Biblio

This paper considers methods of fingerprint protection in biometric authentication systems. Including methods of protecting fingerprint templates using zero digital watermarks and cryptography techniques. The paper considers a secure authentication model using cryptography and digital watermarks.

Nowadays, face recognition is used everywhere in all fields. Though the face recognition is used for security purposes there is also chance in hacking the faces which is used for face recognition. For enhancing the face security, encryption and decryption technique is used. Face cognizance has been engaged in more than a few security-connected purposes such as supervision, e-passport, and etc… The significant use of biometric raises vital private concerns, in precise if the biometric same method is carried out at a central or unfrosted servers, and calls for implementation of Privacy improving technologies. For privacy concerns the encoding and decoding is used. For achieving the result we are using the Open Computer Vision (OpenCV) tool. With the help of this tool we are going to cipher the face and decode the face with advanced encryption standards techniques. OpenCV is the tool used in this project

Researchers have been investigating automated solutions for fact-checking in various fronts. However, current approaches often overlook the fact that information released every day is escalating, and a large amount of them overlap. Intending to accelerate fact-checking, we bridge this gap by proposing a new pipeline – grouping similar messages and summarizing them into aggregated claims. Specifically, we first clean a set of social media posts (e.g., tweets) and build a graph of all posts based on their semantics; Then, we perform two clustering methods to group the messages for further claim summarization. We evaluate the summaries both quantitatively with ROUGE scores and qualitatively with human evaluation. We also generate a graph of summaries to verify that there is no significant overlap among them. The results reduced 28,818 original messages to 700 summary claims, showing the potential to speed up the fact-checking process by organizing and selecting representative claims from massive disorganized and redundant messages.

The COVID-19 pandemic introduced novel incentives for adversaries to exploit the state of turmoil. As we have witnessed with the increase in for instance phishing attacks and domain name registrations piggybacking the COVID-19 brand name. In this paper, we perform an analysis at Internet-scale of COVID-19 domain name registrations during the early stages of the virus' spread, and investigate the rationales behind them. We leverage the DomainTools COVID-19 Threat List and additional measurements to analyze over 150,000 domains registered between January 1st 2020 and May 1st 2020. We identify two key rationales for covid-related domain registrations. Online marketing, by either redirecting traffic or hosting a commercial service on the domain, and domain parking, by registering domains containing popular COVID-19 keywords, presumably anticipating a profit when reselling the domain later on. We also highlight three public policy take-aways that can counteract this domain registration behavior.

The transportation system is becoming tremendously important in today's human activities and the number of urban vehicles grows rapidly. The vehicle theft also has become a shared concern for all vehicle owners. However, the present anti-theft system which maybe high reliable, lack of proper mechanism for preventing theft before it happens. This work proposes the internet of things based smart vehicle security staring system; efficient security provided to the vehicle owners relies on securing car ignition system by using a developed android application running on smart phone connected to the designed system installed in vehicle. With this system it is non- viable to access the vehicle's functional system in case the ignition key has been stolen or lost. It gives the drivers the ability to stay connected with their vehicle. Whenever the ignition key is stolen or lost, it is impossible to start the vehicle as the ignition system is still locked on the vehicle start and only the authorized person will be able to start the vehicle at convenient time with the combination of ignition key and smart phone application. This study proposes to design the system that uses node MCU, Bluetooth low energy (BLE), transistors, power relays and android smartphone in system testing. In addition, it is cost effective and once installed in the vehicle there is no more cost of maintenance.

Security patterns are proven solutions to recurring problems in software development. The growing importance of secure software development has introduced diverse research efforts on security patterns that mostly focused on classification schemes, evolution and evaluation of the patterns. Despite a huge mature history of research and popularity among researchers, security patterns have not fully penetrated software development practices. Besides, software security education has not been benefited by these patterns though a commonly stated motivation is the dissemination of expert knowledge and experience. This is because the patterns lack a simple embodiment to help students learn about vulnerable code, and to guide new developers on secure coding. In order to address this problem, we propose to conduct intelligent data mining in the context of software engineering to discover learner-friendly software security patterns. Our proposed model entails knowledge discovery from large scale published real-world vulnerability histories in software applications. We harness association rule mining for frequent pattern discovery to mine easily comprehensible and explainable learner-friendly rules, mainly of the type "flaw implies fix" and "attack type implies flaw", so as to enhance training in secure coding which in turn would augment secure software development. We propose to build a learner-friendly intelligent tutoring system (ITS) based on the newly discovered security patterns and rules explored. We present our proposed model based on association rule mining in secure software development with the goal of building this ITS. Our proposed model and prototype experiments are discussed in this paper along with challenges and ongoing work.

A Cyber Attack is a sudden attempt launched by cybercriminals against multiple computers or networks. According to evolution of cyber space, insider attack is the most serious attack faced by end users, all over the world. Cyber Security reports shows that both US federal Agency as well as different organizations faces insider threat. Machine learning (ML) provide an important technology to secure data from insider threats. Random Forest is the best algorithm that focus on user's action, services and ability for insider attack detection based on data granularity. Substantial raise in the count of decision tree, increases the time consumption and complexity of Random Forest. A novel algorithm Known as Random Forest With Randomized Weighted Fuzzy Feature Set (RF-RWFF) is developed. Fuzzy Membership Function is used for feature aggregation and Randomized Weighted Majority Algorithm (RWMA) is used in the prediction part of Random Forest (RF) algorithm to perform voting. RWMA transform conventional Random Forest, to a perceptron like algorithm and increases the miliage. The experimental results obtained illustrate that the proposed model exhibits an overall improvement in accuracy and recall rate with very much decrease in time complexity compared to conventional Random Forest algorithm. This algorithm can be used in organization and government sector to detect insider fastly and accurately.

We present a scalable architecture based on a trained filter bank for input pre-processing and a recurrent neural network (RNN) for the detection of atrial fibrillation in electrocardiogram (ECG) signals, with the focus on enabling a very efficient hardware implementation as application-specific integrated circuit (ASIC). Our already very efficient base architecture is further improved by replacing the RNN with a delta-encoded gated recurrent unit (GRU) and adding a confidence measure (CM) for terminating the computation as early as possible. With these optimizations, we demonstrate a reduction of the processing load of 58 % on an internal dataset while still achieving near state-of-the-art classification results on the Physionet ECG dataset with only 1202 parameters.

The rapid progress experienced in the Internet of Things (IoT) space is one that has introduced new and unique challenges for cybersecurity and IoT-Forensics. One of these problems is how digital forensics and incident response (DFIR) are handled in IoT. Since enormous users use IoT platforms to accomplish their day to day task, massive amounts of data streams are transferred with limited hardware resources; conducting DFIR needs a new approach to mitigate digital evidence and incident response challenges owing to the facts that there are no unified standard or classified principles for IoT forensics. Today's IoT DFIR relies on self-defined best practices and experiences. Given these challenges, IoT-related incidents need a more structured approach in identifying problems of DFIR. In this paper, we examined the major DFIR challenges in IoT by exploring the different phases involved in a DFIR when responding to IoT-related incidents. This study aims to provide researchers and practitioners a road-map that will help improve the standards of IoT security and DFIR.

In the computer era, various digital devices are used along with networking technology for data communication in secured manner. But sometimes these systems are misused by the attackers. Information security with the high efficiency devices, tools are utilized for protecting the communication media and valuable data. In case of any unwanted incidents and security breaches, digital forensics methods and measures are well utilized for detecting the type of attacks, sources of attacks, their purposes. By utilizing information related to security measures, digital forensics evidences with suitable methodologies, digital forensics investigators detect the cyber-crimes. It is also necessary to prove the cyber-crimes before the law enforcement department. During this process investigators type to collect different types of information from the digital devices concerned to the cyber-attack. One of the major tasks of the digital investigator is collecting and managing the seizure records from the crime-scene. The present paper discusses the seizure record framework for digital forensics investigations.

This paper proposes a scheme for secure telecommunication based on synchronizing a chaotic Liu system with a nontrivial Lyapunov candidate, which allows for the control signal to act only on one state of the slave system. The proposal has the advantages of being robust against disturbances (internal and external) and simple, which is essential because it leads to significant cost reductions when implemented using analog electronics. A simulation study, which considers the presence of disturbances, is used to validate the theoretical results and show the easy implementation of the proposed approach.

We propose a localized oscillation amplitude monitoring (OAM) method for the mitigation of cyber threats directed at the wide area control (WAC) system used to coordinate control of Flexible AC Transmission Systems (FACTS) for power oscillation damping (POD) of active power flow on inter-area tie lines. The method involves monitoring the inter-area tie line active power oscillation amplitude over a sliding window. We use system instability - inferred from oscillation amplitudes growing instead of damping - as evidence of an indication of a malfunction in the WAC of FACTS, possibly indicative of a cyber attack. Monitoring the presence of such a growth allows us to determine whether any destabilizing behaviors appear after the WAC system engages to control the POD. If the WAC signal increases the oscillation amplitude over time, thereby diminishing the POD performance, the FACTS falls back to POD using local measurements. The proposed method does not require an expansive system-wide view of the network. We simulate replay, control integrity, and timing attacks for a test system and present results that demonstrate the performance of the OAM method for mitigation.

Security and privacy threat modeling is commonly applied to systematically identify and address design-level security and privacy concerns in the early stages of architecture and design. Identifying and resolving these threats should remain a continuous concern during the development lifecycle. Especially with contemporary agile development practices, a single-shot upfront analysis becomes quickly outdated. Despite it being explicitly recommended by experts, existing threat modeling approaches focus largely on early development phases and provide limited support during later implementation phases.In this paper, we present an integrated threat analysis toolchain to support automated, continuous threat elicitation, assessment, and mitigation as part of a continuous integration pipeline in the GitLab DevOps platform. This type of automation allows for continuous attention to security and privacy threats during development at the level of individual commits, supports monitoring and managing the progress in addressing security and privacy threats over time, and enables more advanced and fine-grained analyses such as assessing the impact of proposed changes in different code branches or merge/pull requests by analyzing the changes to the threat model.

We propose a stability monitoring approach for the mitigation of cyber threats directed at the wide area control (WAC) system used for coordinated control of Flexible AC Transmission Systems (FACTS) used for power oscillation damping (POD) of active power flow on inter-area tie lines. The approach involves monitoring the modes of the active power oscillation on an inter-area tie line using the Matrix Pencil (MP) method. We use the stability characteristics of the observed modes as a proxy for the presence of destabilizing cyber threats. We monitor the system modes to determine whether any destabilizing modes appear after the WAC system engages to control the POD. If the WAC signal exacerbates the POD performance, the FACTS falls back to POD using local measurements. The proposed approach does not require an expansive system-wide view of the network. We simulate replay, control integrity, and timing attacks for a test system and present results that demonstrate the performance of the SM approach for mitigation.

Attack surface detection for the complex software is needed to find targets for the fuzzing, because testing the whole system with many inputs is not realistic. Researchers that previously applied taint analysis for dealing with different security tasks in the virtual machines did not examined how to apply it for attack surface detection. I.e., getting the program modules and functions, that may be affected by input data. We propose using taint tracking within a virtual machine and virtual machine introspection to create a new approach that can detect the internal module interfaces that can be fuzz tested to assure that software is safe or find the vulnerabilities.

One of the significant difficulties in network safety is the arrangement of a mechanized and viable digital danger's location strategy. This paper presents an AI procedure for digital dangers recognition, in light of fake neural organizations. The proposed procedure changes large number of gathered security occasions over to singular occasion profiles and utilize a profound learning-based discovery strategy for upgraded digital danger identification. This research work develops an AI-SIEM framework dependent on a blend of occasion profiling for information preprocessing and distinctive counterfeit neural organization techniques by including FCNN, CNN, and LSTM. The framework centers around separating between obvious positive and bogus positive cautions, consequently causing security examiners to quickly react to digital dangers. All trials in this investigation are performed by creators utilizing two benchmark datasets (NSLKDD and CICIDS2017) and two datasets gathered in reality. To assess the presentation correlation with existing techniques, tests are carried out by utilizing the five ordinary AI strategies (SVM, k-NN, RF, NB, and DT). Therefore, the exploratory aftereffects of this examination guarantee that our proposed techniques are fit for being utilized as learning-based models for network interruption discovery and show that despite the fact that it is utilized in reality, the exhibition beats the traditional AI strategies.

Software vulnerabilities are weaknesses in software systems that can have serious consequences when exploited. Examples of side effects include unauthorized authentication, data breaches, and financial losses. Due to the nature of the software industry, companies are increasingly pressured to deploy software as quickly as possible, leading to a large number of undetected software vulnerabilities. Static code analysis, with the support of Static Analysis Tools (SATs), can generate security alerts that highlight potential vulnerabilities in an application's source code. Software Metrics (SMs) have also been used to predict software vulnerabilities, usually with the support of Machine Learning (ML) classification algorithms. Several datasets are available to support the development of improved software vulnerability detection techniques. However, they suffer from the same issues: they are either outdated or use a single type of information. In this paper, we present a methodology for collecting software vulnerabilities from known vulnerability databases and enhancing them with static information (namely SAT alerts and SMs). The proposed methodology aims to define a mechanism capable of more easily updating the collected data.

After the emergence of the cloud architecture, many companies migrate their data from conventional storage i.e., on bare metal to the cloud storage. Since then huge amount of data was stored on cloud servers, which later resulted in redundancy of huge amount of data. Hence in this cloud world, many data de-duplication techniques has been widely used. Not only the redundancy but also made data more secure and privacy of the existing data were also increased. Some techniques got limitations and some have their own advantages based on the requirements. Some of the attributes like data privacy, tag regularity and interruption to brute-force attacks. To make data deduplication technique more efficient based on the requirements. This paper will discuss schemes that brace user-defined access control, by allowing the service provider to get information of the information owners. Thus our scheme eliminates redundancy of the data without breaching the privacy and security of clients that depends on service providers. Our lastest deduplication scheme after performing various algorithms resulted in conclusion and producing more efficient data confidentiality and tag consistency. This paper has discussion on various techniques and their drawbacks for the effectiveness of the deduplication.

Cloud based cyber physical system (CPS) enables individuals to store and share data collected from both cyberspace and the physical world. This leads to the proliferation of massive data at a user's local site. Since local storage systems can't store and maintain huge data, it is a wise and practical way to outsource such huge data to the cloud. Cloud storage provides scalable storage space to manage data economically and flexibly. However, the integrity of outsourced data is a critical challenge because user's lose control of their data once it's transferred to cloud servers. Several auditing schemes have been put forward based on public key infrastructure (PKI) or identity-based cryptography to verify data integrity. However, “the PKI-based schemes suffer from certificate management problem and identity-based schemes face the key escrow” problem. Therefore, to address these problems, certificateless public auditing schemes have been introduced on the basis of bilinear pairing, which incur high computation overhead, and thus it is not suitable for CPS. To reduce the computation overhead, in this paper, Using elliptic curve cryptography, we propose an efficient pairing-free certificateless public auditing scheme for cloud-based CPS. The proposed scheme is more secure against type I/II/III adversaries and efficient compared to other certificateless based schemes.

Cloud computing has revolutionized the way how users store, process, and use data. It has evolved over the years to put forward various sophisticated models that offer enhanced performance. The growth of electronic data stored in the Cloud has made it crucial to access data without data loss and leakage. Security threats still prevent significant corporations that use sensitive data to employ cloud computing to handle their data. Traditional cryptographic techniques like DES, AES, etc... provide data confidentiality but are computationally complex. To overcome such complexities, a unique field of cryptography known as DNA Cryptography came into existence. DNA cryptography is a new field of cryptography that utilizes the chemical properties of DNA for secure data encoding. DNA cryptographic algorithms are much faster than traditional cryptographic methods and can bring about greater security with lesser computational costs. In this paper, we have proposed an enhanced DNA cryptosystem involving operations such as encryption, encoding table generation, and decryption based on the chemical properties of DNA. The performance analysis has proven that the proposed DNA cryptosystem is secure and efficient in Cloud data storage.

Implementing the color images encryption is a challenging field of the research for IOT applications. An exponential growth in imaging cameras in IOT uses makes it critical to design the robust image security algorithms. It is also observed that performance of existing encryption methods degrades under the presence of noisy environments. This is the major concern of evaluating the encryption method in this paper. The prime concern of this paper is to design the fast efficient color images encryption algorithm by designing an efficient and robustness RSA encryption algorithm. Method takes the advantage of both preprocessing and the Gaussian pyramid (GP) approach for encryption. To improve the performance it is proposed to use the LAB color space and implement the RSA encryption on luminance (L) component using the GP domain. The median filter and image sharpening is used for preprocessing. The goal is to improve the performance under highly noisy imaging environment. The performance is compared based on the crypto weights and on the basis of visual artifacts and entropy analysis. The decrypted outputs are again converted to color image output. Using the LAB color space is expected to improve the entropy performance of the image. Result of proposed encryption method is evaluated under the different types of the noisy attacks over the color images and also performance is compared with state of art encryption methods. Significant improvement speed of the algorithm is compared in terms of the elapsed time

In this paper, we extend the existing classification of signature models by Cao. To do so, we present a new signature classification framework and migrate the original classification to build an easily extendable faceted signature classification. We propose 20 new properties, 7 property families, and 1 signature classification type. With our classification, theoretically, up to 11 541 420 signature classes can be built, which should cover almost all existing signature schemes.

Differential privacy is a concept to quantity the disclosure of private information that is controlled by the privacy parameter ε. However, an intuitive interpretation of ε is needed to explain the privacy loss to data engineers and data subjects. In this paper, we conduct a worst-case study of differential privacy risks. We generalize an existing model and reduce complexity to provide more understandable statements on the privacy loss. To this end, we analyze the impact of parameters and introduce the notion of a global privacy risk and global privacy leak.

Crafting a national cyber strategy is an enormous undertaking. In this article we review the process by which the Cyberspace Solarium Commission generated the Solarium Commission Report, developed the strategy of layered cyber deterrence, and strategized for legislative success in implementing its recommendations. This is an article about the development of a whole-of-nation strategy. Once the production of the strategy of layered cyber deterrence is explained, the article goes on to elaborate on implementation strategies, the challenge of escalation management, and future efforts to ensure that the work of the Solarium Commission becomes entrenched in U.S. national cyber strategy and behavior. We review the work left undone by the Solarium Commission, highlighting the enormous effort that went into the process of building out a strategy to defend a nation.11It takes a village; we thank the entire Solarium Commission team, as their efforts generated the final Commission Report and the legislative successes that followed. In some ways, this article seeks to chronicle the process of building a strategy that was developed through the efforts of hundreds of people. This work reflects the process that we went through to construct the Solarium Commission report, which is particular to our experience; others may have had different recollections of the events under consideration. Brandon Valeriano is also a Senior Fellow at the Cato Institute and a Senior Advisor to the Cyberspace Solarium Commission. Benjamin Jensen is also a Scholar in Residence at American University and the Research Director for the Cyberspace Solarium Commission.

Traffic classification is fundamental to network operators to manage the network better. L7 classification and Deep Packet Inspection (DPI) using regular expressions are vital components to provide application-aware traffic classification. Nevertheless, there are open challenges yet, such as programmability and performance combined with security. In this paper, we introduce eBPFlow, a fast application layer packet classifier in hardware. eBPFlow allows packet classification with DPI on packet headers and payloads in runtime. It enables programming of regular expressions (RegEx) and security protocols using eBPF (extended Berkeley Packet Filter). We built eBPFlow on NetFPGA SUME 40 Gbps and created several application classifiers. The tests were performed in a physical testbed. Our results show that eBPFlow supports packet classification on the application layer with line rate. It only consumes 22 W.