Biblio

Linux is one of the operating systems to support the increasingly rapid development of internet technology. Apart from the speed of the process, security also needs to be considered. Center for Internet Security (CIS) Benchmark is an example of a security standard. This study implements the CIS Benchmark using the Chef Inspec application. This research focuses on building a tool to perform security audits on the Ubuntu 20.04 operating system. 232 controls on CIS Benchmark were successfully implemented using Chef Inspec application. The results of this study were 87 controls succeeded, 118 controls failed, and 27 controls were skipped. This research is expected to be a reference for information system managers in managing system security.

Security has become an important issue in an IT system of an organization. Each IT component has to be configured correctly, otherwise the risk of attack could increase. An important component is networking device such as router and switch. To avoid this misconfiguration, a well-known process called audit is used. There are several auditing tools both commercial and open-source. However, none of the existing tools that are open-source can automatically audit the security settings of networking device based on standard e.g., CIS benchmark. We, thus propose a tool that can verify the networking device automatically based on best practices so that auditors can conveniently check as well as issue a report.

In recent years, more and more medical institutions have been using electronic medical records (EMRs) to improve service efficiency and reduce storage cost. However, it is difficult for medical institutions with different management methods to share medical data. The medical data of patients is easy to be abused, and there are security risks of privacy data leakage. The above problems seriously impede the sharing of medical data. To solve these problems, we propose a blockchain-based medical data sharing scheme with attribute-based searchable encryption, named BMDS. In BMDS, encrypted EMRs are securely stored in the interplanetary file system (IPFS), while corresponding indexes and other information are stored in a medical consortium blockchain. The proposed BMDS has the features of tamper-proof, privacy preservation, verifiability and secure key management, and there is no single point of failure. The performance evaluation of computational overhead and security analysis show that the proposed BMDS has more comprehensive security features and practicability.

Over the last few years, the world has been moving towards digital healthcare, where harnessing medical data distributed across multiple healthcare providers is essential to achieving personalized treatments. Though the efficiency and speed of the diagnosis process have increased due to the digitalization of healthcare data, it is at constant risk of cyberattacks. Medical images, in particular, seem to have become a regular victim of hackers, due to which there is a need to find a feasible solution for storing them securely. This work proposes a blockchain-based framework that leverages the InterPlanetary File system (IPFS) to provide decentralized storage for medical images. Our proposed blockchain storage model is implemented in the IPFS distributed file-sharing system, where each image is stored on IPFS, and its corresponding unique content-addressed hash is stored in the blockchain. The proposed model ensures the security of the medical images without any third-party dependency and eliminates the obstacles that arise due to centralized storage.

Steganography is the method of hiding one type of information into other type of information, hiding a secret a message in a cover so that others can't know the presence of the secret information. It provides an extra layer of security in communication and information sharing. Security is an important aspect of the communication process; everyone want security in communication. The main purpose of this paper is to introduce security of information that people share among them. In this paper we are presenting different methods of substitution techniques of image steganography and their comparison. Least significant bit and most significant bit substitution techniques are used. Information is hidden in an image file and then decoded back for the secret message. Hiding the presence of any hidden information makes this more secure. This implementation can be used by secret service agencies and also common people for secure communication.

Nowadays cloud computing has become the crucial part of IT and most important thing is information security in cloud environment. Range of users can access the facilities and use cloud according to their feasibility. Cloud computing is utilized as safe storage of information but still data security is the biggest concern, for example, secrecy, data accessibility, data integrity is considerable factor for cloud storage. Cloud service providers provide the facility to clients that they can store the data on cloud remotely and access whenever required. Due to this facility, it gets necessary to shield or cover information from unapproved access, hackers or any sort of alteration and malevolent conduct. It is inexpensive approach to store the valuable information and doesn't require any hardware and software to hold the data. it gives excellent work experience but main measure is just security. In this work security strategies have been proposed for cloud data protection, capable to overpower the shortcomings of conventional data protection algorithms and enhancing security using steganography algorithm, encryption decryption techniques, compression and file splitting technique. These techniques are utilized for effective results in data protection, Client can easily access our developed desktop application and share the information in an effective and secured way.

Cyberattacks have been the major concern with the growing advancement in technology. Complex security models have been developed to combat these attacks, yet none exhibit a full-proof performance. Recently, several machine learning (ML) methods have gained significant popularity in offering effective and efficient intrusion detection schemes which assist in proactive detection of multiple network intrusions, such as Denial of Service (DoS), Probe, Remote to User (R2L), User to Root attack (U2R). Multiple research works have been surveyed based on adopted ML methods (either signature-based or anomaly detection) and some of the useful observations, performance analysis and comparative study are highlighted in this paper. Among the different ML algorithms in survey, PSO-SVM algorithm has shown maximum accuracy. Using RBF-based classifier and C-means clustering algorithm, a new model i.e., combination of serial and parallel IDS is proposed in this paper. The detection rate to detect known and unknown intrusion is 99.5% and false positive rate is 1.3%. In PIDS (known intrusion classifier), the detection rate for DOS, probe, U2R and R2L is 99.7%, 98.8%, 99.4% and 98.5% and the False positive rate is 0.6%, 0.2%, 3% and 2.8% respectively. In SIDS (unknown intrusion classifier), the rate of intrusion detection is 99.1% and false positive rate is 1.62%. This proposed model has known intrusion detection accuracy similar to PSO - SVM and is better than all other models. Finally the future research directions relevant to this domain and contributions have been discussed.

With the continuous emergence of cyber attacks, the security of industrial control system (ICS) has become a hot issue in academia and industry. Intrusion detection technology plays an irreplaceable role in protecting industrial system from attacks. However, the imbalance between normal samples and attack samples seriously affects the performance of intrusion detection algorithms. This paper proposes SE-IDS, which uses generative adversarial networks (GAN) to expand the minority to make the number of normal samples and attack samples relatively balanced, adopts particle swarm optimization (PSO) to optimize the parameters of LightGBM. Finally, we evaluated the performance of the proposed model on the industrial network dataset.

The power grid is considered to be the most critical piece of infrastructure in the United States because each of the other fifteen critical infrastructures, as defined by the Cyberse-curity and Infrastructure Security Agency (CISA), require the energy sector to properly function. Due the critical nature of the power grid, the ability to detect anomalies in the power grid is of critical importance to prevent power outages, avoid damage to sensitive equipment and to maintain a working power grid. Over the past few decades, the modern power grid has evolved into a large Cyber Physical System (CPS) equipped with wide area monitoring systems (WAMS) and distributed control. As smart technology advances, the power grid continues to be upgraded with high fidelity sensors and measurement devices, such as phasor measurement units (PMUs), that can report the state of the system with a high temporal resolution. However, this influx of data can often become overwhelming to the legacy Supervisory Control and Data Acquisition (SCADA) system, as well as, the power system operator. In this paper, we propose using a deep learning (DL) convolutional neural network (CNN) as a module within the Automatic Network Guardian for ELectrical systems (ANGEL) Digital Twin environment to detect physical faults in a power system. The presented approach uses high fidelity measurement data from the IEEE 9-bus and IEEE 39-bus benchmark power systems to not only detect if there is a fault in the power system but also applies the algorithm to classify which bus contains the fault.

Smart grid monitoring, automation and control will completely rely on PMU based sensor data soon. Accordingly, a high throughput, low latency Information and Communication Technology (ICT) infrastructure should be opted in this regard. Due to the low cost, low power profile, dynamic nature, improved accuracy and scalability, wireless sensor networks (WSNs) can be a good choice. Yet, the efficiency of a WSN depends a lot on the network design and the routing technique. In this paper a new design of the ICT network for smart grid using WSN is proposed. In order to understand the interactions between different entities, detect their operational levels, design the routing scheme and identify false data injection by particular ICT entities, a new model of interdependency called the Multi State Implicative Interdependency Model (MSIIM) is proposed in this paper, which is an updated version of the Modified Implicative Interdependency Model (MIIM) [1]. MSIIM considers the data dependency and operational accuracy of entities together with structural and functional dependencies between them. A multi-path secure routing technique is also proposed in this paper which relies on the MSIIM model for its functioning. Simulation results prove that MSIIM based False Data Injection (FDI) detection and mitigation works better and faster than existing methods.

The expression of cyber-attacks on communication links in smart grids has emerged recently. In microgrids, cooperation between agents through communication links is required, thus, microgrids can be considered as cyber-physical-systems and they are vulnerable to cyber-attack threats. Cyber-attacks can cause damages in control systems, therefore, the resilient control methods are necessary. In this paper, a resilient control approach against false data injection attack is proposed for secondary control of DC microgrids. In the proposed framework, a PI controller with an adjustable gain is utilized to eliminate the injected false data. The proposed control method is employed for both sensor and link attacks. Convergence analysis of the measurement sensors and the secondary control objectives under the studied control method is performed. Finally, a DC microgrid with four units is built in Matlab/Simulink environment to verify the proposed approach.

With the advancement in the growth of Internet-of-Things (IoT), its number of applications has also increased such as in healthcare, smart cities, vehicles, industries, household appliances, and Smart Grids (SG). One of the major applications of IoT is the SG and smart meter which consists of a large number of internet-connected sensors and can communicate bi-directionally in real-time. The SG network involves smart meters, data collectors, generators, and sensors connected with the internet. SG networks involve the generation, distribution, transmission, and consumption of electrical power supplies. It consists of Household Area Network (HAN), and Neighborhood Area Network (NAN) for communication. Smart meters can communicate bidirectionally with consumers and provide real-time information to utility offices. But this communication channel is a wide-open network for data transmission. Therefore, it makes the SG network and smart meter vulnerable to outside hacker and various Cyber-Physical System (CPS) attacks such as False Data Injection (FDI), inserting malicious data, erroneous data, manipulating the sensor reading values. Here cryptography techniques can play a major role along with the private blockchain model for secure data transmission in smart meters. Hence, to overcome these existing issues and challenges in smart meter communication we have proposed a blockchain-based system model for secure communication along with a novel Advanced Elliptic Curve Cryptography Digital Signature (AECCDS) algorithm in Fog Computing (FC) environment. Here FC nodes will work as miners at the edge of smart meters for secure and real-time communication. The algorithm is implemented using iFogSim, Geth version 1.9.25, Ganache, Truffle for compiling smart contracts, Anaconda (Python editor), and ATOM as language editor for the smart contracts.

In present scenario features like low-cost, power-efficientand easy-to-implement Wireless Sensor Networks (WSN’s) has become one of growing prospects.though, its security issues have become a popular topic of research nowadays. Specific attacks often experience the security issues as they easily combined with other attacks to destroy the network. In this paper, we discuss about detecting the particular attacks like Sybil, Black-holeand Denial of Service (DoS) attacks on WSNs. These networks are more vulnerable to them. We attempt to investigate the security measures and the applicability of the AODV protocol to detect and manage specific types of network attacks in VANET.The RSA algorithm is proposed here, as it is capable of detecting sensor nodes ormessages transmitted from sensor nodes to the base station and prevents network from being attacked by the source node. It also improves the security mechanism of the AODV protocol. This simulation set up is performed using MATLAB simulation tool

Underwater networks have the potential to enable unexplored applications and to enhance our ability to observe and predict the ocean. Underwater acoustic sensor networks (UASNs) are often deployed in unprecedented and hostile waters and face many security threats. Applications based on UASNs such as coastal defense, pollution monitoring, assisted navigation to name a few, require secure communication. A new set of communication protocols and cooperative coordination algorithms have been proposed to enable collaborative monitoring tasks. However, such protocols overlook security as a key performance indicator. Spoofing, altering, or replaying routing information can affect the entire network, making UASN vulnerable to routing attacks such as selective forwarding, sinkhole attack, Sybil attack, acknowledgement spoofing and HELLO flood attack. The lack of security against such threats is startling if maintained that security is indeed an important requirement in many emerging civilian and military applications. In this work, we look at one of the most prevalent attacks among UASNs which is Sybill attack and discuss mitigation approaches for it. Then, feasibly implemented the attack in UnetStack3 to simulate real-life scenario.

Security is the main concern for wireless sensor nodes and exposed against malicious attacks. To secure the communication between sensor nodes several key managing arrangements are already implemented. The key managing method for any protected application must minimally deliver safety facilities such as truthfulness. Diffie–Hellman key exchange in the absence of authentication is exposed to MITM (man-in-the-middle) attacks due to which the attacker node can easily interrupt the communication, by appearing as a valid node in the network. In wireless sensor networks, single path routing is very common but it suffers with the two problems i:e link failure which results in data loss and if any node in single path is compromised, there is no alternative to send the data to the destination securely. To overcome this problem, multipath routing protocol is used which provides both availability and consistency of data. AOMDV (Ad-hoc On-demand Multipath Distance Vector Routing Protocol) is used in a proposed algorithm which provides alternative paths to reach the data packets to the destination. This paper presents an algorithm DH-SAM (Diffie-Hellman- Sybil Attack Mitigation) to spot and mitigate Sybil nodes and make the network trusted with the objective of solving the issue of MITM attack in the network. After node authentication, secure keys are established between two communicating nodes for data transmission using the Diffie-Hellman algorithm. Performance evaluation of DH-SAM is done by using different metrics such as detection rate, PDR, throughput, and average end to end (AE2E) delay.

The integration of IDS and Internet of Things (IoT) with deep learning plays a significant role in safety. Security has a strong role to play. Application of the IoT network decreases the time complexity and resources. In the traditional intrusion detection systems (IDS), this research work implements the cutting-edge methodologies in the IoT environment. This research is based on analysis, conception, testing and execution. Detection of intrusions can be performed by using the advanced deep learning system and multiagent. The NSL-KDD dataset is used to test the IoT system. The IoT system is used to test the IoT system. In order to detect attacks from intruders of transport layer, efficiency result rely on advanced deep learning idea. In order to increase the system performance, multi -agent algorithms could be employed to train communications agencies and to optimize the feedback training process. Advanced deep learning techniques such as CNN will be researched to boost system performance. The testing part an IoT includes data simulator which will be used to generate in continuous of research work finding with deep learning algorithms of suitable IDS in IoT network environment of current scenario without time complexity.

This paper outlines an approach to build an Intrusion detection system for a network interface device. This research work has developed a hybrid intrusion detection system which involves various machine learning techniques along with inference detection for a comparative analysis. It is explained in 2 phases: Training (Model Training and Inference Network Building) and Detection phase (Working phase). This aims to solve all the current real-life problem that exists in machine learning algorithms as machine learning techniques are stiff they have their respective classification region outside which they cease to work properly. This paper aims to provide the best working machine learning technique out of the many used. The machine learning techniques used in comparative analysis are Decision Tree, Naïve Bayes, K-Nearest Neighbors (KNN) and Support Vector Machines (SVM) along with NSLKDD dataset for testing and training of our Network Intrusion Detection Model. The accuracy recorded for Decision Tree, Naïve Bayes, K-Nearest Neighbors (KNN) and Support Vector Machines(SVM) respectively when tested independently are 98.088%, 82.971%, 95.75%, 81.971% and when tested with inference detection model are 98.554%, 66.687%, 97.605%, 93.914%. Therefore, it can be concluded that our inference detection model helps in improving certain factors which are not detected using conventional machine learning techniques.

Even if there is a rapid proliferation with the advantages of low cost, the emerging on-demand cloud services have led to an increase in cybercrime activities. Cyber criminals are utilizing cloud services through its distributed nature of infrastructure and create a lot of challenges to detect and investigate the incidents by the security personnel. The tracing of command flow forms a clue for the detection of malicious activity occurring in the system through System Calls Analysis (SCA). As machine learning based approaches are known to automate the work in detecting malwares, simple Support Vector Machine (SVM) based approaches are often reporting low value of accuracy. In this work, a malware classification system proposed with the supervised machine learning of unknown malware instances through Support Vector Machine - Stochastic Gradient Descent (SVM-SGD) algorithm. The performance of the system evaluated on CIC-IDS2017 dataset with labelled attacks. The system is compared with traditional signature based detection model and observed to report less number of false alerts with improved accuracy. The signature based detection gets an accuracy of 86.12%, while the SVM-SGD gets the best accuracy of 99.13%. The model is found to be lightweight but efficient in detecting malware with high degree of accuracy.

With the development of technology, the structure of power grid becomes more and more complex, and the amount of data collected is also increasing. In the existing smart power grid, the data collected by sensors need to be uploaded and stored to the trusted central node, but the centralized storage method is easy to cause the malicious attack of the central node, resulting in single point failure, data tampering and other security problems. In order to solve these information security problems, this paper proposes a new data security storage framework based on private blockchain. By using the improved raft algorithm, partial decentralized data storage is used instead of traditional centralized storage. It also introduces in detail the working mechanism of the smart grid data security storage framework, including the process of uploading collected data, data verification, and data block consensus. The security analysis shows the effectiveness of the proposed data storage framework.

Smart Grid is used to improve the accuracy of the grid network query. Though it gives the accuracy, it has the data privacy issues. It is a big challenge to solve the privacy issue in the smart grid. We need secured algorithms to protect the data in the smart grid, since the data is very important. This paper explains about the k-anonymous algorithm and analyzes the enhanced L-diversity algorithm for data privacy and security. The algorithm can protect the data in the smart grid is proven by the experiments.

The widespread utilization of smart grids is due to their flexibility to support the two-way flow of electricity and data. The critical nature of smart grids evokes traditional network attacks. Due to the advantages of blockchains in terms of ensuring trustworthiness and security, a significant body of literature has been recently developed to secure smart grid operations. We categorize the blockchain applications in smart grid into three categories: energy trading, infrastructure management, and smart-grid operations management. This paper provides an extensive survey of these works and the different ways to utilize blockchains in smart grid in general. We propose an abstract system to overcome a critical cyberattack; namely, the fake data injection, as previous works did not consider such an attack.

Due to the critical importance of Industrial Control Systems (ICS) to the operations of cities and countries, research into the security of critical infrastructure has become increasingly relevant and necessary. As a component of both the research and application sides of smart city development, accurate and precise modeling, simulation, and verification are key parts of a robust design and development tools that provide critical assistance in the prevention, detection, and recovery from abnormal behavior in the sensors, controllers, and actuators which make up a modern ICS system. However, while these tools have potential, there is currently a need for helper-tools to assist with their setup and configuration, if they are to be utilized widely. Existing state-of-the-art tools are often technically complex and difficult to customize for any given IoT/ICS processes. This is a serious barrier to entry for most technicians, engineers, researchers, and smart city planners, while slowing down the critical aspects of safety and security verification. To remedy this issue, we take a case study of existing simulation toolkits within the field of water management and expand on existing tools and algorithms with simplistic automated retrieval functionality using a much more in-depth and usable customization interface to accelerate simulation scenario design and implementation, allowing for customization of the cyber-physical network infrastructure and cyber attack scenarios. We additionally provide a novel in-tool-assessment of network’s resilience according to graph theory path diversity. Further, we lay out a roadmap for future development and application of the proposed tool, including expansions on resiliency and potential vulnerability model checking, and discuss applications of our work to other fields relevant to the design and operation of smart cities.

Modern embedded IoT devices are an attractive target for cyber attacks. For example, they can be used to disable entire factories and ask for ransom. Recovery of compromised devices is not an easy task, because malware can subvert the original software and make itself persistent. In addition, many embedded devices do not implement remote recovery procedures and, therefore, require manual intervention.Recent proposals from NIST and TCG define concepts and building blocks for cyber resilience: protection, detection and recovery. In this paper, we describe a system which allows implementing cyber resilient IoT devices that can be recovered remotely and timely. The proposed architecture consists of trusted data monitoring, local and remote attack detection, and enforced connections to remote services as building blocks for attack detection and recovery. Further, hardware- and software-based implementations of such a system are presented.

Point-of-care diagnostics are a key technology for various safety-critical applications from providing diagnostics in developing countries lacking adequate medical infrastructure to fight infectious diseases to screening procedures for border protection. Digital microfluidics biochips are an emerging technology that are increasingly being evaluated as a viable platform for rapid diagnosis and point-of-care field deployment. In such a technology, processing errors are inherent. Cyber-physical digital biochips offer higher reliability through the inclusion of automated error recovery mechanisms that can reconfigure operations performed on the electrode array. Recent research has begun to explore security vulnerabilities of digital microfluidic systems. This paper expands previous work that exploits vulnerabilities due to implicit trust in the error recovery mechanism. In this work, a discriminative data mining approach is introduced to identify frequent bioassay operations that can be cyber-physically attested for runtime security protection.

In order to realize Intelligent Disaster Recovery and break the traditional reactive backup mode, it is necessary to forecast the potential system anomalies, and proactively backup the real-time datas and configurations. System logs record the running status as well as the critical events (including errors and warnings), which can help to detect system performance, debug system faults and analyze the causes of anomalies. What's more, with the features of real-time, hierarchies and easy-access, log data can be an ideal source for monitoring system status. To reduce the complexity and improve the robustness and practicability of existing log-based anomaly detection methods, we propose a new anomaly detection mechanism based on hierarchical weights, which can deal with unstable log data. We firstly extract semantic information of log strings, and get the word-level weights by SIF algorithm to embed log strings into vectors, which are then feed into attention-based Long Short-Term Memory(LSTM) deep learning network model. In addition to get sentence-level weight which can be used to explore the interdependence between different log sequences and improve the accuracy, we utilize attention weights to help with building workflow to diagnose the abnormal points in the execution of a specific task. Our experimental results show that the hierarchical weights mechanism can effectively improve accuracy of perdition task and reduce complexity of the model, which provides the feasibility foundation support for Intelligent Disaster Recovery.