Biblio

Thousands of people have lost their life by COVID-19 infection. Authorities have seen the calamities caused by the corona virus in China. So, when the trace of virus was found in India, the only possible way to stop the spread of the virus was to go into lockdown. In a country like India where a major part of the population depends on the daily wages, being in lockdown started affecting their life. People where tend to go out for getting the food items and other essentials, and this caused the spread of virus. Many were infected and many lost their life by this. Due to the pandemic, the whole world was affected and many people working in foreign countries lost their jobs as well. These people who came back to India caused further spread of the virus. The main reason for the spread is lack of hygiene and a proper system to monitor the symptoms. Even though our country was in lockdown for almost 6 months the number of COVID cases doesn't get diminished. It is not practical to extend the lockdown any further, and people have decided to live with the virus. But it is essential to take the necessary precautions while interacting with the society. Automated system for checking that all the COVID protocols are followed and early symptom identification before entering to a place are essential to stop the spread of the infection. This research work proposes a smart door system, which evaluates the COVID-19 risk factors and collects the data of person before entering into any place, thereby ensuring that non-infected people are only entering to the place and thus the spread of virus can be avoided.

The need to achieve a suitable level of security in Cyber-Physical Systems (CPS) presents a major challenge for engineers. The unpredictable communication of highly constrained, but safety-relevant systems in a heterogeneous environment, significantly impacts the number and severity of vulnerabilities. Consequently, if security-related weaknesses can successfully be exploited by attackers, the functionality of critical infrastructure could be denied or malfunction. This might consequently threaten life or leak sensitive information. A toolkit to quantitatively express security is essential for security engineers in order to define security-enhancing measurements. For this purpose, security scoring frameworks, like the established Common Vulnerability Scoring System can be used. However, existing security scoring frameworks may not be able to handle the proposed challenges and characteristics of CPS. Therefore, in this work, we aim to elaborate a security scoring system that is tailored to the needs of CPS. In detail, we analyze security on a System-of-Systems level, while considering multiple attacks, as well as potential side effects to other security-related objects. The positive effects of integrated mitigation concepts should also be abbreviated by our proposed security score. Additionally, we generate the security score for interacting AUTOSAR platforms in a highly-connected Vehicle-to-everything (V2x) environment. We refer to this highly relevant use case scenario to underline the benefits of our proposed scoring framework and to prove its effectiveness in CPS.

Scalability is one of the effective features of the Software Defined Network (SDN) that allows several devices to communicate with each other. In SDN scalable networks, the number of hosts keeps increasing as per networks need. This increment makes network administrators take a straightforward action to ensure these hosts' authenticity in the network. To address this issue, we proposed a technique to authenticate SDN hosts before permitting them to establish communication with the SDN controller. In this technique, we used the Kerberos authentication protocol to ensure the authenticity of the hosts. Kerberos verifies the hosts' credentials using a centralized server contains all hosts IDs and passwords. This technique eases the secure communication between the hosts and controller and allows the hosts to safely get network rules and policies. The proposed technique ensures the immunity of the network against network attacks.

With the new coronavirus crisis, medical devices' workload has increased dramatically, leaving them growingly vulnerable to security threats and in need of a comprehensive solution. In this work, we take advantage of the flexible and highly manageable nature of Software Defined Networks (SDN) to design a thoroughgoing security framework that covers a health organization's various security requirements. Our solution comes to be an advanced SDN firewall that solves the issues facing traditional firewalls. It enables the partitioning of the organization's network and the enforcement of different filtering and monitoring behaviors on each partition depending on security conditions. We pursued the network's efficient and dynamic security management with the least human intervention in designing our model which makes it generally qualified to use in networks with different security requirements.

The growing adoption of IoT devices is creating a huge positive impact on human life. However, it is also making the network more vulnerable to security threats. One of the major threats is malicious traffic injection attack, where the hacked IoT devices overwhelm the application servers causing large-scale service disruption. To address such attacks, we propose a Software Defined Networking based predictive alarm manager solution for malicious traffic detection and mitigation at the IoT Gateway. Our experimental results with the proposed solution confirms the detection of malicious flows with nearly 95% precision on average and at its best with around 99% precision.

Industrial Internet is widely used in the production field. As the openness of networks increases, industrial networks facing increasing security risks. Information and communication technologies are now available for most industrial manufacturing. This industry-oriented evolution has driven the emergence of cloud systems, the Internet of Things (IoT), Big Data, and Industry 4.0. However, new technologies are always accompanied by security vulnerabilities, which often expose unpredictable risks. Industrial safety has become one of the most essential and challenging requirements. In this article, we highlight the serious challenges facing Industry 4.0, introduce industrial security issues and present the current awareness of security within the industry. In this paper, we propose solutions for the anomaly detection and defense of the industrial Internet based on the demand characteristics of network security, the main types of intrusions and their vulnerability characteristics. The main work is as follows: This paper first analyzes the basic network security issues, including the network security needs, the security threats and the solutions. Secondly, the security requirements of the industrial Internet are analyzed with the characteristics of industrial sites. Then, the threats and attacks on the network are analyzed, i.e., system-related threats and process-related threats; finally, the current research status is introduced from the perspective of network protection, and the research angle of this paper, i.e., network anomaly detection and network defense, is proposed in conjunction with relevant standards. This paper proposes a software-defined network (SDN)-based industrial Internet security gateway for the security protection of the industrial Internet. Since there are some known types of attacks in the industrial network, in order to fully exploit the effective information, we combine the ExtratreesClassifier to enhance the detection rate of anomaly detection. In order to verify the effectiveness of the algorithm, this paper simulates an industrial network attack, using the acquired training data for testing. The test data are industrial network traffic datasets, and the experimental results show that the algorithm is suitable for anomaly detection in industrial networks.

Internet of Things (IoT) wireless devices has the capability to interconnect small footprint devices and its key purpose is to have seamless connection without operational barriers. It is built upon a three-layer (Perception, Transportation and Application) protocol stack architecture. A multitude of security principles must be imposed at each layer for the proper and efficient working of various IoT applications. In the forthcoming years, it is anticipated that IoT devices will be omnipresent, bringing several benefits. The intrinsic security issues in conjunction with the resource constraints in IoT devices enables the proliferation of security vulnerabilities. The absence of specifically designed IoT frameworks, specifications, and interoperability issues further exacerbate the challenges in the IoT arena. This paper conducts an investigation in IoT wireless security with a focus on the major security challenges and considerations from an IoT protocol stack perspective. The vulnerabilities in the IoT protocol stack are laid out along with a gap analysis, evaluation, and the discussion on countermeasures. At the end of this work, critical issues are highlighted with the aim of pointing towards future research directions and drawing conclusions out of it.

In this paper, a blockchain based scheme is proposed to provide registration, mutual authentication and data sharing in wireless sensor network. The proposed model consists of three types of nodes: coordinators, cluster heads and sensor nodes. A consortium blockchain is deployed on coordinator nodes. The smart contracts execute on coordinators to record the identities of legitimate nodes. Moreover, they authenticate nodes and facilitate in data sharing. When a sensor node communicate and accesses data of any other sensor node, both nodes mutually authenticate each other. The smart contract of data sharing is used to provide a secure communication and data exchange between sensor nodes. Moreover, the data of all the nodes is stored on the decentralized storage called interplanetary file system. The simulation results show the response time of IPFS and message size during authentication and registration.

People are dependent on Trusted Third Party (TTP) administration based Centralized systems for content sharing having a deficit of security, faith, immutability, and clearness. This work has proposed a file-sharing environment based on Blockchain by clouting the Interplanetary File System (IPFS) and Public Key Infrastructure (PKI) systems, advantages for overcoming these troubles. The smart contract is implemented to control the access privilege and the modified version of IPFS software is utilized to enforce the predefined access-control list. An application framework on a secure decentralized file sharing system is presented in combination with IPFS and PKI to secure file sharing. PKI having public and private keys is used to enable encryption and decryption of every file transaction and authentication of identities through Metamask to cryptographically recognize account ownership in the Blockchain system. A gas consumption-based result analysis is done in the private Ethereum network and it attains transparency, security managed access, and quality of data indicating better efficacy of this work.

To ensure a secure Cloud-based Electronic Health Record (EHR) system, we need to encrypt data and impose field-level access control to prevent malicious usage. Since the attributes of the Users will change with time, the encryption policies adopted may also vary. For large EHR systems, it is often necessary to search through the encrypted data in realtime and perform client-side computations without decrypting all patient records. This paper describes our novel cloud-based EHR system that uses Attribute Based Encryption (ABE) combined with Semantic Web technologies to facilitate differential access to an EHR, thereby ensuring only Users with valid attributes can access a particular field of the EHR. The system also includes searchable encryption using keyword index and search trapdoor, which allows querying EHR fields without decrypting the entire patient record. The attribute revocation feature is efficiently managed in our EHR by delegating the revision of the secret key and ciphertext to the Cloud Service Provider (CSP). Our methodology incorporates advanced security features that eliminate malicious use of EHR data and contributes significantly towards ensuring secure digital health systems on the Cloud.

Given that an increasingly larger part of an organization's activity is taking place online, especially in the current situation caused by the COVID-19 pandemic, network log data collected by organizations contain an accurate image of daily activity patterns. In some scenarios, it may be useful to share such data with other parties in order to improve collaboration, or to address situations such as cyber-security incidents that may affect multiple organizations. However, in doing so, serious privacy concerns emerge. One can uncover a lot of sensitive information when analyzing an organization's network logs, ranging from confidential business interests to personal details of individual employees (e.g., medical conditions, political orientation, etc). Our objective is to enable organizations to share information about their network logs, while at the same time preserving data privacy. Specifically, we focus on enabling encrypted search at network flow granularity. We consider several state-of-the-art searchable encryption flavors for this purpose (including hidden vector encryption and inner product encryption), and we propose several customized encoding techniques for network flow information in order to reduce the overhead of applying state-of-the-art searchable encryption techniques, which are notoriously expensive.

Cyberattacks have been the major concern with the growing advancement in technology. Complex security models have been developed to combat these attacks, yet none exhibit a full-proof performance. Recently, several machine learning (ML) methods have gained significant popularity in offering effective and efficient intrusion detection schemes which assist in proactive detection of multiple network intrusions, such as Denial of Service (DoS), Probe, Remote to User (R2L), User to Root attack (U2R). Multiple research works have been surveyed based on adopted ML methods (either signature-based or anomaly detection) and some of the useful observations, performance analysis and comparative study are highlighted in this paper. Among the different ML algorithms in survey, PSO-SVM algorithm has shown maximum accuracy. Using RBF-based classifier and C-means clustering algorithm, a new model i.e., combination of serial and parallel IDS is proposed in this paper. The detection rate to detect known and unknown intrusion is 99.5% and false positive rate is 1.3%. In PIDS (known intrusion classifier), the detection rate for DOS, probe, U2R and R2L is 99.7%, 98.8%, 99.4% and 98.5% and the False positive rate is 0.6%, 0.2%, 3% and 2.8% respectively. In SIDS (unknown intrusion classifier), the rate of intrusion detection is 99.1% and false positive rate is 1.62%. This proposed model has known intrusion detection accuracy similar to PSO - SVM and is better than all other models. Finally the future research directions relevant to this domain and contributions have been discussed.

With the continuous emergence of cyber attacks, the security of industrial control system (ICS) has become a hot issue in academia and industry. Intrusion detection technology plays an irreplaceable role in protecting industrial system from attacks. However, the imbalance between normal samples and attack samples seriously affects the performance of intrusion detection algorithms. This paper proposes SE-IDS, which uses generative adversarial networks (GAN) to expand the minority to make the number of normal samples and attack samples relatively balanced, adopts particle swarm optimization (PSO) to optimize the parameters of LightGBM. Finally, we evaluated the performance of the proposed model on the industrial network dataset.

The power grid is considered to be the most critical piece of infrastructure in the United States because each of the other fifteen critical infrastructures, as defined by the Cyberse-curity and Infrastructure Security Agency (CISA), require the energy sector to properly function. Due the critical nature of the power grid, the ability to detect anomalies in the power grid is of critical importance to prevent power outages, avoid damage to sensitive equipment and to maintain a working power grid. Over the past few decades, the modern power grid has evolved into a large Cyber Physical System (CPS) equipped with wide area monitoring systems (WAMS) and distributed control. As smart technology advances, the power grid continues to be upgraded with high fidelity sensors and measurement devices, such as phasor measurement units (PMUs), that can report the state of the system with a high temporal resolution. However, this influx of data can often become overwhelming to the legacy Supervisory Control and Data Acquisition (SCADA) system, as well as, the power system operator. In this paper, we propose using a deep learning (DL) convolutional neural network (CNN) as a module within the Automatic Network Guardian for ELectrical systems (ANGEL) Digital Twin environment to detect physical faults in a power system. The presented approach uses high fidelity measurement data from the IEEE 9-bus and IEEE 39-bus benchmark power systems to not only detect if there is a fault in the power system but also applies the algorithm to classify which bus contains the fault.

Smart grid (SG) network is one of the recently improved networks of tangled entities, objects, and smart metering infrastructure (SMI). It plays a vital part in sensing, acquiring, observing, aggregating, controlling, and dealing with various kinds of fields in SG. The SMI or advanced metering infrastructure (AMI) is proposed to make available a real-time transmissions connection among users and services are Time of use (TOU), Real time pricing (RTP), Critical Peak Pricing (CPP). In adding to, additional benefit of SMs is which are capable to report back to the service control center in near real time nontechnical losses (for instance, tampering with meters, bypassing meters, and illicit tapping into distribution systems). SMI supports two-way transmission meters reading electrical utilization at superior frequency. This data is treated in real time and signals send to manage demand. This paper expresses a transitory impression of cyberattack instances in customary energy networks and SMI. This paper presents cyber security attacks and countermeasures in Smart Grid Metering Network (SGMN). Based on the existing survey threat models, a number of proposed ways have been planned to deal with all threats in the formulation of the secrecy and privacy necessities of SG measurement network.

With the advancement in the growth of Internet-of-Things (IoT), its number of applications has also increased such as in healthcare, smart cities, vehicles, industries, household appliances, and Smart Grids (SG). One of the major applications of IoT is the SG and smart meter which consists of a large number of internet-connected sensors and can communicate bi-directionally in real-time. The SG network involves smart meters, data collectors, generators, and sensors connected with the internet. SG networks involve the generation, distribution, transmission, and consumption of electrical power supplies. It consists of Household Area Network (HAN), and Neighborhood Area Network (NAN) for communication. Smart meters can communicate bidirectionally with consumers and provide real-time information to utility offices. But this communication channel is a wide-open network for data transmission. Therefore, it makes the SG network and smart meter vulnerable to outside hacker and various Cyber-Physical System (CPS) attacks such as False Data Injection (FDI), inserting malicious data, erroneous data, manipulating the sensor reading values. Here cryptography techniques can play a major role along with the private blockchain model for secure data transmission in smart meters. Hence, to overcome these existing issues and challenges in smart meter communication we have proposed a blockchain-based system model for secure communication along with a novel Advanced Elliptic Curve Cryptography Digital Signature (AECCDS) algorithm in Fog Computing (FC) environment. Here FC nodes will work as miners at the edge of smart meters for secure and real-time communication. The algorithm is implemented using iFogSim, Geth version 1.9.25, Ganache, Truffle for compiling smart contracts, Anaconda (Python editor), and ATOM as language editor for the smart contracts.

In federated learning, machine learning and deep learning models are trained globally on distributed devices. The state-of-the-art privacy-preserving technique in the context of federated learning is user-level differential privacy. However, such a mechanism is vulnerable to some specific model poisoning attacks such as Sybil attacks. A malicious adversary could create multiple fake clients or collude compromised devices in Sybil attacks to mount direct model updates manipulation. Recent works on novel defense against model poisoning attacks are difficult to detect Sybil attacks when differential privacy is utilized, as it masks clients' model updates with perturbation. In this work, we implement the first Sybil attacks on differential privacy based federated learning architectures and show their impacts on model convergence. We randomly compromise some clients by manipulating different noise levels reflected by the local privacy budget ε of differential privacy with Laplace mechanism on the local model updates of these Sybil clients. As a result, the global model convergence rates decrease or even leads to divergence. We apply our attacks to two recent aggregation defense mechanisms, called Krum and Trimmed Mean. Our evaluation results on the MNIST and CIFAR-10 datasets show that our attacks effectively slow down the convergence of the global models. We then propose a method to keep monitoring the average loss of all participants in each round for convergence anomaly detection and defend our Sybil attacks based on the training loss reported from randomly selected sets of clients as the judging panels. Our empirical study demonstrates that our defense effectively mitigates the impact of our Sybil attacks.

Underwater networks have the potential to enable unexplored applications and to enhance our ability to observe and predict the ocean. Underwater acoustic sensor networks (UASNs) are often deployed in unprecedented and hostile waters and face many security threats. Applications based on UASNs such as coastal defense, pollution monitoring, assisted navigation to name a few, require secure communication. A new set of communication protocols and cooperative coordination algorithms have been proposed to enable collaborative monitoring tasks. However, such protocols overlook security as a key performance indicator. Spoofing, altering, or replaying routing information can affect the entire network, making UASN vulnerable to routing attacks such as selective forwarding, sinkhole attack, Sybil attack, acknowledgement spoofing and HELLO flood attack. The lack of security against such threats is startling if maintained that security is indeed an important requirement in many emerging civilian and military applications. In this work, we look at one of the most prevalent attacks among UASNs which is Sybill attack and discuss mitigation approaches for it. Then, feasibly implemented the attack in UnetStack3 to simulate real-life scenario.

The integration of IDS and Internet of Things (IoT) with deep learning plays a significant role in safety. Security has a strong role to play. Application of the IoT network decreases the time complexity and resources. In the traditional intrusion detection systems (IDS), this research work implements the cutting-edge methodologies in the IoT environment. This research is based on analysis, conception, testing and execution. Detection of intrusions can be performed by using the advanced deep learning system and multiagent. The NSL-KDD dataset is used to test the IoT system. The IoT system is used to test the IoT system. In order to detect attacks from intruders of transport layer, efficiency result rely on advanced deep learning idea. In order to increase the system performance, multi -agent algorithms could be employed to train communications agencies and to optimize the feedback training process. Advanced deep learning techniques such as CNN will be researched to boost system performance. The testing part an IoT includes data simulator which will be used to generate in continuous of research work finding with deep learning algorithms of suitable IDS in IoT network environment of current scenario without time complexity.

The COVID-19 pandemic has impacted the world economy and mainly all activities where social distancing cannot be respected. In order to control this pandemic, screening tests such as PCR have become essential. For example, in the case of a trip, the traveler must carry out a PCR test within 72 hours before his departure and if he is not a carrier of the COVID-19, he can therefore travel by presenting, during check-in and boarding, the negative result sheet to the agent. The latter will then verify the presented sheet by trusting: (a) the medical biology laboratory, (b) the credibility of the traveler for not having changed the PCR result from “positive to negative”. Therefore, this confidence and this verification are made without being based on any mechanism of security and integrity, despite the great importance of the PCR test results to control the COVID-19 pandemic. Consequently, we propose in this paper a blockchain-based decentralized trust architecture that aims to guarantee the integrity, immutability and traceability of COVID-19 test results. Our proposal also aims to ensure the interconnection between several organizations (airports, medical laboratories, cinemas, etc.) in order to access COVID-19 test results in a secure and decentralized manner.

Even if there is a rapid proliferation with the advantages of low cost, the emerging on-demand cloud services have led to an increase in cybercrime activities. Cyber criminals are utilizing cloud services through its distributed nature of infrastructure and create a lot of challenges to detect and investigate the incidents by the security personnel. The tracing of command flow forms a clue for the detection of malicious activity occurring in the system through System Calls Analysis (SCA). As machine learning based approaches are known to automate the work in detecting malwares, simple Support Vector Machine (SVM) based approaches are often reporting low value of accuracy. In this work, a malware classification system proposed with the supervised machine learning of unknown malware instances through Support Vector Machine - Stochastic Gradient Descent (SVM-SGD) algorithm. The performance of the system evaluated on CIC-IDS2017 dataset with labelled attacks. The system is compared with traditional signature based detection model and observed to report less number of false alerts with improved accuracy. The signature based detection gets an accuracy of 86.12%, while the SVM-SGD gets the best accuracy of 99.13%. The model is found to be lightweight but efficient in detecting malware with high degree of accuracy.

In this paper, we mainly introduce the security protection technology of smart grid based on edge computing and propose an edge computing security protection architecture based on multi-service flexible mechanism. Aiming at the real time requirements of heterogeneous energy terminal access and power edge computing business in multiple interactive environment, a real-time and strong compatibility terminal security access mechanism integrating physical characteristics and lightweight cryptographic mechanism is proposed. According to different power terminal security data requirements, the edge computing data transmission, processing security and privacy protection technology are proposed. In addition, in the power system of distribution, microgrid and advanced metering system, the application of edge computing has been well reflected. Combined with encryption technology, access authentication, the security defense of edge data, edge equipment and edge application is carried out in many aspects, which strengthens the security and reliability of business penetration and information sharing at the edge of power grid, and realizes the end-to-end and end-to-system security prevention and control of power grid edge computing.

Aiming at the security problems of traditional smart grid data security storage strategy, this paper proposes a smart grid data security storage strategy based on cloud computing platform. Based on the analysis of cloud computing and cloud storage, the security storage of smart grid data is modeled to improve the security storage performance of power system. The dynamic key mechanism is introduced to obtain the initial key information in the key chain and generate the dynamic secret key. The hyperchaotic system is used to obtain the modified bit plane code in the key chain to form the context and decision of data storage. MQ arithmetic encoder is used for entropy coding to generate the corresponding data storage compressed code stream, and the smart grid data storage key is improved. Combined with encryption processing and decryption processing, the secure storage of smart grid data is realized. The experimental results show that the smart grid data security storage strategy based on cloud computing platform increases the security of smart grid data storage.

With the development of IT technology and the generalization of the Internet of Things, smart grid systems combining IoT for efficient power grid construction are being widely deployed. As a form of development for this, edge computing and blockchain technology are being combined with the smart grid. Wang et al. proposed a user authentication scheme to strengthen security in this environment. In this paper, we describe the scheme proposed by Wang et al. and security faults. The first is that it is vulnerable to a side-channel attack, an impersonation attack, and a key material change attack. In addition, their scheme does not guarantee the anonymity of a participant in the smart grid system.

This paper studies the use of Supervisory Control Theory to design and implement post-fault restoration schemes in a HVDC grid. Our study focuses on the synthesis of discrete controllers and on the management of variable control rules during the execution of the protection strategy. The resulting supervisory control system can be proven "free of deadlocks" in the sense that designated tasks are always completed.