Biblio

Hardware Trojan detection has emerged as a critical challenge to ensure security and trustworthiness of integrated circuits. A vast majority of research efforts in this area has utilized side-channel analysis for Trojan detection. Functional test generation for logic testing is a promising alternative but it may not be helpful if a Trojan cannot be fully activated or the Trojan effect cannot be propagated to the observable outputs. Side-channel analysis, on the other hand, can achieve significantly higher detection coverage for Trojans of all types/sizes, since it does not require activation/propagation of an unknown Trojan. However, they have often limited effectiveness due to poor detection sensitivity under large process variations and small Trojan footprint in side-channel signature. In this paper, we address this critical problem through a novel side-channel-aware test generation approach, based on a concept of Multiple Excitation of Rare Switching (MERS), that can significantly increase Trojan detection sensitivity. The paper makes several important contributions: i) it presents in detail the statistical test generation method, which can generate high-quality testset for creating high relative activity in arbitrary Trojan instances; ii) it analyzes the effectiveness of generated testset in terms of Trojan coverage; and iii) it describes two judicious reordering methods can further tune the testset and greatly improve the side channel sensitivity. Simulation results demonstrate that the tests generated by MERS can significantly increase the Trojans sensitivity, thereby making Trojan detection effective using side-channel analysis.

We give attacks on Feistel-based format-preserving encryption (FPE) schemes that succeed in message recovery (not merely distinguishing scheme outputs from random) when the message space is small. For \$4\$-bit messages, the attacks fully recover the target message using \$2textasciicircum1 examples for the FF3 NIST standard and \$2textasciicircum5 examples for the FF1 NIST standard. The examples include only three messages per tweak, which is what makes the attacks non-trivial even though the total number of examples exceeds the size of the domain. The attacks are rigorously analyzed in a new definitional framework of message-recovery security. The attacks are easily put out of reach by increasing the number of Feistel rounds in the standards.

Physical Unclonable Functions (PUFs) measure manufacturing variations inside integrated circuits to derive internal secrets during run-time and avoid to store secrets permanently in non-volatile memory. PUF responses are noisy such that they require error correction to generate reliable cryptographic keys. To date, when needed one single key is reproduced in the field and always used, regardless of its reliability. In this work, we compute online reliability information for a reproduced key and perform multiple PUF readout and error correction steps in case of an unreliable result. This permits to choose the most reliable key among multiple derived key candidates with different corrected error patterns. We achieve the same average key error probability from less PUF response bits with this approach. Our proof of concept design for a popular reference scenario uses Differential Sequence Coding (DSC) and a Viterbi decoder with reliability output information. It requires 39% less PUF response bits and 16% less helper data bits than the regular approach without the option for multiple readouts.

It is estimated that 50% of the global population lives in urban areas occupying just 0.4% of the Earth's surface. Understanding urban activity constitutes monitoring population density and its changes over time, in urban environments. Currently, there are limited mechanisms to non-intrusively monitor population density in real-time. The pervasive use of cellular phones in urban areas is one such mechanism that provides a unique opportunity to study population density by monitoring the mobility patterns in near real-time. Cellular carriers such as AT&T harvest such data through their cell towers; however, this data is proprietary and the carriers restrict access, due to privacy concerns. In this work, we propose a system that passively senses the population density and infers mobility patterns in an urban area by monitoring power spectral density in cellular frequency bands using periodic beacons from each cellphone without knowing who and where they are located. A wireless sensor network platform is being developed to perform spectral monitoring along with environmental measurements. Algorithms are developed to generate real-time fine-resolution population estimates.

Cryptocurrencies, such as Bitcoin and 250 similar alt-coins, embody at their core a blockchain protocol –- a mechanism for a distributed network of computational nodes to periodically agree on a set of new transactions. Designing a secure blockchain protocol relies on an open challenge in security, that of designing a highly-scalable agreement protocol open to manipulation by byzantine or arbitrarily malicious nodes. Bitcoin's blockchain agreement protocol exhibits security, but does not scale: it processes 3–7 transactions per second at present, irrespective of the available computation capacity at hand. In this paper, we propose a new distributed agreement protocol for permission-less blockchains called ELASTICO. ELASTICO scales transaction rates almost linearly with available computation for mining: the more the computation power in the network, the higher the number of transaction blocks selected per unit time. ELASTICO is efficient in its network messages and tolerates byzantine adversaries of up to one-fourth of the total computational power. Technically, ELASTICO uniformly partitions or parallelizes the mining network (securely) into smaller committees, each of which processes a disjoint set of transactions (or "shards"). While sharding is common in non-byzantine settings, ELASTICO is the first candidate for a secure sharding protocol with presence of byzantine adversaries. Our scalability experiments on Amazon EC2 with up to \$1, 600\$ nodes confirm ELASTICO's theoretical scaling properties.

Password vaults are used to store login credentials, usually encrypted by a master password, relieving the user from memorizing a large number of complex passwords. To manage accounts on multiple devices, vaults are often stored at an online service, which substantially increases the risk of leaking the (encrypted) vault. To protect the master password against guessing attacks, previous work has introduced cracking-resistant password vaults based on Honey Encryption. If decryption is attempted with a wrong master password, they output plausible-looking decoy vaults, thus seemingly disabling offline guessing attacks. In this work, we propose attacks against cracking-resistant password vaults that are able to distinguish between real and decoy vaults with high accuracy and thus circumvent the offered protection. These attacks are based on differences in the generated distribution of passwords, which are measured using Kullback-Leibler divergence. Our attack is able to rank the correct vault into the 1.3% most likely vaults (on median), compared to 37.8% of the best-reported attack in previous work. (Note that smaller ranks are better, and 50% is achievable by random guessing.) We demonstrate that this attack is, to a certain extent, a fundamental problem with all static Natural Language Encoders (NLE), where the distribution of decoy vaults is fixed. We propose the notion of adaptive NLEs and demonstrate that they substantially limit the effectiveness of such attacks. We give one example of an adaptive NLE based on Markov models and show that the attack is only able to rank the decoy vaults with a median rank of 35.1%.

Password vaults are used to store login credentials, usually encrypted by a master password, relieving the user from memorizing a large number of complex passwords. To manage accounts on multiple devices, vaults are often stored at an online service, which substantially increases the risk of leaking the (encrypted) vault. To protect the master password against guessing attacks, previous work has introduced cracking-resistant password vaults based on Honey Encryption. If decryption is attempted with a wrong master password, they output plausible-looking decoy vaults, thus seemingly disabling offline guessing attacks. In this work, we propose attacks against cracking-resistant password vaults that are able to distinguish between real and decoy vaults with high accuracy and thus circumvent the offered protection. These attacks are based on differences in the generated distribution of passwords, which are measured using Kullback-Leibler divergence. Our attack is able to rank the correct vault into the 1.3% most likely vaults (on median), compared to 37.8% of the best-reported attack in previous work. (Note that smaller ranks are better, and 50% is achievable by random guessing.) We demonstrate that this attack is, to a certain extent, a fundamental problem with all static Natural Language Encoders (NLE), where the distribution of decoy vaults is fixed. We propose the notion of adaptive NLEs and demonstrate that they substantially limit the effectiveness of such attacks. We give one example of an adaptive NLE based on Markov models and show that the attack is only able to rank the decoy vaults with a median rank of 35.1%.

Defect-prediction techniques can enhance the quality assurance activities for software systems. For instance, they can be used to predict bugs in source files or functions. In the context of a software product line, such techniques could ideally be used for predicting defects in features or combinations of features, which would allow developers to focus quality assurance on the error-prone ones. In this preliminary case study, we investigate how defect prediction models can be used to identify defective features using machine-learning techniques. We adapt process metrics and evaluate and compare three classifiers using an open-source product line. Our results show that the technique can be effective. Our best scenario achieves an accuracy of 73 % for accurately predicting features as defective or clean using a Naive Bayes classifier. Based on the results we discuss directions for future work.

Interpersonal trust is one of the key components of efficient teamwork. Research suggests two main approaches for trust formation: personal information exchange (e.g., social icebreakers), and creating a context of risk and interdependence (e.g., trust falls). However, because these strategies are difficult to implement in an online setting, trust is more difficult to achieve and preserve in distributed teams. In this paper, we argue that games are an optimal environment for trust formation because they can simulate both risk and interdependence. Results of our online experiment show that a social game can be more effective than a social task at fostering interpersonal trust. Furthermore, trust formation through the game is reliable, but trust depends on several contingencies in the social task. Our work suggests that gameplay interactions do not merely promote impoverished versions of the rich ties formed through conversation; but rather engender genuine social bonds. \textbackslash

With its high penetration rate and relatively good clock accuracy, smartphones are replacing watches in several market segments. Modern smartphones have more than one clock source to complement each other: NITZ (Network Identity and Time Zone), NTP (Network Time Protocol), and GNSS (Global Navigation Satellite System) including GPS. NITZ information is delivered by the cellular core network, indicating the network name and clock information. NTP provides a facility to synchronize the clock with a time server. Among these clock sources, only NITZ and NTP are updated without user interaction, as location services require manual activation. In this paper, we analyze security aspects of these clock sources and their impact on security features of modern smartphones. In particular, we investigate NITZ and NTP procedures over cellular networks (2G, 3G and 4G) and Wi-Fi communication respectively. Furthermore, we analyze several European, Asian, and American cellular networks from NITZ perspective. We identify three classes of vulnerabilities: specification issues in a cellular protocol, configurational issues in cellular network deployments, and implementation issues in different mobile OS's. We demonstrate how an attacker with low cost setup can spoof NITZ and NTP messages to cause Denial of Service attacks. Finally, we propose methods for securely synchronizing the clock on smartphones.

Utility networks are part of every nation's critical infrastructure, and their protection is now seen as a high priority objective. In this paper, we propose a threat awareness architecture for critical infrastructures, which we believe will raise security awareness and increase resilience in utility networks. We first describe an investigation of trends and threats that may impose security risks in utility networks. This was performed on the basis of a viewpoint approach that is capable of identifying technical and non-technical issues (e.g., behaviour of humans). The result of our analysis indicated that utility networks are affected strongly by technological trends, but that humans comprise an important threat to them. This provided evidence and confirmed that the protection of utility networks is a multi-variable problem, and thus, requires the examination of information stemming from various viewpoints of a network. In order to accomplish our objective, we propose a systematic threat awareness architecture in the context of a resilience strategy, which ultimately aims at providing and maintaining an acceptable level of security and safety in critical infrastructures. As a proof of concept, we demonstrate partially via a case study the application of the proposed threat awareness architecture, where we examine the potential impact of attacks in the context of social engineering in a European utility company.

Cyberinfrastructure is increasingly becoming target of a wide spectrum of attacks from Denial of
Service to large-scale defacement of the digital presence of an organization. Intrusion Detection System
(IDSs) provide administrators a defensive edge over intruders lodging such malicious attacks. However,
with the sheer number of different IDSs available, one has to objectively assess the capabilities of different
IDSs to select an IDS that meets specific organizational requirements. A prerequisite to enable such
an objective assessment is the implicit comparability of IDS literature. In this study, we review IDS
literature to understand the implicit comparability of IDS literature from the perspective of metrics
used in the empirical evaluation of the IDS. We identified 22 metrics commonly used in the empirical
evaluation of IDS and constructed search terms to retrieve papers that mention the metric. We manually
reviewed a sample of 495 papers and found 159 of them to be relevant. We then estimated the number
of relevant papers in the entire set of papers retrieved from IEEE. We found that, in the evaluation
of IDSs, multiple different metrics are used and the trade-off between metrics is rarely considered. In
a retrospective analysis of the IDS literature, we found the the evaluation criteria has been improving
over time, albeit marginally. The inconsistencies in the use of evaluation metrics may not enable direct
comparison of one IDS to another.

This paper presents a multi-year undergraduate computing capstone project that holistically contributes to the development of cybersecurity knowledge and skills in non-computing high school and college students. We describe the student-built Vulnerable Web Server application, which is a system that packages instructional materials and pre-built virtual machines to provide lessons on cybersecurity to non-technical students. The Vulnerable Web Server learning materials have been piloted at several high schools and are now integrated into multiple security lessons in an intermediate, general education information technology course at the United States Military Academy. Our paper interweaves a description of the Vulnerable Web Server materials with the senior capstone design process that allowed it to be built by undergraduate information technology and computer science students, resulting in a valuable capstone learning experience. Throughout the paper, a call is made for greater emphasis on educating the non-technical user.

MPI includes all processes in MPI\_COMM\_WORLD; this is untenable for reasons of scale, resiliency, and overhead. This paper offers a new approach, extending MPI with a new concept called Sessions, which makes two key contributions: a tighter integration with the underlying runtime system; and a scalable route to communication groups. This is a fundamental change in how we organise and address MPI processes that removes well-known scalability barriers by no longer requiring the global communicator MPI\_COMM\_WORLD.

This panel will discuss and debate what role(s) the information technology discipline should have in cybersecurity. Diverse viewpoints will be considered including current and potential ACM curricular recommendations, current and potential ABET and NSA accreditation criteria, the emerging cybersecurity discipline(s), consideration of government frameworks, the need for a multi-disciplinary approach to cybersecurity, and what aspects of cybersecurity should be under information technology's purview.

Mobile malware attempts to evade detection during app analysis by mimicking security-sensitive behaviors of benign apps that provide similar functionality (e.g., sending SMS mes- sages), and suppressing their payload to reduce the chance of being observed (e.g., executing only its payload at night). Since current approaches focus their analyses on the types of security- sensitive resources being accessed (e.g., network), these evasive techniques in malware make differentiating between malicious and benign app behaviors a difficult task during app analysis. We propose that the malicious and benign behaviors within apps can be differentiated based on the contexts that trigger security- sensitive behaviors, i.e., the events and conditions that cause the security-sensitive behaviors to occur. In this work, we introduce AppContext, an approach of static program analysis that extracts the contexts of security-sensitive behaviors to assist app analysis in differentiating between malicious and benign behaviors. We implement a prototype of AppContext and evaluate AppContext on 202 malicious apps from various malware datasets, and 633 benign apps from the Google Play Store. AppContext correctly identifies 192 malicious apps with 87.7% precision and 95% recall. Our evaluation results suggest that the maliciousness of a security-sensitive behavior is more closely related to the intention of the behavior (reflected via contexts) than the type of the security-sensitive resources that the behavior accesses.

The malware detection arms race involves constant change: malware changes to evade detection and labels change as detection mechanisms react. Recognizing that malware changes over time, prior work has enforced temporally consistent samples by requiring that training binaries predate evaluation binaries. We present temporally consistent labels, requiring that training labels also predate evaluation binaries since training labels collected after evaluation binaries constitute label knowledge from the future. Using a dataset containing 1.1 million binaries from over 2.5 years, we show that enforcing temporal label consistency decreases detection from 91% to 72% at a 0.5% false positive rate compared to temporal samples alone.

The impact of temporal labeling demonstrates the potential of improved labels to increase detection results. Hence, we present a detector capable of selecting binaries for submission to an expert labeler for review. At a 0.5% false positive rate, our detector achieves a 72% true positive rate without an expert, which increases to 77% and 89% with 10 and 80 expert queries daily, respectively. Additionally, we detect 42% of malicious binaries initially undetected by all 32 antivirus vendors from VirusTotal used in our evaluation. For evaluation at scale, we simulate the human expert labeler and show that our approach is robust against expert labeling errors. Our novel contributions include a scalable malware detector integrating manual review with machine learning and the examination of temporal label consistency

We examine the problem of aggregating the results of multiple anti-virus (AV) vendors' detectors into a single authoritative ground-truth label for every binary. To do so, we adapt a well-known generative Bayesian model that postulates the existence of a hidden ground truth upon which the AV labels depend. We use training based on Expectation Maximization for this fully unsupervised technique. We evaluate our method using 279,327 distinct binaries from VirusTotal, each of which appeared for the rst time between January 2012 and June 2014.

Our evaluation shows that our statistical model is consistently more accurate at predicting the future-derived ground truth than all unweighted rules of the form \k out of n" AV detections. In addition, we evaluate the scenario where partial ground truth is available for model building. We train a logistic regression predictor on the partial label information. Our results show that as few as a 100 randomly selected training instances with ground truth are enough to achieve 80% true positive rate for 0.1% false positive rate. In comparison, the best unweighted threshold rule provides only 60% true positive rate at the same false positive rate.

Earth provides natural resources, such as fossil fuels and minerals, that are vital for Europe's economy. As the global demand grows, especially for strategic metals, commodity prices rapidly rise and there is an identifiable risk of an increasing supply shortage of some metals, including those identified as critical to Europe's high technology sector. Hence a major element in any economy's long-term strategy must be to respond to the increasing pressure on natural resources to ensure security of supply for these strategic metals. In today's rapidly changing global economic landscape, mining in the deep sea, specifically at extinct hydrothermal vents and the vast areas covered by polymetallic nodules, has gone from a distant possibility to a likely reality within just a decade. The extremely hostile conditions found on the deep-ocean floor pose specific challenges, both technically and environmentally, which are demanding and entirely different from land-based mining. At present, European offshore industries and marine research institutions have significant experience and technology and are well positioned to develop engineering and knowledge-based solutions to resource exploitation in these challenging and sensitive environments. However, to keep this position there is a need to initiate pilot studies to develop breakthrough methodologies for the exploration, assessment and extraction of deep-sea minerals, as well as investigate the implications for economic and environmental sustainability. The Blue Mining project will address all aspects of the entire value chain in this field, from resource discovery to resource assessment, from exploitation technologies to the legal and regulatory framework.

In this research, we focus on context independent continuous authentication that reacts on every separate action performed by a user. The experimental data was collected in a complete uncontrolled condition from 53 users by using our data collection software. In our analysis, we considered both keystroke and mouse usage behaviour patterns to prevent a situation where an attacker avoids detection by restricting to one input device because the continuous authentication system only checks the other input device. The best result obtained from this research is that for 47 bio-metric subjects we have on average 275 actions required to detect an imposter where these biometric subjects are never locked out from the system.