Biblio

To prevent all sorts of attacks, the technology of security service function chains (SFC) is proposed in recent years, it becomes an attractive research highlights. Dynamic orchestration algorithm can create SFC according to the resource usage of network security functions. The current research on creating SFC focuses on a single domain. However in reality the large and complex networks are divided into security domains according to different security levels and managed separately. Therefore, we propose a cross-security domain dynamic orchestration algorithm to create SFC for network security functions based on ant colony algorithm(ACO) and consider load balancing, shortest path and minimum delay as optimization objectives. We establish a network security architecture based on the proposed algorithm, which is suitable for the industrial vertical scenarios, solves the deployment problem of the dynamic orchestration algorithm. Simulation results verify that our algorithm achieves the goal of creating SFC across security domains and demonstrate its performance in creating service function chains to resolve abnormal traffic flows.

Ensuring the network security, resists the malicious traffic attacks as much as possible, and ensuring the network security, the Gated Recurrent Unit (GRU) and Convolutional Neural Network (CNN) are combined. Then, a Software Defined Networking (SDN) anomaly detection architecture is built and continuously optimized to ensure network security as much as possible and enhance the reliability of the detection architecture. The results show that the proposed network architecture can greatly improve the accuracy of detection, and its performance will be different due to the different number of CNN layers. When the two-layer CNN structure is selected, its performance is the best among all algorithms. Especially, the accuracy of GRU- CNN-2 is 98.7%, which verifies that the proposed method is effective. Therefore, under deep learning, the utilization of GRU- CNN to explore and optimize the SDN anomaly detection is of great significance to ensure information transmission security in the future.

In existing Communication Based Train Control (CBTC) system, information security threats are analyzed, then information security demands of CBTC system are put forward. To protect information security, three security domains are divided according the Safety Integrity Level (SIL)) of CBTC system. Information security architecture of CBTC system is designed, special use firewalls and intrusion detection system are adopted. Through this CBTC system security are enhanced and operation safety is ensured.

The 5G network systems are evolving and have complex network infrastructures. There is a great deal of work in this area focused on meeting the stringent service requirements for the 5G networks. Within this context, security requirements play a critical role as 5G networks can support a range of services such as healthcare services, financial and critical infrastructures. 3GPP and ETSI have been developing security frameworks for 5G networks. Our work in 5G security has been focusing on the design of security architecture and mechanisms enabling dynamic establishment of secure and trusted end to end services as well as development of mechanisms to proactively detect and mitigate security attacks in virtualised network infrastructures. The focus of this paper is on the latter, namely the facilities and mechanisms, and the design of a security architecture providing facilities and mechanisms to detect and mitigate specific security attacks. We have developed a simplified version of the security architecture using Software Defined Networks (SDN) and Network Function Virtualisation (NFV) technologies. The specific security functions developed in this architecture can be directly integrated into the 5G core network facilities enhancing its security.

Due to the wide deployment of deep learning applications in safety-critical systems, robust and secure execution of deep learning workloads is imperative. Adversarial examples, where the inputs are carefully designed to mislead the machine learning model is among the most challenging attacks to detect and defeat. The most dominant approach for defending against adversarial examples is to systematically create a network architecture that is sufficiently robust. Neural Architecture Search (NAS) has been heavily used as the de facto approach to design robust neural network models, by using the accuracy of detecting adversarial examples as a key metric of the neural network's robustness. While NAS has been proven effective in improving the robustness (and accuracy in general), the NAS-generated network models run noticeably slower on typical DNN accelerators than the hand-crafted networks, mainly because DNN accelerators are not optimized for robust NAS-generated models. In particular, the inherent multi-branch nature of NAS-generated networks causes unacceptable performance and energy overheads.To bridge the gap between the robustness and performance efficiency of deep learning applications, we need to rethink the design of AI accelerators to enable efficient execution of robust (auto-generated) neural networks. In this paper, we propose a novel hardware architecture, NASGuard, which enables efficient inference of robust NAS networks. NASGuard leverages a heuristic multi-branch mapping model to improve the efficiency of the underlying computing resources. Moreover, NASGuard addresses the load imbalance problem between the computation and memory-access tasks from multi-branch parallel computing. Finally, we propose a topology-aware performance prediction model for data prefetching, to fully exploit the temporal and spatial localities of robust NAS-generated architectures. We have implemented NASGuard with Verilog RTL. The evaluation results show that NASGuard achieves an average speedup of 1.74× over the baseline DNN accelerator.

With the rise of Internet of Things (IoT) devices, home network management and security are becoming complex. There is an urgent requirement to make smart home network management more efficient. This work proposes an SDN-based architecture to secure smart home networks through K-Nearest Neighbor (KNN) based device classifications and malicious traffic detection. The efficiency is enhanced by offloading the computation-intensive KNN model to a Field Programmable Gate Arrays (FPGA). Furthermore, we propose a custom KNN solution that exhibits the best performance on an FPGA compared with four alternative KNN instances (i.e., 78% faster than a parallel Bubble Sort-based implementation and 99% faster than three other sorting algorithms). Moreover, with 36,225 training samples, the proposed KNN solution classifies a test query with 95% accuracy in approximately 4 ms on an FPGA compared to 57 seconds on a CPU platform. This highlights the promise of FPGA-based platforms for edge computing applications in the smart home.

Wireless Sensor Network (WSN)is the most promising area which is widely used in the field of military, healthcare systems, flood control, and weather forecasting system. In WSN every node is connected with another node and exchanges the information from one to another. While sending data between nodes data security is an important factor. Security is a vital issue in the area of networking. This paper addresses the issue of security in terms of distinct attacks and their solutions provided by the different authors. Whenever data is transferred from source to destination then it follows some route so there is a possibility of a malicious node in the network. It is a very difficult task to identify the malicious node present in the network. Insecurity intruder attacks on data packets that are transferred from one node to another node. While transferring the data from source to destination node hacker hacks the data and changes the actual data. In this paper, we have discussed the numerous security solution provided by the different authors and they had used the Machine Learning (ML) approach to handle the attacks. Various ML techniques are used to determine the authenticity of the node. Network attacks are elaborated according to the layer used for WSN architecture. In this paper, we will categorize the security attacks according to layer-wise and type-wise and represent the solution using the ML technique for handling the security attack.

How to prevent the computer system from being interfered by external factors and maintain a strong working state is a problem that needs to be solved at present. At present, encryption and network security defense systems are important technical means of security defense. Based on this research background, the paper proposes an AES data encryption scheme in the Hadoop big data environment. The AES algorithm performs several rounds of plaintext encryption through the steps of round key addition, byte replacement, row displacement, column confusion, etc. Under the MapReduce architecture, the plaintext data is divided into multiple data fragments. The Map function is responsible for the AES algorithm encryption operation, and the Reduce function Combine encrypted data information. Finally, the paper designs a computer network security defense system that can actively discover the security threats in the network and effectively prevent them, so as to ensure the normal and safe operation of the network. At the same time, we use the encryption algorithm on the computer network security defense system. Experimental research has proved that this method can safely transmit network data packets. With the increase of computing cluster nodes, its encryption transmission efficiency continues to improve. This solution not only solves the problem of computer network data security encryption, but also realizes the parallel transmission of encrypted data in the information age.

The development and popularization of big data technology bring more convenience to users, it also bring a series of computer network security problems. Therefore, this paper will briefly analyze the network security threats faced by users under the background of big data, and then combine the application function of computer network security defense system based on big data to propose an architecture design of computer network security defense system based on big data.

IoT networks today face a myriad of security vulnerabilities in their infrastructure due to its wide attack surface. Large-scale networks are increasingly adopting a Software-Defined Networking approach, it allows for simplified network control and management through network virtualization. Since traditional security mechanisms are incapable of handling virtualized environments, SDSec or Software-Defined Security is introduced as a solution to support virtualized infrastructure, specifically aimed at providing security solutions to SDN frameworks. To further aid large scale design and development of SDN frameworks, Model-Driven Engineering (MDE) has been proposed to be used at the design phase, since abstraction, automation and analysis are inherently key aspects of MDE. This provides an efficient approach to reducing large problems through models that abstract away the complex technicality of the total system. Making adaptations to these models to address security issues faced in IoT networks, largely reduces cost and improves efficiency. These models can be simulated, analysed and supports architecture model adaptation; model changes are then reflected back to the real system. We propose a model-driven security approach for SDSec networks that can self-adapt using machine learning to mitigate security threats. The overall design time changes can be monitored at run time through machine learning techniques (e.g. deep, reinforcement learning) for real time analysis. This approach can be tested in IoT simulation environments, for instance using the CAPS IoT modeling and simulation framework. Using self-adaptation of models and advanced machine learning for data analysis would ensure that the SDSec architecture adapts and improves over time. This largely reduces the overall attack surface to achieve improved end-to-end security in IoT environments.

The construction of the power Internet of Things has led various terminals to access the corporate network on a large scale. The internal and external business interaction and data exchange are more extensive. The current security protection system is based on border isolation protection. This is difficult to meet the needs of the power Internet of Things connection and open shared services. This paper studies the application scheme of the ``zero trust'' typical business scenario of the power Internet of Things with ``Continuous Identity Authentication and Dynamic Access Control'' as the core, and designs the power internet security protection architecture based on zero trust.

This paper presents an initial architecture to manage End-to-End Network Slices which, once deployed, are associated with Security Service Level Agreement(s) to increase the security on the virtual deployed resources and create End-to-End Secure Network Slices. Moreover, the workflows regarding the Network Slicing provisioning and the whole SSLA Lifecycle management is detailed.

Software Defined Networking (SDN) is disruptive networking technology which adopts a centralised framework to facilitate fine-grained network management. However security in SDN is still in its infancy and there is need for significant work to deal with different attacks in SDN. In this paper we discuss some of the possible attacks on SDN switches and propose techniques for detecting the attacks on switches. We have developed a Switch Security Application (SSA)for SDN Controller which makes use of trusted computing technology and some additional components for detecting attacks on the switches. In particular TPM attestation is used to ensure that switches are in trusted state during boot time before configuring the flow rules on the switches. The additional components are used for storing and validating messages related to the flow rule configuration of the switches. The stored information is used for generating a trusted report on the expected flow rules in the switches and using this information for validating the flow rules that are actually enforced in the switches. If there is any variation to flow rules that are enforced in the switches compared to the expected flow rules by the SSA, then, the switch is considered to be under attack and an alert is raised to the SDN Administrator. The administrator can isolate the switch from network or make use of trusted report for restoring the flow rules in the switches. We will also present a prototype implementation of our technique.

Majority of the daily and business activities nowadays are integrated and interconnected to the world across national, geographic and boundaries. Securing the Internet of Things (IoT) system is a challenge as these low powered devices in IoT system are very vulnerable to cyber-attacks and this will reduce the reliability of the system. Software Defined Network (SDN) intends to greatly facilitate the policy enforcement and dynamic network reconfiguration. This paper presents several architectures in the integration of IoT via SDN to improve security in the network and system.

Hardware-assisted isolation technology provide a Trusted Execution Environment (TEE) for the Trusted Computing Base (TCB) of a system. Since there is no standardization for such systems, many technologies using different approaches have been implemented over time. Before selecting or implementing a TEE, it is essential to understand the security architecture, features and analyze the technologies with respect to the new security vulnerabilities (i.e. Micro-architectural class of vulnerabilities). These technologies can be divided into two main types: 1) Isolation by software virtualization and 2) Isolation by hardware. In this paper, we discuss technology implementation of each type i.e. Intel SGX and ARM TrustZone for type-1; Intel ME and AMD Secure Processor for type-2. We also cover the vulnerability analysis against each technology with respect to the latest discovered attacks. This would enable a user to precisely appreciate the security capabilities of each technology.

The characteristics of resource sharing and centralized deployment of network function virtualization (NFV) make the physical boundary under the traditional closed management mode disappear, bringing many new security threats to the network. To improve the security of the NFV network, this paper proposes a network function virtualization security architecture based on mimic defense. At the same time, to ensure the differences between heterogeneous entities, a genetic algorithm-based heterogeneous entities pool construction method is proposed. Simulation results show that this method can effectively guarantee the difference between heterogeneous entities and increase the difficulty of attackers.

With the improvement of people's living standards, more and more network users access the network, including a large number of infrastructure, these devices constitute the Internet of things(IoT). With the rapid expansion of devices in the IoT, the data transmission between the IoT has become more complex, and the security issues are facing greater challenges. SDN as a mature network architecture, its security has been affirmed by the industry, it separates the data layer from the control layer, thus greatly improving the security of the network. In this paper, we apply the SDN to the IoT, and propose a IoT network architecture based on SDN. In this architecture, we not only make use of the security features of SDN, but also deploy different security modules in each layer of SDN to integrate, analyze and plan various data through the IoT, which undoubtedly improves the security performance of the network. In the end, we give a comprehensive introduction to the system and verify its performance.

The new network based on software-defined network SDN and network function virtualization NFV will replace the traditional network, so it is urgent to study the network security architecture based on the new network environment. This paper presents a software - defined security SDS architecture. It is open and universal. It provides an open interface for security services, security devices, and security management. It enables different network security vendors to deploy security products and security solutions. It can realize the deployment, arrangement and customization of virtual security function VSFs. It implements fine-grained data flow control and security policy management. The author analyzes the different types of attacks that different parts of the system are vulnerable to. The defender can disable the network attacks by changing the server-side security configuration scheme. The future research direction of network security is put forward.

Integrated with various electronic control units (ECUs), vehicles are becoming more intelligent with the assistance of essential connections. However, the interaction with the outside world raises great concerns on cyber-attacks. As a main standard for in-vehicle network, Controller Area Network (CAN) does not have any built-in security mechanisms to guarantee a secure communication. This increases risks of denial of service, remote control attacks by an attacker, posing serious threats to underlying vehicles, property and human lives. As a result, it is urgent to develop an effective in-vehicle network intrusion detection system (IDS) for better security. In this paper, we propose a Feature-based Sliding Window (FSW) to extract the feature of CAN Data Field and CAN IDs. Then we construct a convolutional encoder network (CEN) to detect network intrusion of CAN networks. The proposed FSW-CEN method is evaluated on real-world datasets. The experimental results show that compared to traditional data processing methods and convolutional neural networks, our method is able to detect attacks with a higher accuracy in terms of detection accuracy and false negative rate.

Internet of Medical Things (IoMT) are getting popular in the smart healthcare domain. These devices are resource-constrained and are vulnerable to attack. As the IoMTs are connected to the healthcare network infrastructure, it becomes the primary target of the adversary due to weak security and privacy measures. In this regard, this paper proposes a security architecture for smart healthcare network infrastructures. The architecture uses various security components or services that are developed and deployed as virtual network functions. This makes the security architecture ready for future network frameworks such as OpenMANO. Besides, in this security architecture, only authenticated and trusted IoMTs serve the patients along with an encryption-based communication protocol, thus creating a secure, privacy-preserving and trusted healthcare network infrastructure.

Considering the problem of network security under the background of big data, the clustering analysis algorithms can be utilized to improve the correctness of network intrusion detection models for security management. As a kind of iterative clustering analysis algorithm, K-means algorithm is not only simple but also efficient, so it is widely used. However, the traditional K-means algorithm cannot well solve the network security problem when facing big data due to its high complexity and limited processing ability. In this case, this paper proposes to optimize the traditional K-means algorithm based on the Spark platform and deploy the optimized clustering analysis algorithm in the distributed architecture, so as to improve the efficiency of clustering algorithm for network intrusion detection in big data environment. The experimental result shows that, compared with the traditional K-means algorithm, the efficiency of the optimized K-means algorithm using a Spark-based method is significantly improved in the running time.

Cloud, Software-Defined Networking (SDN), and Network Function Virtualization (NFV) technologies have introduced a new era of cybersecurity threats and challenges. To protect cloud infrastructure, in our earlier work, we proposed Software Defined Security Service (SDS2) to tackle security challenges centered around a new policy-based interaction model. The security architecture consists of three main components: a Security Controller, Virtual Security Functions (VSF), and a Sec-Manage Protocol. However, the security architecture requires an agile and specific protocol to transfer interaction parameters and security messages between its components where OpenFlow considers mainly as network routing protocol. So, The Sec-Manage protocol has been designed specifically for obtaining policy-based interaction parameters among cloud entities between the security controller and its VSFs. This paper focuses on the design and the implementation of the Sec-Manage protocol and demonstrates its use in setting, monitoring, and conveying relevant policy-based interaction security parameters.

Enterprise networks are increasingly moving towards Software Defined Networking, which is becoming a major trend in the networking arena. With the increased popularity of SDN, there is a greater need for security measures for protecting the enterprise networks. This paper focuses on the design and implementation of an integrated security architecture for SDN based enterprise networks. The integrated security architecture uses a policy-based approach to coordinate different security mechanisms to detect and counteract a range of security attacks in the SDN. A distinguishing characteristic of the proposed architecture is its ability to deal with dynamic changes in the security attacks as well as changes in trust associated with the network devices in the infrastructure. The adaptability of the proposed architecture to dynamic changes is achieved by having feedback between the various security components/mechanisms in the architecture and managing them using a dynamic policy framework. The paper describes the prototype implementation of the proposed architecture and presents security and performance analysis for different attack scenarios. We believe that the proposed integrated security architecture provides a significant step towards achieving a secure SDN for enterprises.

Flow-based network attack detection technology is able to identify many threats in network traffic. Existing techniques have several drawbacks: i) rule-based approaches are vulnerable because it needs all the signatures defined for the possible attacks, ii) anomaly-based approaches are not efficient because it is easy to find ways to launch attacks that bypass detection, and iii) both rule-based and anomaly-based approaches heavily rely on domain knowledge of networked system and cyber security. The major challenge to existing methods is to understand novel attack scenarios and design a model to detect novel and more serious attacks. In this paper, we investigate network attacks and unveil the key activities and the relationships between these activities. For that reason, we propose methods to understand the network security practices using theoretic concepts such as graph kernels. In addition, we integrate graph kernels over deep learning architecture to exploit the relationship expressiveness among network flows and combine ability of deep neural networks (DNNs) with deep architectures to learn hidden representations, based on the communication representation graph of each network flow in a specific time interval, then the flow-based network attack detection can be done effectively by measuring the similarity between the graphs to two flows. The proposed study provides the effectiveness to obtain insights about network attacks and detect network attacks. Using two real-world datasets which contain several new types of network attacks, we achieve significant improvements in accuracies over existing network attack detection tasks.

The Internet of Things (IoT) is increasingly being used in applications ranging from precision agriculture to critical national infrastructure by deploying a large number of resource-constrained devices in hostile environments. These devices are being exploited to launch attacks in cyber systems. As a result, security has become a significant concern in the design of IoT based applications. In this paper, we present a security architecture for IoT networks by leveraging the underlying features supported by Software Defined Networks (SDN). Our security architecture restricts network access to authenticated IoT devices. We use fine granular policies to secure the flows in the IoT network infrastructure and provide a lightweight protocol to authenticate IoT devices. Such an integrated security approach involving authentication of IoT devices and enabling authorized flows can help to protect IoT networks from malicious IoT devices and attacks.