprise networks.

Cloud Computing is an important term of modern technology. The usefulness of Cloud is increasing day by day and simultaneously more and more security problems are arising as well. Two of the major threats of Cloud are improper authentication and multi-tenancy. According to the specialists both pros and cons belong to multi-tenancy. There are security protocols available but it is difficult to claim these protocols are perfect and ensure complete protection. The purpose of this paper is to propose an integrated model to ensure better Cloud security for Authentication and multi-tenancy. Multi-tenancy means sharing of resources and virtualization among clients. Since multi-tenancy allows multiple users to access same resources simultaneously, there is high probability of accessing confidential data without proper privileges. Our model includes Kerberos authentication protocol to enhance authentication security. During our research on Kerberos we have found some flaws in terms of encryption method which have been mentioned in couple of IEEE conference papers. Pondering about this complication we have elected Elliptic Curve Cryptography. On the other hand, to attenuate arose risks due to multi-tenancy we are proposing a Resource Allocation Manager Unit, a Control Database and Resource Allocation Map. This part of the model will perpetuate resource allocation for the users.

In order to solve the problem of vulnerable password guessing attacks caused by dictionary attacks, replay attacks in the authentication process, and man-in-the-middle attacks in the existing wireless local area network in terms of security authentication, we make some improvements to the 802.1X / EAP authentication protocol based on the study of the current IEEE802.11i security protocol with high security. After introducing the idea of Kerberos protocol authentication and applying the idea in the authentication process of 802.1X / EAP, a new protocol of Kerberos extensible authentication protocol (KEAP) is proposed. Firstly, the protocol introduces an asymmetric key encryption method, uses public key encryption during data transmission, and the receiver uses the corresponding private key for decryption. With unidirectional characteristics and high security, the encryption can avoid password guessing attacks caused by dictionary attacks as much as possible. Secondly, aiming at the problem that the request message sent from the client to the authentication server is vulnerable to replay attacks, the protocol uses a combination of the message sequence number and the random number, and the message serial number is added to the request message sent from the client to the authentication server. And establish a list database for storing message serial number and random number in the authentication server. After receiving a transfer message, the serial number and the random number are extracted and compared with the values in the list database to distinguish whether it is a retransmission message. Finally, the protocol introduces a keychain mechanism and uses an irreversible Hash function to encrypt the final authentication result, thereby effectively solving the man-in-the-middle attack by the pretender. The experiment uses the OPNET 14.5 simulation platform to model the KEAP protocol and simulate simulation attacks, and compares it with the current more common EAP-TLS authentication protocol. Experimental results show that the average traffic of the KEAP protocol is at least 14.74% higher than the EAP-TLS authentication protocol, and the average bit error rate is reduced by at least 24.00%.

Nanotechnology provides new solutions for numerous applications that have a significant effect on almost every aspect of our community including health monitoring, smart cities, military, agriculture, and industry. The interconnection of nanoscale devices with existing communication networks over the Internet defines a novel networking paradigm called the Internet of Nano-Things (IoNT). The IoNT involves a large number of nanosensors that used to provide more precise and detailed information about a particular object to enable a better understanding of object behaviour. In this paper, we investigate the challenges and opportunities of the IoNT system in various applications. An overview of the IoNT is first introduced. This is followed by a discussion of the network architecture of the IoNT and various applications that benefit from integrating IoT with nanotechnology. In the end, since security is considered to be one of the main issues of the IoNT system, we provide an in-depth discussion on security goals, attack vectors and security challenges of the IoNT system.

The Internet of Things (IoT) is one of the emerging technologies that has seized the attention of researchers, the reason behind that was the IoT expected to be applied in our daily life in the near future and human will be wholly dependent on this technology for comfort and easy life style. Internet of things is the interconnection of internet enabled things or devices to connect with each other and to humans in order to achieve some goals or the ability of everyday objects to connect to the Internet and to send and receive data. However, the Internet of Things (IoT) raises significant challenges that could stand in the way of realizing its potential benefits. This paper discusses access control area as one of the most crucial aspect of security and privacy in IoT and proposing a new way of access control that would decide who is allowed to access what and who is not to the IoT subjects and sensors.

This paper demonstrates how the Insider Threat Cybersecurity Framework (ITCF) web tool and methodology help provide a more dynamic, defense-in-depth security posture against insider cyber and cyber-physical threats. ITCF includes over 30 cybersecurity best practices to help organizations identify, protect, detect, respond and recover to sophisticated insider threats and vulnerabilities. The paper tests the efficacy of this approach and helps validate and verify ITCF's capabilities and features through various insider attacks use-cases. Two case-studies were explored to determine how organizations can leverage ITCF to increase their overall security posture against insider attacks. The paper also highlights how ITCF facilitates implementation of the goals outlined in two Presidential Executive Orders to improve the security of classified information and help owners and operators secure critical infrastructure. In realization of these goals, ITCF: provides an easy to use rapid assessment tool to perform an insider threat self-assessment; determines the current insider threat cybersecurity posture; defines investment-based goals to achieve a target state; connects the cybersecurity posture with business processes, functions, and continuity; and finally, helps develop plans to answer critical organizational cybersecurity questions. In this paper, the webtool and its core capabilities are tested by performing an extensive comparative assessment over two different high-profile insider threat incidents.