Biblio
The majority of available wearable computing devices require communication with Internet servers for data analysis and storage, and rely on a paired smartphone to enable secure communication. However, many wearables are equipped with WiFi network interfaces, enabling direct communication with the Internet. Secure communication protocols could then run on these wearables themselves, yet it is not clear if they can be efficiently supported.,,,,In this paper, we show that wearables are ready for direct and secure Internet communication by means of experiments with both controlled local web servers and Internet servers. We observe that the overall energy consumption and communication delay can be reduced with direct Internet connection via WiFi from wearables compared to using smartphones as relays via Bluetooth. We also show that the additional HTTPS cost caused by TLS handshake and encryption is closely related to the number of parallel connections, and has the same relative impact on wearables and smartphones.
Physical unclonable functions (PUFs) are devices which are easily probed but difficult to predict. Optical PUFs have been discussed within the literature, with traditional optical PUFs typically using spatial light modulators, coherent illumination, and scattering volumes; however, these systems can be large, expensive, and difficult to maintain alignment in practical conditions. We propose and demonstrate a new kind of optical PUF based on computational imaging and compressive sensing to address these challenges with traditional optical PUFs. This work describes the design, simulation, and prototyping of this computational optical PUF (COPUF) that utilizes incoherent polychromatic illumination passing through an additively manufactured refracting optical polymer element. We demonstrate the ability to pass information through a COPUF using a variety of sampling methods, including the use of compressive sensing. The sensitivity of the COPUF system is also explored. We explore non-traditional PUF configurations enabled by the COPUF architecture. The double COPUF system, which employees two serially connected COPUFs, is proposed and analyzed as a means to authenticate and communicate between two entities that have previously agreed to communicate. This configuration enables estimation of a message inversion key without the calculation of individual COPUF inversion keys at any point in the PUF life cycle. Our results show that it is possible to construct inexpensive optical PUFs using computational imaging. This could lead to new uses of PUFs in places where electrical PUFs cannot be utilized effectively, as low cost tags and seals, and potentially as authenticating and communicating devices.
With the development of modern logistics industry railway freight enterprises as the main traditional logistics enterprises, the service mode is facing many problems. In the era of big data, for railway freight enterprises, coordinated development and sharing of information resources have become the requirements of the times, while how to protect the privacy of citizens has become one of the focus issues of the public. To prevent the disclosure or abuse of the citizens' privacy information, the citizens' privacy needs to be preserved in the process of information opening and sharing. However, most of the existing privacy preserving models cannot to be used to resist attacks with continuously growing background knowledge. This paper presents the method of applying differential privacy to protect associated data, which can be shared in railway freight service association information. First, the original service data need to slice by optimal shard length, then differential method and apriori algorithm is used to add Laplace noise in the Candidate sets. Thus the citizen's privacy information can be protected even if the attacker gets strong background knowledge. Last, sharing associated data to railway information resource partners. The steps and usefulness of the discussed privacy preservation method is illustrated by an example.
Botnets are a growing threat to the security of data and services on a global level. They exploit vulnerabilities in networks and host machines to harvest sensitive information, or make use of network resources such as memory or bandwidth in cyber-crime campaigns. Bot programs by nature are largely automated and systematic, and this is often used to detect them. In this paper, we extend upon existing work in this area by proposing a network event correlation method to produce graphs of flows generated by botnets, outlining the implementation and functionality of this approach. We also show how this method can be combined with statistical flow-based analysis to provide a descriptive chain of events, and test on public datasets with an overall success rate of 94.1%.
The online portion of modern life is growing at an astonishing rate, with the consequence that more of the user's critical information is stored online. This poses an immediate threat to privacy and security of the user's data. This work will cover the increasing dangers and security risks of adware, adware injection, and malware injection. These programs increase in direct proportion to the number of users on the Internet. Each of these programs presents an imminent threat to a user's privacy and sensitive information, anytime they utilize the Internet. We will discuss how current ad blockers are not the actual solution to these threats, but rather a premise to our work. Current ad blocking tools can be discovered by the web servers which often requires suppression of the ad blocking tool. Suppressing the tool creates vulnerabilities in a user's system, but even when the tool is active their system is still susceptible to peril. It is possible, even when an ad blocking tool is functioning, for it to allow adware content through. Our solution to the contemporary threats is our tool, MalFire.
Vulnerability analysis is important procedure for a cyber security evaluation process. There are two types of vulnerability analysis, which is an interview for the facility manager and a vulnerability scanning with a software tool. It is difficult to use the vulnerability scanning tool on an operating nuclear plant control system because of the possibility of giving adverse effects to the system. The purpose of this paper is to suggest a method of cyber security vulnerability test using the DPPS and PMAS test-bed. Based on functions of the test-bed, possible threats and vulnerabilities in terms of cyber security were analyzed. Attack trees and test scenarios could be established with the consideration of attack vectors. It is expected that this method can be helpful to implement adequate security controls and verify whether the security controls make adverse impact to the inherent functions of the systems.
This paper investigates closed-form expressions to evaluate the performance of the Compressive Sensing (CS) based Energy Detector (ED). The conventional way to approximate the probability density function of the ED test statistic invokes the central limit theorem and considers the decision variable as Gaussian. This approach, however, provides good approximation only if the number of samples is large enough. This is not usually the case in CS framework, where the goal is to keep the sample size low. Moreover, working with a reduced number of measurements is of practical interest for general spectrum sensing in cognitive radio applications, where the sensing time should be sufficiently short since any time spent for sensing cannot be used for data transmission on the detected idle channels. In this paper, we make use of low-complexity approximations based on algebraic transformations of the one-dimensional Gaussian Q-function. More precisely, this paper provides new closed-form expressions for accurate evaluation of the CS-based ED performance as a function of the compressive ratio and the Signal-to-Noise Ratio (SNR). Simulation results demonstrate the increased accuracy of the proposed equations compared to existing works.
It is a challenging problem to preserve the friendly-correlations between individuals when publishing social-network data. To alleviate this problem, uncertain graph has been presented recently. The main idea of uncertain graph is converting an original graph into an uncertain form, where the correlations between individuals is an associated probability. However, the existing methods of uncertain graph lack rigorous guarantees of privacy and rely on the assumption of adversary's knowledge. In this paper we first introduced a general model for constructing uncertain graphs. Then, we proposed an algorithm under the model which is based on differential privacy and made an analysis of algorithm's privacy. Our algorithm provides rigorous guarantees of privacy and against the background knowledge attack. Finally, the algorithm we proposed satisfied differential privacy and showed feasibility in the experiments. And then, we compare our algorithm with (k, ε)-obfuscation algorithm in terms of data utility, the importance of nodes for network in our algorithm is similar to (k, ε)-obfuscation algorithm.
Cooperative spectrum sensing is often necessary in cognitive radios systems to localize a transmitter by fusing the measurements from multiple sensing radios. However, revealing spectrum sensing information also generally leaks information about the location of the radio that made those measurements. We propose a protocol for performing cooperative spectrum sensing while preserving the privacy of the sensing radios. In this protocol, radios fuse sensing information through a distributed particle filter based on a tree structure. All sensing information is encrypted using public-key cryptography, and one of the radios serves as an anonymizer, whose role is to break the connection between the sensing radios and the public keys they use. We consider a semi-honest (honest-but-curious) adversary model in which there is at most a single adversary that is internal to the sensing network and complies with the specified protocol but wishes to determine information about the other participants. Under this scenario, an adversary may learn the sensing information of some of the radios, but it does not have any way to tie that information to a particular radio's identity. We test the performance of our proposed distributed, tree-based particle filter using physical measurements of FM broadcast stations.
As an extension of cloud computing, fog computing is proving itself more and more potentially useful nowadays. Fog computing is introduced to overcome the shortcomings of cloud computing paradigm in handling the massive amount of traffic caused by the enormous number of Internet of Things devices being increasingly connected to the Internet on daily basis. Despite its advantages, fog architecture introduces new security and privacy threats that need to be studied and solved as soon as possible. In this work, we explore two privacy issues posed by the fog computing architecture and we define privacy challenges according to them. The first challenge is related to the fog's design purposes of reducing the latency and improving the bandwidth, where the existing privacy-preserving methods violate these design purposed. The other challenge is related to the proximity of fog nodes to the end-users or IoT devices. We discuss the importance of addressing these challenges by putting them in the context of real-life scenarios. Finally, we propose a privacy-preserving fog computing paradigm that solves these challenges and we assess the security and efficiency of our solution.
Trying to solve the risk of data privacy disclosure in classification process, a Random Forest algorithm under differential privacy named DPRF-gini is proposed in the paper. In the process of building decision tree, the algorithm first disturbed the process of feature selection and attribute partition by using exponential mechanism, and then meet the requirement of differential privacy by adding Laplace noise to the leaf node. Compared with the original algorithm, Empirical results show that protection of data privacy is further enhanced while the accuracy of the algorithm is slightly reduced.
Security Evaluation and Management (SEM) is considerably important process to protect the Embedded System (ES) from various kinds of security's exploits. In general, SEM's processes have some challenges, which limited its efficiency. Some of these challenges are system-based challenges like the hetero-geneity among system's components and system's size. Some other challenges are expert-based challenges like mis-evaluation possibility and experts non-continuous availability. Many of these challenges were addressed by the Multi Metric (MM) framework, which depends on experts' or subjective evaluation for basic evaluations. Despite of its productivity, subjective evaluation has some drawbacks (e.g. expert misevaluation) foster the need for considering objective evaluations in the MM framework. In addition, the MM framework is system centric framework, thus, by modelling complex and huge system using the MM framework a guide is needed indicating changes toward desirable security's requirements. This paper proposes extensions for the MM framework consider the usage of objective evaluations and work as guide for needed changes to satisfy desirable security requirements.
Emerging cyber-physical systems (CPS) often require collecting end users' data to support data-informed decision making processes. There has been a long-standing argument as to the tradeoff between privacy and data utility. In this paper, we adopt a multiparametric programming approach to rigorously study conditions under which data utility has to be sacrificed to protect privacy and situations where free-lunch privacy can be achieved, i.e., data can be concealed without hurting the optimality of the decision making underlying the CPS. We formalize the concept of free-lunch privacy, and establish various results on its existence, geometry, as well as efficient computation methods. We propose the free-lunch privacy mechanism, which is a pragmatic mechanism that exploits free-lunch privacy if it exists with the constant guarantee of optimal usage of data. We study the resilience of this mechanism against attacks that attempt to infer the parameter of a user's data generating process. We close the paper by a case study on occupancy-adaptive smart home temperature control to demonstrate the efficacy of the mechanism.
Despite widespread use of commercial anti-virus products, the number of malicious files detected on home and corporate computers continues to increase at a significant rate. Recently, anti-virus companies have started investing in machine learning solutions to augment signatures manually designed by analysts. A malicious file's determination is often represented as a hierarchical structure consisting of a type (e.g. Worm, Backdoor), a platform (e.g. Win32, Win64), a family (e.g. Rbot, Rugrat) and a family variant (e.g. A, B). While there has been substantial research in automated malware classification, the aforementioned hierarchical structure, which can provide additional information to the classification models, has been ignored. In this paper, we propose the novel idea and study the performance of employing hierarchical learning algorithms for automated classification of malicious files. To the best of our knowledge, this is the first research effort which incorporates the hierarchical structure of the malware label in its automated classification and in the security domain, in general. It is important to note that our method does not require any additional effort by analysts because they typically assign these hierarchical labels today. Our empirical results on a real world, industrial-scale malware dataset of 3.6 million files demonstrate that incorporation of the label hierarchy achieves a significant reduction of 33.1% in the binary error rate as compared to a non-hierarchical classifier which is traditionally used in such problems.
Security issues in vehicular communication have become a huge concern to safeguard increasing applications. A group signature is one of the popular authentication approaches for VANETs (Vehicular ad hoc networks) which can be implemented to secure the vehicular communication. However, securely distributing group keys to fast-moving vehicular nodes is still a challenging problem. In this paper, we propose an efficient key management protocol for group signature based authentication, where a group is extended to a domain with multiple road side units. Our scheme not only provides a secure way to deliver group keys to vehicular nodes, but also ensures security features. The experiment results show that our key distribution scheme is a scalable, efficient and secure solution to vehicular networking.
Nowadays, Malware has become a serious threat to the digitization of the world due to the emergence of various new and complex malware every day. Due to this, the traditional signature-based methods for detection of malware effectively becomes an obsolete method. The efficiency of the machine learning model in context to the detection of malware files has been proved by different researches and studies. In this paper, a framework has been developed to detect and classify different files (e.g exe, pdf, php, etc.) as benign and malicious using two level classifier namely, Macro (for detection of malware) and Micro (for classification of malware files as a Trojan, Spyware, Adware, etc.). Cuckoo Sandbox is used for generating static and dynamic analysis report by executing files in the virtual environment. In addition, a novel model is developed for extracting features based on static, behavioral and network analysis using analysis report generated by the Cuckoo Sandbox. Weka Framework is used to develop machine learning models by using training datasets. The experimental results using proposed framework shows high detection rate with an accuracy of 100% using J48 Decision tree model, 99% using SMO (Sequential Minimal Optimization) and 97% using Random Forest tree. It also shows effective classification rate with accuracy 100% using J48 Decision tree, 91% using SMO and 66% using Random Forest tree. These results are used for detecting and classifying unknown files as benign or malicious.
This paper investigates the suitability of employing various measurable features derived from multiple wearable devices (Apple Watch), for the generation of unique authentication and encryption keys related to the user. This technique is termed as ICMetrics. The ICMetrics technology requires identifying the suitable features in an environment for key generation most useful for online services. This paper presents an evaluation of the feasibility of identifying a unique user based on desirable feature set and activity data collected over short and long term and explores how the number of samples being factored into the ICMetrics system affects uniqueness of the key.
Traffic classification, i.e. associating network traffic to the application that generated it, is an important tool for several tasks, spanning on different fields (security, management, traffic engineering, R&D). This process is challenged by applications that preserve Internet users' privacy by encrypting the communication content, and even more by anonymity tools, additionally hiding the source, the destination, and the nature of the communication. In this paper, leveraging a public dataset released in 2017, we provide (repeatable) classification results with the aim of investigating to what degree the specific anonymity tool (and the traffic it hides) can be identified, when compared to the traffic of the other considered anonymity tools, using machine learning approaches based on the sole statistical features. To this end, four classifiers are trained and tested on the dataset: (i) Naïve Bayes, (ii) Bayesian Network, (iii) C4.5, and (iv) Random Forest. Results show that the three considered anonymity networks (Tor, I2P, JonDonym) can be easily distinguished (with an accuracy of 99.99%), telling even the specific application generating the traffic (with an accuracy of 98.00%).
As the malware threat landscape is constantly evolving and over one million new malware strains are being generated every day [1], early automatic detection of threats constitutes a top priority of cybersecurity research, and amplifies the need for more advanced detection and classification methods that are effective and efficient. In this paper, we present the application of machine learning algorithms to predict the length of time malware should be executed in a sandbox to reveal its malicious intent. We also introduce a novel hybrid approach to malware classification based on static binary analysis and dynamic analysis of malware. Static analysis extracts information from a binary file without executing it, and dynamic analysis captures the behavior of malware in a sandbox environment. Our experimental results show that by turning the aforementioned problems into machine learning problems, it is possible to get an accuracy of up to 90% on the prediction of the malware analysis run time and up to 92% on the classification of malware families.