Biblio

The emergence of the Internet of Things (IoT) is not only a global revolution in the information industry, but also brought tremendous changes to our lives. With the development of the technology and means of the IoT, information security issues have gradually emerged, and intrusion attacks have become one of the main problems of the IoT network security. The network layer of the IoT is the key connecting the platform and sensors or controllers of the IoT, and it is also the most standardized, the strongest and the most mature part of the whole physical network architecture. Its large-scale development has led to the network layer's security issues will receive more attention and face more challenges. This paper proposes an intrusion detection algorithm deployed on the network layer of the IoT, which uses the BPSO algorithm to extract features from the NSL-KDD dataset, and applies support vector machines (SVM) as the core model of the algorithm to detect and identify abnormal data, especially DoS attacks. Experimental results show that the model's detection rate of abnormal data and DoS attacks are significantly improved.

The paper considers the issue of recurrent neural networks applicability for detecting industrial process anomalies to detect intrusion in Industrial Control Systems. Cyberattack on Industrial Control Systems often leads to appearing of anomalies in industrial process. Thus, it is proposed to detect such anomalies by forecasting the state of an industrial process using a recurrent neural network and comparing the predicted state with actual process' state. In the course of experimental research, a recurrent neural network with one-dimensional convolutional layer was implemented. The Secure Water Treatment dataset was used to train model and assess its quality. The obtained results indicate the possibility of using the proposed method in practice. The proposed method is characterized by the absence of the need to use anomaly data for training. Also, the method has significant interpretability and allows to localize an anomaly by pointing to a sensor or actuator whose signal does not match the model's prediction.

Cyber-attacks detection in modern power systems is undoubtedly indispensable to enhance their resilience and guarantee the continuous production of electricity. As the number of attacks is very small compared to normal events, and attacks are unpredictable, it is not obvious to build a model for attacks. Here, only anomaly-free measurements are utilized to build a reference model for intrusion detection. Specifically, this study presents an unsupervised intrusion detection approach using the k-nearest neighbor algorithm and exponential smoothing monitoring scheme for uncovering attacks in modern power systems. Essentially, the k-nearest neighbor algorithm is implemented to compute the deviation between actual measurements and the faultless (training) data. Then, the exponential smoothing method is used to set up a detection decision-based kNN metric for anomaly detection. The proposed procedure has been tested to detect cyber-attacks in a two-line three-bus power transmission system. The proposed approach has been shown good detection performance.

Though intrusion detection systems provide actionable alerts based on signature-based or anomaly-based traffic patterns, the majority of systems still rely on human analysts to identify and contain the root cause of security incidents. This process is naturally susceptible to human error and is time-consuming, which may allow for further enumeration and pivoting within a compromised environment. Through this paper, we have augmented traditional signature-based network intrusion detection systems with a trust framework whose reduction and redemption values are a function of the severity of the incident, the degree of connectivity of nodes and the time elapsed. A lightweight implementation on the nodes coupled with a multithreaded approach on the central trust server has shown the capability to scale to larger networks with high traffic volumes and a varying proportion of suspicious traffic patterns.

With the explosive growth of IoT applications, billions of things are now connected via edge devices and a colossal volume of data is sent over the internet. Providing security to the user data becomes crucial. The rise in zero-day attacks are a challenge in IoT scenarios. With the large scale of IoT application detection and mitigation of such attacks by the network administrators is cumbersome. The edge device Raspberry pi is remotely logged using Secure Shell (SSH) protocol in 90% of the IoT applications. The case study of SSH brute force attack on the edge device Raspberry pi is demonstrated with experimentation in the IoT networking scenario using Intrusion Detection System (IDS). The IP crawlers available on the internet are used by the attacker to obtain the IP address of the edge device. The proposed system continuously monitors traffic, analysis the log of attack patterns, detects and mitigates SSH brute attack. An attack hijacks and wastes the system resources depriving the authorized users of the resources. With the proposed IDS, we observe 25% CPU conservation, 40% power conservation and 10% memory conservation in resource utilization, as the IDS, mitigates the attack and releases the resources blocked by the attacker.

With the continuous emergence of cyber attacks, the security of industrial control system (ICS) has become a hot issue in academia and industry. Intrusion detection technology plays an irreplaceable role in protecting industrial system from attacks. However, the imbalance between normal samples and attack samples seriously affects the performance of intrusion detection algorithms. This paper proposes SE-IDS, which uses generative adversarial networks (GAN) to expand the minority to make the number of normal samples and attack samples relatively balanced, adopts particle swarm optimization (PSO) to optimize the parameters of LightGBM. Finally, we evaluated the performance of the proposed model on the industrial network dataset.

Cyberattacks have been the major concern with the growing advancement in technology. Complex security models have been developed to combat these attacks, yet none exhibit a full-proof performance. Recently, several machine learning (ML) methods have gained significant popularity in offering effective and efficient intrusion detection schemes which assist in proactive detection of multiple network intrusions, such as Denial of Service (DoS), Probe, Remote to User (R2L), User to Root attack (U2R). Multiple research works have been surveyed based on adopted ML methods (either signature-based or anomaly detection) and some of the useful observations, performance analysis and comparative study are highlighted in this paper. Among the different ML algorithms in survey, PSO-SVM algorithm has shown maximum accuracy. Using RBF-based classifier and C-means clustering algorithm, a new model i.e., combination of serial and parallel IDS is proposed in this paper. The detection rate to detect known and unknown intrusion is 99.5% and false positive rate is 1.3%. In PIDS (known intrusion classifier), the detection rate for DOS, probe, U2R and R2L is 99.7%, 98.8%, 99.4% and 98.5% and the False positive rate is 0.6%, 0.2%, 3% and 2.8% respectively. In SIDS (unknown intrusion classifier), the rate of intrusion detection is 99.1% and false positive rate is 1.62%. This proposed model has known intrusion detection accuracy similar to PSO - SVM and is better than all other models. Finally the future research directions relevant to this domain and contributions have been discussed.

An Intrusion Detection System (IDS) is a core element for securing critical systems. An IDS can use signatures of known attacks, or an anomaly detection model for detecting unknown attacks. Attacking an IDS is often the entry point of an attack against a critical system. Consequently, the security of IDSs themselves is imperative. To secure model-based IDSs, we propose a method to authenticate the anomaly detection model. The anomaly detection model is an autoencoder for which we only have access to input-output pairs. Inputs consist of time windows of values from sensors and actuators of an Industrial Control System. Our method is based on a multipath Neural Network (NN) classifier, a newly proposed deep learning technique. The idea is to characterize errors of an IDS's autoencoder by using a multipath NN's confidence measure \$c\$. We use the Wilcoxon-Mann-Whitney (WMW) test to detect a change in the distribution of the summary variable \$c\$, indicating that the autoencoder is not working properly. We compare our method to two baselines. They consist in using other summary variables for the WMW test. We assess the performance of these three methods using simulated data. Among others, our analysis shows that: 1) both baselines are oblivious to some autoencoder spoofing attacks while 2) the WMW test on a multipath NN's confidence measure enables detecting eventually any autoencoder spoofing attack.

Edge computing promises higher bandwidth and lower latency to end-users. However, edge servers usually have limited computing resources and are geographically distributed over the edge. This imposes new challenges for efficient system monitoring and control of edge servers.In this paper, we propose EdgeVMI, a framework to monitor and control services running on edge servers with lightweight virtual machine introspection(VMI). The key of our technique is to run the monitor in a lightweight virtual machine which can leverage hardware events for monitoring memory read and writes. In addition, the small binary size and memory footprints of the monitor could reduce the start/stop time of service, the runtime overhead, as well as the deployment efforts.Inspired by unikernels, we build our monitor with only the necessary system modules, libraries, and functionalities of a specific monitor task. To reduce the security risk of the monitoring behavior, we separate the monitor into two isolated modules: one acts as a sensor to collect security information and another acts as an actuator to conduct control commands. Our evaluation shows the effectiveness and the efficiency of the monitoring system, with an average performance overhead of 2.7%.

Many information systems have been around for several decades, and most of them have their underlying databases. The data accumulated in those databases over the years could be a very valuable asset, which must be protected. The first role of database auditing is to ensure and confirm that security measures are set correctly. However, tracing user behavior and collecting a rich audit trail enables us to use that trail in a more proactive ways. As an example, audit trail could be analyzed ad hoc and used to prevent intrusion, or analyzed afterwards, to detect user behavior patterns, forecast workloads, etc. In this paper, we present a simple, secure, configurable, role-separated, and effective in-database auditing subsystem, which can be used as a base for access control, intrusion detection, fraud detection and other security-related analyses and procedures. It consists of a management relations, code and data object generators and several administrative tools. This auditing subsystem, implemented in several information systems, is capable of keeping the entire audit trail (data history) of a database, as well as all the executed SQL statements, which enables different security applications, from ad hoc intrusion prevention to complex a posteriori security analyses.

Intrusion detection method cautions and through build recognition rate. Through determine worries forth execution support vector machine (SVM), multilayer perceptron and different procedures have endured utilized trig ongoing work. Such strategies show impediments & persist not effective considering use trig enormous informational indexes, considering example, outline & system information. Interruption recognition outline utilized trig examining colossal traffic information; consequently, a proficient grouping strategy important through beat issue. Aforementioned issue considered trig aforementioned paper. Notable AI methods, specifically, SVM, arbitrary backwoods, & extreme learning machine (ELM) persist applied. These procedures persist notable trig view epithetical their capacity trig characterization. NSL-information revelation & knowledge mining informational collection components. Outcomes demonstrate a certain ELM beats different methodologies.

Monitoring and managing electric power generation, distribution and transmission requires supervisory control and data acquisition (SCADA) systems. As technology has developed, these systems have become huge, complicated, and distributed, which makes them susceptible to new risks. In particular, the lack of security in SCADA systems make them a target for network attacks such as denial of service (DoS) and developing solutions for this issue is the main objective of this thesis. By reviewing various existing system solutions for securing SCADA systems, a new security approach is recommended that employs Artificial Intelligence(AI). AI is an innovative approach that imparts learning ability to software. Here deep learning algorithms and machine learning algorithms are used to develop an intrusion detection system (IDS) to combat cyber-attacks. Various methods and algorithms are evaluated to obtain the best results in intrusion detection. The results reveal the Bi-LSTM IDS technique provides the highest intrusion detection (ID) performance compared with previous techniques to secure SCADA systems

It has been recognized that artificial intelligence (AI) will play an important role in future societies. AI has already been incorporated in many industries to improve business processes and automation. Although the aviation industry has successfully implemented flight management systems or autopilot to automate flight operations, it is expected that full embracement of AI remains a challenge. Given the rigorous validation process and the requirements for the highest level of safety standards and risk management, AI needs to prove itself being safe to operate. This paper addresses the safety issues of AI deployment in an aviation network compatible with the Future Communication Infrastructure that utilizes heterogeneous wireless access technologies for communications between the aircraft and the ground networks. It further considers the exploitation of software defined networking (SDN) technologies in the ground network while the adoption of SDN in the airborne network can be optional. Due to the nature of centralized management in SDN-based network, the SDN controller can become a single point of failure or a target for cyber attacks. To countermeasure such attacks, an intrusion detection system utilises AI techniques, more specifically deep neural network (DNN), is considered. However, an adversary can target the AI-based intrusion detection system. This paper examines the impact of AI security attacks on the performance of the DNN algorithm. Poisoning attacks targeting the DSL-KDD datasets which were used to train the DNN algorithm were launched at the intrusion detection system. Results showed that the performance of the DNN algorithm has been significantly degraded in terms of the mean square error, accuracy rate, precision rate and the recall rate.

With current IoT architectures, once a single device in a network is compromised, it can be used to disrupt the behavior of other devices on the same network. Even though system administrators can secure critical devices in the network using best practices and state-of-the-art technology, a single vulnerable device can undermine the security of the entire network. The goal of this work is to limit the ability of an attacker to exploit a vulnerable device on an IoT network and fabricate deceitful messages to co-opt other devices. The approach is to limit attackers by using device proxies that are used to retransmit and control network communications. We present an architecture that prevents deceitful messages generated by compromised devices from affecting the rest of the network. The design assumes a centralized and trustworthy machine that can observe the behavior of all devices on the network. The central machine collects application layer data, as opposed to low-level network traffic, from each IoT device. The collected data is used to train models that capture the normal behavior of each individual IoT device. The normal behavioral data is then used to monitor the IoT devices and detect anomalous behavior. This paper reports on our experiments using both a binary classifier and a density-based clustering algorithm to model benign IoT device behavior with a realistic test-bed, designed to capture normal behavior in an IoT-monitored environment. Results from the IoT testbed show that both the classifier and the clustering algorithms are promising and encourage the use of application-level data for detecting compromised IoT devices.

Protocol detection is the process of determining the application layer protocol in the context of network security monitoring, which requires a timely and precise decision to enable protocol-specific deep packet inspection. This task has proven to be complex, as isolated characteristics, like port numbers, are not sufficient to reliably determine the application layer protocol. In this paper, we analyze the Dynamic Protocol Detection mechanisms employed by popular and widespread open-source network monitoring tools. On the example of HTTP, we show that all analyzed detection mechanisms are vulnerable to evasion attacks. This poses a serious threat to real-world monitoring operations. We find that the underlying fundamental problem of protocol disambiguation is not adequately addressed in two of three monitoring systems that we analyzed. To enable adequate operational decisions, this paper highlights the inherent trade-offs within Dynamic Protocol Detection.

Network traffic attacks are increasingly common and varied, this is a big problem especially when the target network is centralized. The creation of IDS (Intrusion Detection Systems) capable of detecting various types of attacks is necessary. Machine learning algorithms are widely used in the classification of data, bringing a good result in the area of computer networks. In addition, the analysis of entropy and distance between data sets are also very effective in detecting anomalies. However, each technique has its limitations, so this work aims to study their combination in order to improve their performance and create a new intrusion detection system capable of well detect some of the most common attacks. Reliability indices will be used as metrics to the combination decision and they will be updated in each new dataset according to the decision made earlier.

Cryptojacking, the appropriation of users' computational resources without their knowledge or consent to obtain cryp-tocurrencies, is a widespread attack, relatively easy to implement and hard to detect. Either browser-based or binary, cryptojacking lacks robust and reliable detection solutions. This paper presents a hybrid approach to detect cryptojacking where no previous knowledge about the attacks or training data is needed. Our Cryp-tojacking Intrusion Detection Approach, Cryingjackpot, extracts and combines flow and performance counter-based features, aggregating hosts with similar behavior by using unsupervised machine learning algorithms. We evaluate Cryingjackpot experimentally with both an artificial and a hybrid dataset, achieving F1-scores up to 97%.

The ability to react to a malicious attack starts with high fidelity recognition, and with that, an agile response to the attack. The current Operational Technology (OT) systems for a critical infrastructure include an intrusion detection system (IDS), but the ability to adapt to an intrusion is a human initiated response. Orchestrators, which are coming of age in the financial sector and allow for levels of automated response, are not prevalent in the OT space. To evolve to such responses in the OT space, a tradeoff analysis is first needed. This tradeoff analysis should evaluate the mitigation benefits of responses versus the physical affects that result. Providing an informed and automated response decision. This paper presents a formulation of a novel tradeoff analysis and its use in advancing a cyber-physical architecture for automated responses (CyPhAAR).

Looking at the Smart Grid as a Cyber - Physical system of great complexity, the paper synthesizes the main IT security issues that may arise. Security issues are seen from a hybrid point of view, combining theory of information with system theory. Smart Grid has changed dramatically over the past years. With modern technologies, such as Big Data or Internet of Things (IoT), the Smart Grid is evolving into a more interconnected and dynamic power network model.

Security maintenance of Supervisory Control and Data Acquisition (SCADA) systems has been a point of interest during recent years. Numerous research works have been dedicated to the design of intrusion detection systems for securing SCADA communications. Nevertheless, these data-driven techniques are usually dependant on the quality of the monitored data. In this work, we propose a novel feature selection approach, called MSFS, to tackle undesirable quality of data caused by feature redundancy. In contrast to most feature selection techniques, the proposed method models each class in a different subspace, where it is optimally discriminated. This has been accomplished by resorting to ensemble learning, which enables the usage of multiple feature sets in the same feature space. The proposed method is then utilized to perform intrusion detection in smaller subspaces, which brings about efficiency and accuracy. Moreover, a comparative study is performed on a number of advanced feature selection algorithms. Furthermore, a dataset obtained from the SCADA system of a gas pipeline is employed to enable a realistic simulation. The results indicate the proposed approach extensively improves the detection performance in terms of classification accuracy and standard deviation.

One of the most important issues in the development of the Internet of Things (IoT) is network security. The deep packet inspection (DPI) is a promising technology that helps to detection and protection against network attacks. The DPI software system for IoT is developed in this paper. The system for monitoring and analyzing IoT traffic to detect anomalies and identify attacks based on Hurst parameter is proposed. This system makes it possible to determine the Hurst flow parameter at different intervals of observation. This system can be installed on a network provider to use more effectively the bandwidth.

Intrusion Detection System is a well-known term in the domain of Network and Information Security. It's one of the important components of the Network and Information Security infrastructure. Host Intrusion Detection System (HIDS) helps to detect unauthorized use, abnormal and malicious activities on the host, whereas Network Intrusion Detection System (NIDS) helps to detect attacks and intrusion on networks. Various researchers are actively working on different approaches to improving the IDS performance and many improvements have been achieved. However, development in many other technologies and newly emerging techniques always opens the doors of opportunity to add a sharp edge to IDS and to make it more robust and reliable. This paper proposes the development of Distributed Intrusion Detection System (DIDS) using emerging and promising technologies like Blockchain upon a stable platform like cloud infrastructure.

More than 75% of the Internet traffic is now encrypted, while this percentage is constantly increasing. The majority of communications are secured using common encryption protocols such as SSL/TLS and IPsec to ensure security and protect the privacy of Internet users. Yet, encryption can be exploited to hide malicious activities. Traditionally, network traffic inspection is based on techniques like deep packet inspection (DPI). Common applications for DPI include but are not limited to firewalls, intrusion detection and prevention systems, L7 filtering and packet forwarding. The core functionality of such DPI implementations is based on pattern matching that enables searching for specific strings or regular expressions inside the packet contents. With the widespread adoption of network encryption though, DPI tools that rely on packet payload content are becoming less effective, demanding the development of more sophisticated techniques in order to adapt to current network encryption trends. In this work, we present HeaderHunter, a fast signature-based intrusion detection system even in encrypted network traffic. We generate signatures using only network packet metadata extracted from packet headers. Also, to cope with the ever increasing network speeds, we accelerate the inner computations of our proposed system using off-the-shelf GPUs.

The widespread application of 5G will make intrusion detection of large-scale network traffic a mere need. However, traditional intrusion detection cannot meet the requirements by manually extracting features, and the existing AI methods are also relatively inefficient. Therefore, when performing intrusion detection tasks, they have significant disadvantages of high false alarm rates and low recognition performance. For this challenge, this paper proposes a novel hybrid network, RULA-IDS, which can perform intrusion detection tasks by great amount statistical data from the network monitoring system. RULA-IDS consists of the fully connected layer, the feature extraction layer, the global attention mechanism layer and the SVM classification layer. In the feature extraction layer, the residual U-Net and LSTM are used to extract the spatial and temporal features of the network traffic attributes. It is worth noting that we modified the structure of U-Net to suit the intrusion detection task. The global attention mechanism layer is then used to selectively retain important information from a large number of features and focus on those. Finally, the SVM is used as a classifier to output results. The experimental results show that our method outperforms existing state-of-the-art intrusion detection methods, and the accuracies of training and testing are improved to 97.01% and 98.19%, respectively, and presents stronger robustness during training and testing.

Microservice architectures adoption is growing expeditiously in market size and adoption, including in business-critical systems. This is due to agility in development and deployment further increased by containers and their characteristics. Ensuring security is still a major concern due to challenges faced such as resource separation and isolation, as improper access to one service might compromise complete systems. This doctoral work intends to advance the security of microservice systems through research and improvement of methodologies for detection, tolerance and mitigation of security intrusions, while overcoming challenges related to multi-tenancy, heterogeneity, dynamicity of systems and environments. Our preliminary research shows that host-based IDSes are applicable in container environments. This will be extended to dynamic scenarios, serving as a steppingstone to research intrusion tolerance techniques suited to these environments. These methodologies will be demonstrated in realistic microservice systems: complex, dynamic, scalable and elastic.