Biblio
IoT (Internet of Things) is a network of interconnected devices, designed to collect and exchange data which can then turn it into information, eventually into wisdom. IoT is a region where digital world converges with physical world. With the evolution of IoT, it is expected to create substantial impact on human lives. IoT ecosystem produces and exchanges sizeable data due to which IoT becomes an attractive target for adversary. The large-scale interconnectivity leads to various potential risk related to information security. Security assurance in IoT ecosystem is one of the major challenges to address. In this context, embedded security becomes a key issue in IoT devices which are constrained in terms of processing, power, memory and bandwidth. The focus of this paper is on the recommended design considerations for constrained IoT devices with the objective to achieve security by default. Considering established set of protocols along with best practices during design and development stage can address majority of security challenges.
Software Defined Networking (SDN) is a paradigm shift that changes the working principles of IP networks by separating the control logic from routers and switches, and logically centralizing it within a controller. In this architecture the control plane (controller) communicates with the data plane (switches) through a control channel using a standards-compliant protocol, that is, OpenFlow. While having a centralized controller creates an opportunity to monitor and program the entire network, as a side effect, it causes the control plane to become a single point of failure. Denial of service (DoS) attacks or even heavy control traffic conditions can easily become real threats to the proper functioning of the controller, which indirectly detriments the entire network. In this paper, we propose a solution to reduce the control traffic generated primarily during table-miss events. We utilize the buffer\_id feature of the OpenFlow protocol, which has been designed to identify individually buffered packets within a switch, reusing it to identify flows buffered as a series of packets during table-miss, which happens when there is no related rule in the switch flow tables that matches the received packet. Thus, we allow the OpenFlow switch to send only the first packet of a flow to the controller for a table-miss while buffering the rest of the packets in the switch memory until the controller responds or time out occurs. The test results show that OpenFlow traffic is significantly reduced when the proposed method is used.
Software-defined networking (SDN) is enabling radically easier deployment of new routing infrastructures in enterprise and operator networks. However, it is not clear how to best exploit this flexibility, when also considering the migration costs. In this paper, we use tools from network economics to study a recent proposal of using information-centric networking (ICN) principles on an SDN infrastructure for improving the delivery of Internet Protocol (IP) services. The key value proposition of this IP-over-ICN approach is to use the native and lightweight multicast service delivery enabled by the ICN technology to reduce network load by removing redundant data. Our analysis shows that for services where IP multicast delivery is technically feasible, IP-over-ICN deployments are economically sensible if only few users will access the given service simultaneously. However, for services where native IP multicast is not a technically feasible option, such as for dynamically generated or personalized content, IP-over-ICN significantly outperforms IP.
Software Defined Networking (SDN) stands to transmute our modern networks and data centers, opening them up into highly agile frameworks that can be reconfigured depending on the requirement. Denial of Service (DoS) attacks are considered as one of the most destructive attacks. This paper, is about DoS attack detection and mitigation using SDN. DoS attack can minimize the bandwidth utilization, leaving the network unavailable for legitimate traffic. To provide a solution to the problem, concept of performance aware Software Defined Networking is used which involves real time network monitoring using sFlow as a visibility protocol. So, OpenFlow along with sFlow is used as an application to fight DoS attacks. Our analysis and results demonstrate that using this technique, DoS attacks are successfully defended implying that SDN has promising potential to detect and mitigate DoS attacks.
Vulnerabilities of controller that is caused by separation of control and forwarding lead to a threat which attacker can take remote access detection in SDN. The current work proposes a controller architecture called secure control plane (SCP) that enhances security and increase the difficulty of the attack through a rotation of heterogeneous and multiple controllers. Specifically, a dynamic-scheduling method based on Bayesian Stackelberg Games is put forward to maximize security reward of defender during each migration. Secondly, introducing a self-cleaning mechanism combined with game strategy aims at improving the secure level and form a closed-loop defense mechanism; Finally, the experiments described quantitatively defender will get more secure gain based on the game strategy compared with traditional strategy (pure and random strategies), and the self-cleaning mechanism can make the control plane to be in a higher level of security.
The SDN (Software Defined Networking) paradigm rings flexibility to the network management and is an enabler to offer huge opportunities for network programmability. And, to solve the scalability issue raised by the centralized architecture of SDN, multi-controllers deployment (or distributed controllers system) is envisioned. In this paper, we focus on increasing the diversity of SDN control plane so as to enhance the network security. Our goal is to limit the ability of a malicious controller to compromise its neighboring controllers, and by extension, the rest of the controllers. We investigate a heterogeneous Susceptible-Infectious-Susceptible (SIS) epidemic model to evaluate the security performance and propose a coloring algorithm to increase the diversity based on community detection. And the simulation results demonstrate that our algorithm can reduce infection rate in control plane and our work shows that diversity must be introduced in network design for network security.
SDN is a new network framework which can be controlled and defined by software programming, and OpenFlow is the communication protocol between SDN controller plane and data plane. With centralized control of SDN, the network is more vulnerable encounter APT than traditional network. After deeply analyzing the process of APT at each stage in SDN, this paper proposes the APT detection method based on HMM, which can fully reflect the relationship between attack behavior and APT stage. Experiment shows that the method is more accurate to detect APT in SDN, and less overhead.
Vehicular Ad Hoc Networks (VANETs) enable vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications that bring many benefits and conveniences to improve the road safety and drive comfort in future transportation systems. Sybil attack is considered one of the most risky threats in VANETs since a Sybil attacker can generate multiple fake identities with false messages to severely impair the normal functions of safety-related applications. In this paper, we propose a novel Sybil attack detection method based on Received Signal Strength Indicator (RSSI), Voiceprint, to conduct a widely applicable, lightweight and full-distributed detection for VANETs. To avoid the inaccurate position estimation according to predefined radio propagation models in previous RSSI-based detection methods, Voiceprint adopts the RSSI time series as the vehicular speech and compares the similarity among all received time series. Voiceprint does not rely on any predefined radio propagation model, and conducts independent detection without the support of the centralized infrastructure. It has more accurate detection rate in different dynamic environments. Extensive simulations and real-world experiments demonstrate that the proposed Voiceprint is an effective method considering the cost, complexity and performance.
Internet of Things (IoT) is an emerging paradigm in information technology (IT) that integrates advancements in sensing, computing and communication to offer enhanced services in everyday life. IoTs are vulnerable to sybil attacks wherein an adversary fabricates fictitious identities or steals the identities of legitimate nodes. In this paper, we model sybil attacks in IoT and evaluate its impact on performance. We also develop a defense mechanism based on behavioural profiling of nodes. We develop an enhanced AODV (EAODV) protocol by using the behaviour approach to obtain the optimal routes. In EAODV, the routes are selected based on the trust value and hop count. Sybil nodes are identified and discarded based on the feedback from neighbouring nodes. Evaluation of our protocol in ns-2 simulator demonstrates the effectiveness of our approach in identifying and detecting sybil nodes in IoT network.
Due to improvements in defensive systems, network threats are becoming increasingly sophisticated and complex as cybercriminals are using various methods to cloak their actions. This, among others, includes the application of network steganography e.g. to hide the communication between an infected host and a malicious control server by embedding commands into innocent-looking traffic. Currently, a new subtype of such methods called inter-protocol steganography emerged. It utilizes relationships between two or more overt protocols to hide data. In this paper, we present new inter-protocol hiding techniques which are suitable for real-time services. Afterwards, we introduce and present preliminary results of a novel steganography detection approach which relies on network traffic coloring.
In Sybil attacks, a physical adversary takes multiple fabricated or stolen identities to maliciously manipulate the network. These attacks are very harmful for Internet of Things (IoT) applications. In this paper we implemented and evaluated the performance of RPL (Routing Protocol for Low-Power and Lossy Networks) routing protocol under mobile sybil attacks, namely SybM, with respect to control overhead, packet delivery and energy consumption. In SybM attacks, Sybil nodes take the advantage of their mobility and the weakness of RPL to handle identity and mobility, to flood the network with fake control messages from different locations. To counter these type of attacks we propose a trust-based intrusion detection system based on RPL.
Trusted routing is a hot spot in network security. Lots of efforts have been made on trusted routing validation for Interior Gateway Protocols (IGP), e.g., using Public Key Infrastructure (PKI) to enhance the security of protocols, or routing monitoring systems. However, the former is limited by further deployment in the practical Internet, the latter depends on a complete, accurate, and fresh knowledge base-this is still a big challenge (Internet Service Providers (ISPs) are not willing to leak their routing policies). In this paper, inspired by the idea of centrally controlling in Software Defined Network (SDN), we propose a CENtrally Trusted Routing vAlidation framework, named CENTRA, which can automated collect routing information, centrally detect anomaly and deliver secure routing policy. We implement the proposed framework using NETCONF as the communication protocol and YANG as the data model. The experimental results reveal that CENTRA can detect and block anomalous routing in real time. Comparing to existing secure routing mechanism, CENTRA improves the detection efficiency and real-time significantly.
Distributed attacks originating from botnet-infected machines (bots) such as large-scale malware propagation campaigns orchestrated via spam emails can quickly affect other network infrastructures. As these attacks are made successful only by the fact that hundreds of infected machines engage in them collectively, their damage can be avoided if machines infected with a common botnet can be detected early rather than after an attack is launched. Prior studies have suggested that outgoing bot attacks are often preceded by other ``tell-tale'' malicious behaviour, such as communication with botnet controllers (C&C servers) that command botnets to carry out attacks. We postulate that observing similar behaviour occuring in a synchronised manner across multiple machines is an early indicator of a widespread infection of a single botnet, leading potentially to a large-scale, distributed attack. Intuitively, if we can detect such synchronised behaviour early enough on a few machines in the network, we can quickly contain the threat before an attack does any serious damage. In this work we present a measurement-driven analysis to validate this intuition. We empirically analyse the various stages of malicious behaviour that are observed in real botnet traffic, and carry out the first systematic study of the network behaviour that typically precedes outgoing bot attacks and is synchronised across multiple infected machines. We then implement as a proof-of-concept a set of analysers that monitor synchronisation in botnet communication to generate early infection and attack alerts. We show that with this approach, we can quickly detect nearly 80% of real-world spamming and port scanning attacks, and even demonstrate a novel capability of preventing these attacks altogether by predicting them before they are launched.
The deployment of Software Defined Networking (SDN) and Network Functions Virtualization (NFV) technologies is increasing, with security as a recognized application driving adoption. However, despite the potential with SDN/NFV for automated and adaptive network security services, the controller interaction presents both a performance and scalability challenge, and a threat vector. To overcome the performance issue, stateful data-plane designs have been proposed. However, these solutions do not offer protection from SDN-specific attacks linked to necessary control functions such as link reconfiguration and switch identification. In this work, we leverage the OpenState framework to introduce state-based SDN security protection mechanisms. The extensions required for this design are presented with respect to an SDN configuration-based attack. The demonstration shows the ability of the SDN Configuration (CFG) security protection mechanism to support legitimate relocation requests and to protect against malicious connection attempts.
Cloud computing is a revolution in IT technology that provides scalable, virtualized on-demand resources to the end users with greater flexibility, less maintenance and reduced infrastructure cost. These resources are supervised by different management organizations and provided over Internet using known networking protocols, standards and formats. The underlying technologies and legacy protocols contain bugs and vulnerabilities that can open doors for intrusion by the attackers. Attacks as DDoS (Distributed Denial of Service) are ones of the most frequent that inflict serious damage and affect the cloud performance. In a DDoS attack, the attacker usually uses innocent compromised computers (called zombies) by taking advantages of known or unknown bugs and vulnerabilities to send a large number of packets from these already-captured zombies to a server. This may occupy a major portion of network bandwidth of the victim cloud infrastructures or consume much of the servers time. Thus, in this work, we designed a DDoS detection system based on the C.4.5 algorithm to mitigate the DDoS threat. This algorithm, coupled with signature detection techniques, generates a decision tree to perform automatic, effective detection of signatures attacks for DDoS flooding attacks. To validate our system, we selected other machine learning techniques and compared the obtained results.
The majority of available wearable computing devices require communication with Internet servers for data analysis and storage, and rely on a paired smartphone to enable secure communication. However, many wearables are equipped with WiFi network interfaces, enabling direct communication with the Internet. Secure communication protocols could then run on these wearables themselves, yet it is not clear if they can be efficiently supported.,,,,In this paper, we show that wearables are ready for direct and secure Internet communication by means of experiments with both controlled local web servers and Internet servers. We observe that the overall energy consumption and communication delay can be reduced with direct Internet connection via WiFi from wearables compared to using smartphones as relays via Bluetooth. We also show that the additional HTTPS cost caused by TLS handshake and encryption is closely related to the number of parallel connections, and has the same relative impact on wearables and smartphones.
The paper suggests several techniques for computer network risk assessment based on Common Vulnerability Scoring System (CVSS) and attack modeling. Techniques use a set of integrated security metrics and consider input data from security information and event management (SIEM) systems. Risk assessment techniques differ according to the used input data. They allow to get risk assessment considering requirements to the accuracy and efficiency. Input data includes network characteristics, attacks, attacker characteristics, security events and countermeasures. The tool that implements these techniques is presented. Experiments demonstrate operation of the techniques for different security situations.
In the Internet of Things (IoT), smart devices are connected using various communication protocols, such as Wi-Fi, ZigBee. Some IoT devices have multiple built-in communication modules. If an IoT device equipped with multiple communication protocols is compromised by an attacker using one communication protocol (e.g., Wi-Fi), it can be exploited as an entry point to the IoT network. Another protocol (e.g., ZigBee) of this IoT device could be used to exploit vulnerabilities of other IoT devices using the same communication protocol. In order to find potential attacks caused by this kind of cross-protocol devices, we group IoT devices based on their communication protocols and construct a graphical security model for each group of devices using the same communication protocol. We combine the security models via the cross-protocol devices and compute hidden attack paths traversing different groups of devices. We use two use cases in the smart home scenario to demonstrate our approach and discuss some feasible countermeasures.
Attack graph technique is a common tool for the evaluation of network security. However, attack graphs are generally too large and complex to be understood and interpreted by security administrators. This paper proposes an analysis framework for security attack graphs for a given IT infrastructure system. First, in order to facilitate the discovery of interconnectivities among vulnerabilities in a network, multi-host multi-stage vulnerability analysis (MulVAL) is employed to generate an attack graph for a given network topology. Then a novel algorithm is applied to refine the attack graph and generate a simplified graph called a transition graph. Next, a Markov model is used to project the future security posture of the system. Finally, the framework is evaluated by applying it on a typical IT network scenario with specific services, network configurations, and vulnerabilities.
Identity-Based Encryption (IBE) was introduced as an elegant concept for secure data exchange due to its simplified key management by specifically addressing the asymmetric key distribution problems in multi-user scenarios. In the context of ad-hoc network connections that are of particular importance in the emerging Internet of Things, the simple key discovery procedures as provided by IBE are very beneficial in many situations. In this work we demonstrate for the first time that IBE has become practical even for a range of embedded devices that are populated with low-cost ARM Cortex-M microcontrollers or reconfigurable hardware components. More precisely, we adopt the IBE scheme proposed by Ducas et al. at ASIACRYPT 2014 based on the RLWE problem for which we provide implementation results for two security levels on the aforementioned embedded platforms. We give evidence that the implementations of the basic scheme are efficient, as for a security level of 80 bits it requires 103 ms and 36 ms for encryption and decryption, respectively, on the smallest ARM Cortex-M0 microcontroller.
Internet of Thing (IoT) provide services by linking the different platform devices. They have the limitation in providing intelligent service. The IoT devices are heterogeneous which includes wireless sensors to less resource constrained devices. These devices are prone to hardware/software and network attacks. If not properly secured, it may lead to security issues like privacy and confidentiality. To resolve the above problem, an Intelligent Security Framework for IoT Devices is proposed in this paper. The proposed method is made up of (1) the light weight Asymmetric cryptography for securing the End-To-End devices which protects the IoT service gateway and the low power sensor nodes and (2) implements Lattice-based cryptography for securing the Broker devices/Gateway and the cloud services. The proposed architecture implements Asymmetric Key Encryption to share session key between the nodes and then uses this session key for message transfer This protects the system from Distributed Denial of Service Attacks, eavesdropping and Quantum algorithm attacks. The proposed protocol uses the unique Device ID of the sensors to generate key pair to establish mutual authentication between Devices and Services. Finally, the Mutual authentication mechanism is implemented in the gateway.
This paper presents a novel feature learning model for cyber security tasks. We propose to use Auto-encoders (AEs), as a generative model, to learn latent representation of different feature sets. We show how well the AE is capable of automatically learning a reasonable notion of semantic similarity among input features. Specifically, the AE accepts a feature vector, obtained from cyber security phenomena, and extracts a code vector that captures the semantic similarity between the feature vectors. This similarity is embedded in an abstract latent representation. Because the AE is trained in an unsupervised fashion, the main part of this success comes from appropriate original feature set that is used in this paper. It can also provide more discriminative features in contrast to other feature engineering approaches. Furthermore, the scheme can reduce the dimensionality of the features thereby signicantly minimising the memory requirements. We selected two different cyber security tasks: networkbased anomaly intrusion detection and Malware classication. We have analysed the proposed scheme with various classifiers using publicly available datasets for network anomaly intrusion detection and malware classifications. Several appropriate evaluation metrics show improvement compared to prior results.
Honeypots are servers or systems built to mimic critical parts of a network, distracting attackers while logging their information to develop attack profiles. This paper discusses the design and implementation of a honeypot disguised as a REpresentational State Transfer (REST) Application Programming Interface (API). We discuss the motivation for this work, design features of the honeypot, and experimental performance results under various traffic conditions. We also present analyses of both a distributed denial of service (DDoS) attack and a cross-site scripting (XSS) malware insertion attempt against this honeypot.