Biblio

With increase in distributed energy resources (DERs) and smart loads, each energy resource and load need a separate power conversion system leading to complex coordination and interaction, reduced energy conversion efficiency, coordinating compliance to grid standards (IEEE 1547) from multiple sources, reduced security. Also, multiple vendors with legacy system designs and proprietary communications interfaces result in redundancy and increase in cost of power electronics systems. This paper presents an energy router concept for buildings applications which provides autonomous power flow between sources and loads with a novel agent-based software interface.

With the proliferation of Mobile Internet, handheld devices are facing continuous threats from apps that contain malicious intents. These malicious apps, or malware, have the capability of dynamically changing their intended code as they spread. Moreover, the diversity and volume of their variants severely undermine the effectiveness of traditional defenses, which typically use signature-based techniques, and make them unable to detect the previously unknown malware. However, the variants of malware families share typical behavioral patterns reflecting their origin and purpose. The behavioral patterns, obtained either statically or dynamically, can be exploited to detect and classify unknown malware into their known families using machine learning techniques. In this paper, we propose a new approach for detecting and analyzing a malware. Mainly focused on android apps, our approach adopts the two following steps: (1) performs a transformation of an APK file into a lightweight RGB image using a predefined dictionary and intelligent mapping, and (2) trains a convolutional neural network on the obtained images for the purpose of signature detection and malware family classification. The results obtained using the Androzoo dataset show that our system classifies both legacy and new malware apps with high accuracy, low false-negative rate (FNR), and low false-positive rate (FPR).

Accurate traffic classification is fundamentally important for various network activities such as fine-grained network management and resource utilisation. Port-based approaches, deep packet inspection and machine learning are widely used techniques to classify and analyze network traffic flows. However, over the past several years, the growth of Internet traffic has been explosive due to the greatly increased number of Internet users. Therefore, both port-based and deep packet inspection approaches have become inefficient due to the exponential growth of the Internet applications that incurs high computational cost. The emerging paradigm of software-defined networking has reshaped the network architecture by detaching the control plane from the data plane to result in a centralised network controller that maintains a global view over the whole network on its domain. In this paper, we propose a new deep learning model for software-defined networks that can accurately identify a wide range of traffic applications in a short time, called Deep-SDN. The performance of the proposed model was compared against the state-of-the-art and better results were reported in terms of accuracy, precision, recall, and f-measure. It has been found that 96% as an overall accuracy can be achieved with the proposed model. Based on the obtained results, some further directions are suggested towards achieving further advances in this research area.

Recent years have witnessed several educational innovations to provide effective and engaging classroom instruction with the integration of immersive interactions based on augmented reality and virtual reality (AR/VR). This paper outlines the development of an ARCore-based application (app) that can impart interactive experiences for hands-on learning in engineering laboratories. The ARCore technology enables a smartphone to sense its environment and detect horizontal and vertical surfaces, thus allowing the smartphone to estimate any position in its workspace. In this mobile app, with touch-based interaction and AR feedback, the user can interact with a wheeled mobile robot and reinforce the concepts of kinematics for a differential drive mobile robot. The user experience is evaluated and system performance is validated through a user study with participants. The assessment shows that the proposed AR interface for interacting with the experimental setup is intuitive, easy to use, exciting, and recommendable.

The wonder of cyberbullying, implied as persistent and repeated mischief caused through the use of PC systems, mobile phones, and noteworthy propelled contraptions. for instance, Hinduja and Patching upheld that 10-forty% of outlined children masses surrendered having dealt with it each as a harmed individual or as a with the guide of the use of-stander wherein additional progressively young individuals use development to issue, undermine, embarrass, or by and large burden their mates. Advanced badgering has starting at now been said as one which reason first rate harm to society and monetary machine. Advances in development related with web record remark and the assortment of the web associations renders the area and following of such models as a credibility hard and extremely problematic. This paper portrays a web structure for robotized revelation and seeing of Cyber-tormenting cases from on-line exchanges and on line associations. The device is mainly assembled completely absolutely as for the revelation of 3 basic ordinary language sections like Insults, Swears and 2d person. A sort machine and cosmology like reasoning had been contracted to go over the normality of such substances inside the trade board/web documents, which may conceivable explanation a message to security in case you have to take fitting improvement. The instrument has been dissected on staggering social occasions and achieves less steeply-esteemed acknowledgment displays.

The real-time information of enemy locations is capable to transform the outcome of combat operations. Such information gathered using connected soldiers on the Internet of Battlefield Things (IoBT) is highly beneficial to create situational awareness (SA) and to plan an effective war strategy. This article presents the novel enemy localization method that uses the soldier's own locations and their gunshot direction. The hardware prototype has been developed that uses a triangulation for an enemy localization in two soldiers and a single enemy scenario. 4.24±1.77 m of average localization error and ±4° of gunshot direction error has been observed during this prototype testing. This basic model is further extended using three-stage software simulation for multiple soldiers and multiple enemy scenarios with the necessary assumptions. The effective algorithm has been proposed, which differentiates between the ghost and true predictions by analyzing the groups of subsequent shooting intents (i.e., frames). Four different complex scenarios are tested in the first stage of the simulation, around three to six frames are required for the accurate enemy localization in the relatively simple cases, and nine frames are required for the complex cases. The random error within ±4° in gunshot direction is included in the second stage of the simulation which required almost double the number of frames for similar four cases. As the number of frames increases, the accuracy of the proposed algorithm improves and better ghost point elimination is observed. In the third stage, two conventional clustering algorithms are implemented to validate the presented work. The comparative analysis shows that the proposed algorithm is faster, computationally simple, consistent, and reliable compared with others. Detailed analysis of hardware and software results for various scenarios has been discussed in this article.

Various Machine Learning techniques are considered to be "black-boxes" because of their limited interpretability and explainability. This cannot be afforded, especially in the domain of Cyber-Physical Systems, where there can be huge losses of infrastructure of industries and Governments. Supervisory Control And Data Acquisition (SCADA) systems need to detect and be protected from cyber-attacks. Thus, we need to adopt approaches that make the system secure, can explain predictions made by model, and interpret the model in a human-understandable format. Recently, Autoencoders have shown great success in attack detection in SCADA systems. Numerous interpretable machine learning techniques are developed to help us explain and interpret models. The work presented here is a novel approach to use techniques like Local Interpretable Model-Agnostic Explanations (LIME) and Layer-wise Relevance Propagation (LRP) for interpretation of Autoencoder networks trained on a Gas Pipelines Control System to detect attacks in the system.

MIL-STD-1553 is a military standard that defines the specification of a serial communication bus that has been implemented in military and aerospace avionic platforms for over 40 years. MIL-STD-1553 was designed for a high level of fault tolerance while less attention was paid to cyber security issues. Thus, as indicated in recent studies, it is exposed to various threats. In this article, we suggest enhancing the security of MIL-STD-1553 communication buses by integrating a machine learning-based intrusion detection system (IDS); such anIDS will be capable of detecting cyber attacks in real time. The IDS consists of two modules: 1) a remote terminal (RT) authentication module that detects illegitimately connected components and data transfers and 2) a sequence-based anomaly detection module that detects anomalies in the operation of the system. The IDS showed high detection rates for both normal and abnormal behavior when evaluated in a testbed using real 1553 hardware, as well as a very fast and accurate training process using logs from a real system. The RT authentication module managed to authenticate RTs with +0.99 precision and +0.98 recall; and detect illegitimate component (or a legitimate component that impersonates other components) with +0.98 precision and +0.99 recall. The sequence-based anomaly detection module managed to perfectly detect both normal and abnormal behavior. Moreover, the sequencebased anomaly detection module managed to accurately (i.e., zero false positives) model the normal behavior of a real system in a short period of time ( 22 s).

With the rapid development of Internet, the issue of cyber security has increasingly gained more attention. An intrusion Detection System (IDS) is an effective technique to defend cyber-attacks and reduce security losses. However, the challenge of IDS lies in the diversity of cyber-attackers and the frequently-changing data requiring a flexible and efficient solution. To address this problem, machine learning approaches are being applied in the IDS field. In this paper, we propose an efficient scalable neural-network-based hybrid IDS framework with the combination of Host-level IDS (HIDS) and Network-level IDS (NIDS). We applied the autoencoders (AE) to NIDS and designed HIDS using word embedding and convolutional neural network. To evaluate the IDS, many experiments are performed on the public datasets NSL-KDD and ADFA. It can detect many attacks and reduce the security risk with high efficiency and excellent scalability.

Parallel with the developing world, transportation technologies have started to expand and change significantly year by year. This change brings with it some inevitable problems. Increasing human population and growing transportation-needs result many accidents in urban and rural areas, and this recursively results extra traffic problems and fuel consumption. It is obvious that the issues brought by this spiral loop needed to be solved with the use of some new technological achievements. In this context, self-driving cars or automated vehicles concepts are seen as a good solution. However, this also brings some additional problems with it. Currently many cars are provided with some digital security systems, which are examined in two phases, internal and external. These systems are constructed in the car by using some type of embedded system (such as the Controller Area Network (CAN)) which are needed to be protected form outsider cyberattacks. These attack can be detected by several ways such as rule based system, anomaly based systems, list based systems, etc. The current literature showed that researchers focused on the use of some artificial intelligence techniques for the detection of this type of attack. In this study, an intrusion detection system based on machine learning is proposed for the CAN security, which is the in-vehicle communication structure. As a result of the study, it has been observed that the decision tree-based ensemble learning models results the best performance in the tested models. Additionally, all models have a very good accuracy levels.

With the advent of IoT devices and exponential growth of nodes on the internet, computer networks are facing new challenges, with one of the more important ones being DDoS attacks. In this paper, new features to detect initiation and termination of DDoS attacks are investigated. The method to extract these features is devised with respect to some openflowbased switch capabilities. These features provide us with a higher resolution to view and process packet count entropies, thus improving DDoS attack detection capabilities. Although some of the technical assumptions are based on SDN technology and openflow protocol, the methodology can be applied in other networking paradigms as well.

Human identification is a well-researched topic that keeps evolving. Advancement in technology has made it easy to train models or use ones that have been already created to detect several features of the human face. When it comes to identifying a human face from the side, there are many opportunities to advance the biometric identification research further. This paper investigates the human face identification based on their side profile by extracting the facial features and diagnosing the feature sets with geometric ratio expressions. These geometric ratio expressions are computed into feature vectors. The last stage involves the use of weighted means to measure similarity. This research addresses the problem of using an eXplainable Artificial Intelligence (XAI) approach. Findings from this research, based on a small data-set, conclude that the used approach offers encouraging results. Further investigation could have a significant impact on how face profiles can be identified. Performance of the proposed system is validated using metrics such as Precision, False Acceptance Rate, False Rejection Rate and True Positive Rate. Multiple simulations indicate an Equal Error Rate of 0.89.

As a typical representative of a new generation military information technology, the value and significance of Internet of Battlefield Things (IoBT) has been widely recognized by the world's military forces. At the same time, Internet of Battlefield Things (IoBT) is facing serious scalability and security challenges. This paper presents the basic concept and six-domain model of IoBT, explains the integration security framework of IoBT and blockchain. Furthermore, we design and build a novel IoT framework called IoBTChain based on blockchain and smart contracts, which adopts a credit-based resource management system to control the amount of resources that an IoBT device can obtain from a cloud server based on pre-defined priority rules, application types, and behavior history. We illustrate the deployment procedure of blockchain and smart contracts, the device registration procedure on blockchain, the IoBT behavior regulation workflow and the pricing-based resource allocation algorithm.

Electricity has become the primary need of human life. The emerging of IoT concept recently in our lives, has offered the chance to establish energy efficient smart devices, systems and cities. Due to the urging need for conserving energy, this paper proposes an IoT based wireless energy efficient smart metering systems for smart cities. A network of smart meters is achieved to deliver the energy consumption data to the Energy/Utility provider. The star and mesh topologies are used in creating the network of smart meters in order to increase the distance of coverage. The proposed system offers an easily operated application for users as well as a Website and database for electricity Supplier Company. The proposed system design has an accuracy level of 95% and it is about 35% lower cost than its peer in the global market. The proposed design reduced the power consumption by 25%.

Nowadays, Internet of Things (IoT) has gained considerable significance and concern, consequently, and in particular with widespread usage and adoption of the IoT applications and projects in various industries, the consideration of the IoT Security has increased dramatically too. Therefore, this paper presents a concise and a precise review for the current state of the IoT security models and frameworks. The paper also proposes a new unified criteria and characteristics, namely Formal, Inclusive, Future, Agile, and Compliant with the standards (FIFAC), in order to assure modularity, reliability, and trust for future IoT security models, as well as, to provide an assortment of adaptable controls for protecting the data consistently across all IoT layers.

As the scale of integrated circuits continues to expand, electronic design automation (EDA) and intellectual property (IP) reuse play an increasingly important role in the integrated circuit design process. Although many Web-EDA platforms have begun to provide online EDA software to reduce the threshold for the use of EDA tools, IP protection on the Web- EDA platform is an issue. This article uses blockchain technology to design an IP trading system for the Web-EDA platform to achieve mutual trust and transactions between IP owners and users. The structure of the IP trading system is described in detail, and a blockchain wallet for the Web-EDA platform is developed.

Recent advances in resistive synaptic devices have enabled the emergence of brain-inspired smart chips. These chips can execute complex cognitive tasks in digital signal processing precisely and efficiently using an efficient neuromorphic system. The neuromorphic synapses used in such chips, however, are different from the traditional integrated circuit architectures, thereby weakening their resistance to malicious transformation and intellectual property (IP) counterfeiting. Accordingly, in this paper, we propose an effective hybrid encryption methodology for IP core protection in neuromorphic computing systems, in-corporating elliptic curve cryptography and SM4 simultaneously. Experimental results confirm that the proposed method can implement real-time encryption of any number of crossbar arrays in neuromorphic systems accurately, while reducing the time overhead by 14.40%-26.08%.

This paper shows the benefits of synchrophasor technology for islanding detection and resynchronization in the control room at Empresa de Transmisión Eléctrica Dominicana (ETED) in the Dominican Republic. EPG's Real Time Dynamics Monitoring System (RTDMS®) deployed at ETED was tested during operator training with the event data after an islanding event occurred on October 26, 2019, which caused the ETED System to split into two islands. RTDMS's islanding detection algorithm quickly detected and identified the event. The islanding situation was not clear for operators during the time of the event with the use of traditional SCADA tools. The use of synchophasor technology also provides valuable information for a quick and safe resynchronization. By monitoring the system frequency in each island and voltage angle differences between islands, operators can know the exact time of circuit breaker closure for a successful resynchronization. Synchrophasors allow the resynchronization in a relatively short time, avoiding the risk of additional load loss, generator outages or even a wider system blackout.

To find software vulnerabilities using software vulnerability detection technology is an important way to ensure the system security. Existing software vulnerability detection methods have some limitations as they can only play a certain role in some specific situations. To accurately analyze and evaluate the existing vulnerability detection methods, an integrated testing and evaluation system (iTES) is designed and implemented in this paper. The main functions of the iTES are:(1) Vulnerability cases with source codes covering common vulnerability types are collected automatically to form a vulnerability cases library; (2) Fourteen methods including static and dynamic vulnerability detection are evaluated in iTES, involving the Windows and Linux platforms; (3) Furthermore, a set of evaluation metrics is designed, including accuracy, false positive rate, utilization efficiency, time cost and resource cost. The final evaluation and test results of iTES have a good guiding significance for the selection of appropriate software vulnerability detection methods or tools according to the actual situation in practice.

Advances in deep neural networks (DNNs) have shown tremendous promise in the medical domain. However, the deep learning tools that are helping the domain, can also be used against it. Given the prevalence of fraud in the healthcare domain, it is important to consider the adversarial use of DNNs in manipulating sensitive data that is crucial to patient healthcare. In this work, we present the design and implementation of a DNN-based image translation attack on biomedical imagery. More specifically, we propose Jekyll, a neural style transfer framework that takes as input a biomedical image of a patient and translates it to a new image that indicates an attacker-chosen disease condition. The potential for fraudulent claims based on such generated `fake' medical images is significant, and we demonstrate successful attacks on both X-rays and retinal fundus image modalities. We show that these attacks manage to mislead both medical professionals and algorithmic detection schemes. Lastly, we also investigate defensive measures based on machine learning to detect images generated by Jekyll.

Data sampling is critical process for energy constrained Wireless Sensor Networks. In this article, we proposed a Predictive Data Recovery Compressive Sensing (PDR-CS) procedure for data sampling. PDR-CS samples data measurements from the monitoring field on the basis of spatial and temporal correlation and sparse measurements recovered at the Sink. Our proposed algorithm, PDR-CS extends the iterative re-weighted -ℓ1(IRW - ℓ1) minimization and regularization on the top of Spatio-temporal compressibility for enhancing accuracy of signal recovery and reducing the energy consumption. The simulation study shows that from the less number of samples are enough to recover the signal. And also compared with the other compressive sensing procedures, PDR-CS works with less time.

In the context of a rapidly changing and increasingly complex (industrial) production landscape, securing the (communication) infrastructure is becoming an ever more important but also more challenging task - accompanied by the application of radio communication. A worthwhile and promising approach to overcome the arising attack vectors, and to keep private networks private, are Physical Layer Security (PhySec) implementations. The paper focuses on the transfer of the IEEE802.11 (WLAN) PhySec - Secret Key Generation (SKG) algorithms to Next Generation Mobile Networks (NGMNs), as they are the driving forces and key enabler of future industrial networks. Based on a real world Long Term Evolution (LTE) testbed, improvements of the SKG algorithms are validated. The paper presents and evaluates significant improvements in the establishment of channel profiles, whereby especially the Bit Disagreement Rate (BDR) can be improved substantially. The combination of the Discrete Cosine Transformation (DCT) and the supervised Machine Learning (ML) algorithm - Linear Regression (LR) - provides outstanding results, which can be used beyond the SKG application. The evaluation also emphasizes the appropriateness of PhySec for securing private networks.

Some of the key challenges in steganography are imperceptibility and resistance to detection of steganalysis algorithms. Zero steganography is an approach to data hiding such that the cover image is not modified. This paper focuses on the generation of stego-key, which is an essential component of this steganographic approach. This approach utilizes DNA sequences and shifting and flipping operations in its binary code representation. Experimental results show that the key generation algorithm has a low cracking probability. The algorithm satisfies the avalanche criterion.

Wireless security is confronted with the complexity of the secret key distribution process, which is difficult to implement on an Ad Hoc network without a key management infrastructure. The symmetric key extraction mechanism from a response channel in a wireless environment is a very promising alternative solution with the simplicity of the key distribution process. Various mechanisms have been proposed for extracting the symmetric key, but many mechanisms produce low rates of the symmetric key due to the high bit differences that occur. This led to the fact that the reconciliation phase was unable to make corrections, as a result of which many key bits were lost, and the time required to obtain a symmetric key was increased. In this paper, we propose the use of an interval approach that divides the response channel into segments at specific intervals to reduce the key bit difference and increase the key rates. The results of tests conducted in the wireless environment show that the use of these mechanisms can increase the rate of the keys up to 35% compared to existing mechanisms.

Side-channel analysis (SCA) is a big threat to the security of connected embedded devices. Over the last few years, physical non-invasive SCA attacks utilizing the electromagnetic (EM) radiation (EM side-channel `leakage') from a crypto IC has gained huge momentum owing to the availability of the low-cost EM probes and development of the deep-learning (DL) based profiling attacks. In this paper, our goal is to understand the source of the EM leakage by analyzing a white-box modeling of the EM leakage from the crypto IC, leading towards a low-overhead generic countermeasure. To kill this EM leakage from its source, the solution utilizes a signature attenuation hardware (SAH) encapsulating the crypto core locally within the lower metal layers such that the critical correlated crypto current signature is significantly attenuated before it passes through the higher metal layers to connect to the external pin. The protection circuit utilizing AES256 as the crypto core is fabricated in 65nm process and shows for the first time the effects of metal routing on the EM leakage. The \textbackslashtextgreater 350× signature attenuation of the SAH together with the local lower metal routing ensured that the protected AES remains secure even after 1B measurements for both EM and power SCA, which is an 100× improvement over the state-of-the-art with comparable overheads. Overall, with the combination of the 2 techniques - signature suppression and local lower metal routing, we are able to kill the EM side-channel leakage at its source such that the correlated signature is not passed through the top-level metals, MIM capacitors, or on-board inductors, which are the primary sources of EM leakage, thereby preventing EM SCA attacks.