Biblio

Hiding contents of users' messages has been successfully addressed before, while anonymization of message senders remains a challenge since users do not usually trust ISPs and messaging application providers. To resolve this challenge, several solutions have been proposed so far. Among them, the Dining Cryptographers network protocol (DC-net) provides the strongest anonymity guarantees. However, DC-net suffers from two critical issues that makes it impractical, i.e., (1) collision possibility and (2) vulnerability against disruptions. Apart from that, we noticed a third critical issue during our investigation. (3) DC-net users can be deanonymized after they publish at least three messages. We name this problem the short stability issue and prove that anonymity is provided only for a few cycles of message publishing. As far as we know, this problem has not been identified in the previous research works. In this paper, we propose Harmonized and Stable DC-net (HSDC-net), a self-organizing protocol for anonymous communications. In our protocol design, we first resolve the short stability issue and obtain SDC-net, a stable extension of DC-net. Then, we integrate the Slot Reservation and Disruption Management sub-protocols into SDC-net to overcome the collision and security issues, respectively. The obtained HSDC-net protocol can also be integrated into blockchain-based cryptocurrencies (e.g. Bitcoin) to mix multiple transactions (belonging to different users) into a single transaction in such a way that the source of each payment is unknown. This preserves privacy of blockchain users. Our prototype implementation shows that HSDC-net achieves low latencies that makes it a practical protocol.

Security issues severely restrict the development and popularization of cloud computing. As a way of data leakage, covert channel greatly threatens the security of cloud platform. This paper introduces the types and research status of covert channels, and discusses the classical detection and interference methods of time-covert channels on cloud platforms for shared memory time covert channels.

Identifying services constituting traffic from given IP network flows is essential to various applications, such as the management of quality of service (QoS) and the prevention of security issues. Typical methods for achieving this objective include identifications based on IP addresses and port numbers. However, such methods are not sufficiently accurate and require improvement. Deep Packet Inspection (DPI) is one of the most promising methods for improving the accuracy of identification. In addition, many current IP flows are encrypted using Transport Layer Security (TLS). Hence, it is necessary for identification methods to analyze flows encrypted by TLS. For that reason, a service identification method based on DPI and n-gram that focuses only on the non-encrypted parts in the TLS session establishment was proposed. However, there is room for improvement in identification accuracy because this method analyzes all the non-encrypted parts including Random Values without protocol analyses. In this paper, we propose a method for identifying the service from given IP flows based on analysis of Server Name Indication (SNI). The proposed method clusters flow according to the value of SNI and identify services from the occurrences of all clusters. Our evaluations, which involve identifications of services on Google and Yahoo sites, demonstrate that the proposed method can identify services more accurately than the existing method.

Content Delivery Networks(CDN) is a standout amongst the most encouraging innovations that upgrade performance for its clients' websites by diverting web demands from browsers to topographically dispersed CDN surrogate nodes. However, due to the variable nature of CDN, it suffers from various security and resource allocation issues. The most common attack which is used to bring down a whole network as well as CDN without even finding a loophole in the security is DDoS. In this proposal, we proposed a distributed virtual honeypot model for diminishing DDoS attacks and prevent intrusion in securing CDN. Honeypots are specially utilized to imitate the primary server with the goal that the attack is alleviated to the fake rather than the main server. Our proposed layer based model utilizes honeypot to be more effective reducing the cost of the system as well as maintaining the smooth delivery in geographically dispersed servers without performance degradation.

Communication is considered as an essential part of our lives. Different medium was used for exchange of information, but due to advancement in field of technology, different network setup came into existence. One of the most suited in wireless field is Wireless Sensor Network (WSN). These networks are set up by self-organizing nodes which operate over radio environment. Since communication is done more rapidly, they are confined to many attacks which operate at different layers. In order to have efficient communication, some security measure must be introduced in the network ho have secure communication. In this paper, we describe various attacks functioning at different layers also one of the common network layer attack called Blackhole Attack with its mitigation technique using Intrusion Detection System (IDS) over network simulator ns2 has been discussed.

Today's IP and content distribution networks are unable to fulfill all data distribution and security requirements. The named data network (NDN) has emerged as a promising candidate to cope with the Internet usage of the 21st century. Although the NDN has many built-in security features, this survey reviews several pressing security issues and open research areas.

An information system based on real-time file integrations has an important role in today's organizations' work process management. By connecting to the network, file flow and integration between corporate systems have gained a great significance. In addition, network and security issues have emerged depending on the file structure and transfer processes. Thus, there has become a need for an effective and self-learning anomaly detection module for file transfer processes in order to provide the persistence of integration channels, accountability of transfer logs and data integrity. This paper proposes a novel anomaly detection approach that focuses on file size and integration duration of file transfers between enterprise systems. For this purpose, size and time anomalies on transferring files will be detected by a machine learning-based structure. Later, an alarm system is going to be developed in order to inform the authenticated individuals about the anomalies.

The network coding optimization based on niche genetic algorithm can observably reduce the network overhead of encoding technology, however, security issues haven't been considered in the coding operation. In order to solve this problem, we propose a network coding optimization scheme for niche algorithm based on security performance (SNGA). It is on the basis of multi-target niche genetic algorithm(NGA)to construct a fitness function which with k-secure network coding mechanism, and to ensure the realization of information security and achieve the maximum transmission of the network. The simulation results show that SNGA can effectively improve the security of network coding, and ensure the running time and convergence speed of the optimal solution.

IoT trust management is a security solution that assures the trust between different IoT entities before establishing any relationship with other anonymous devices. Recent researches presented in the literature tend to use a Blockchain-based trust management model for IoT besides the fog node approach in order to address the constraints of IoT resources. Actually, Blockchain has solved many drawbacks of centralized models. However, it is still not preferable for dealing with massive data produced by IoT because of its drawbacks such as delay, network overhead, and scalability issues. Therefore, in this paper we define some factors that should be considered when designing scalable models, and we propose a fully distributed trust management model for IoT that provide a large-scale trust model and address the limitations of Blockchain. We design our model based on a new approach called Holochain considering some security issues, such as detecting misbehaviors, data integrity and availability.

Whenever one accesses a computer system there are three essential security issues involved: identification, authentication and authorization. The identification process enables recognition of an entity, which may be either a human, a machine, or another asset - e.g. software program. Two complementary mechanisms are used for determining who can access those systems: authentication and authorization. To address the authentication process, various solutions have been proposed in the literature, from a simple password to newer technologies based on biometrics or RFID (Radio Frequency Identification). This paper presents a novel scalable multi-factor authentication method, applicable to computer systems with no need of any hardware/software changes.

Software security is becoming a high priority for both large companies and start-ups alike due to the increasing potential for harm that vulnerabilities and breaches carry with them. However, attaining robust security assurance while delivering features requires a precarious balancing act in the context of agile development practices. One path forward to help aid development teams in securing their software products is through the design and development of security-focused automation. Ergo, we present a novel approach, called SecureReqNet, for automatically identifying whether issues in software issue tracking systems describe security-related content. Our approach consists of a two-phase neural net architecture that operates purely on the natural language descriptions of issues. The first phase of our approach learns high dimensional word embeddings from hundreds of thousands of vulnerability descriptions listed in the CVE database and issue descriptions extracted from open source projects. The second phase then utilizes the semantic ontology represented by these embeddings to train a convolutional neural network capable of predicting whether a given issue is security-related. We evaluated SecureReqNet by applying it to identify security-related issues from a dataset of thousands of issues mined from popular projects on GitLab and GitHub. In addition, we also applied our approach to identify security-related requirements from a commercial software project developed by a major telecommunication company. Our preliminary results are encouraging, with SecureReqNet achieving an accuracy of 96% on open source issues and 71.6% on industrial requirements.

The deployment of smart devices in IoT applications are increasing with tremendous pace causing severe security concerns, as it trade most of private information. To counter that security issues in low resource applications, lightweight cryptographic algorithms have been introduced in recent past. In this paper we propose efficient hardware architecture of piccolo lightweight algorithm uses 64 bits block size with variable key size of length 80 and 128 bits. This paper introduces novel hardware architecture of piccolo-80, to supports high speed RFID security applications. Different design strategies are there to optimize the hardware metrics trade-off for particular application. The algorithm is implemented on different family of FPGAs with different devices to analyze the performance of design in 4 input LUTs and 6 input LUTs implementations. In addition, the results of hardware design are evaluated and compared with the most relevant lightweight block ciphers, shows the proposed architecture finds its utilization in terms of speed and area optimization from the hardware resources. The increment in throughput with optimized area of this architecture suggests that piccolo can applicable to implement for ultra-lightweight applications also.

Intrusion detection is one essential tool towards building secure and trustworthy Cloud computing environment, given the ubiquitous presence of cyber attacks that proliferate rapidly and morph dynamically. In our current working paradigm of resource, platform and service consolidations, Cloud Computing provides a significant improvement in the cost metrics via dynamic provisioning of IT services. Since almost all cloud computing networks lean on providing their services through Internet, they are prone to experience variety of security issues. Therefore, in cloud environments, it is necessary to deploy an Intrusion Detection System (IDS) to detect new and unknown attacks in addition to signature based known attacks, with high accuracy. In our deliberation we assume that a system or a network ``anomalous'' event is synonymous to an ``intrusion'' event when there is a significant departure in one or more underlying system or network activities. There are couple of recently proposed ideas that aim to develop a hybrid detection mechanism, combining advantages of signature-based detection schemes with the ability to detect unknown attacks based on anomalies. In this work, we propose a network based anomaly detection system at the Cloud Hypervisor level that utilizes a hybrid algorithm: a combination of K-means clustering algorithm and SVM classification algorithm, to improve the accuracy of the anomaly detection system. Dataset from UNSW-NB15 study is used to evaluate the proposed approach and results are compared with previous studies. The accuracy for our proposed K-means clustering model is slightly higher than others. However, the accuracy we obtained from the SVM model is still low for supervised techniques.

In autonomous driving, security issues from robotic and automotive applications are converging toward each other. A novel approach for deriving secret keys using a lightweight cipher in the firmware of low-end control units is introduced. By evaluating the method on a typical low-end automotive platform, we demonstrate the reusability of the cipher for message authentication. The proposed solution counteracts a known security issue in the robotics and automotive domain.

The increasing integration of information and communication technologies has undoubtedly boosted the efficiency of Critical Infrastructures (CI). However, the first wave of IoT devices, together with the management of enormous amount of data generated by modern CIs, has created serious architectural issues. While the emerging Fog and Multi-Access Edge Computing (FMEC) paradigms can provide a viable solution, they also bring inherent security issues, that can cause dire consequences in the context of CIs. In this paper, we analyze the applications of FMEC solutions in the context of CIs, with a specific focus on related security issues and threats for the specific while broad scenarios: a smart airport, a smart port, and a smart offshore oil and gas extraction field. Leveraging these scenarios, a set of general security requirements for FMEC is derived, together with crucial research challenges whose further investigation is cornerstone for a successful adoption of FMEC in CIs.

Medical Internet of Things (MIoT) offers innovative solutions to a healthier life, making radical changes in people's lives. Healthcare providers are enabled to continuously and remotely monitor their patients for many medial issues outside hospitals and healthcare providers' offices. MIoT systems and applications lead to increase availability, accessibility, quality and cost-effectiveness of healthcare services. On the other hand, MIoT devices generate a large amount of diverse real-time data, which is highly sensitive. Thus, securing medical data is an essential requirement when developing MIoT architectures. However, the MIoT architectures being developed in the literature have many security issues. To address the challenge of data security in MIoT, the integration of fog computing and MIoT is studied as an emerging and appropriate solution. By data security, it means that medial data is stored in fog nodes and transferred to the cloud in a secure manner to prevent any unauthorized access. In this paper, we propose a design for a secure fog-cloud based architecture for MIoT.

Since the term “Fog Computing” has been coined by Cisco Systems in 2012, security and privacy issues of this promising paradigm are still open challenges. Among various security challenges, Access Control is a crucial concern for all cloud computing-like systems (e.g. Fog computing, Mobile edge computing) in the IoT era. Therefore, assigning the precise level of access in such an inherently scalable, heterogeneous and dynamic environment is not easy to perform. This work defines the uncertainty challenge for authentication phase of the access control in fog computing because on one hand fog has a number of characteristics that amplify uncertainty in authentication and on the other hand applying traditional access control models does not result in a flexible and resilient solution. Therefore, we have proposed a novel prediction model based on the extension of Attribute Based Access Control (ABAC) model. Our data-driven model is able to handle uncertainty in authentication. It is also able to consider the mobility of mobile edge devices in order to handle authentication. In doing so, we have built our model using and comparing four supervised classification algorithms namely as Decision Tree, Naïve Bayes, Logistic Regression and Support Vector Machine. Our model can achieve authentication performance with 88.14% accuracy using Logistic Regression.

Primary user emulation (PUE) attack causes security issues in a cognitive radio network (CRN) while sensing the unused spectrum. In PUE attack, malicious users transmit an emulated primary signal in spectrum sensing interval to secondary users (SUs) to forestall them from accessing the primary user (PU) spectrum bands. In the present paper, the defense against such attack by Neyman-Pearson criterion is shown in terms of total error probability. Impact of several parameters such as attacker strength, attacker's presence probability, and signal-to-noise ratio on SU is shown. Result shows proposed method protect the harmful effects of PUE attack in spectrum sensing.

Many governments organizations in Libya have started transferring traditional government services to e-government. These e-services will benefit a wide range of public. However, deployment of e-government bring many new security issues. Attackers would take advantages of vulnerabilities in these e-services and would conduct cyber attacks that would result in data loss, services interruptions, privacy loss, financial loss, and other significant loss. The number of vulnerabilities in e-services have increase due to the complexity of the e-services system, a lack of secure programming practices, miss-configuration of systems and web applications vulnerabilities, or not staying up-to-date with security patches. Unfortunately, there is a lack of study being done to assess the current security level of Libyan government websites. Therefore, this study aims to assess the current security of 16 Libyan government websites using penetration testing framework. In this assessment, no exploits were committed or tried on the websites. In penetration testing framework (pen test), there are four main phases: Reconnaissance, Scanning, Enumeration, Vulnerability Assessment and, SSL encryption evaluation. The aim of a security assessment is to discover vulnerabilities that could be exploited by attackers. We also conducted a Content Analysis phase for all websites. In this phase, we searched for security and privacy policies implementation information on the government websites. The aim is to determine whether the websites are aware of current accepted standard for security and privacy. From our security assessment results of 16 Libyan government websites, we compared the websites based on the number of vulnerabilities found and the level of security policies. We only found 9 websites with high and medium vulnerabilities. Many of these vulnerabilities are due to outdated software and systems, miss-configuration of systems and not applying the latest security patches. These vulnerabilities could be used by cyber hackers to attack the systems and caused damages to the systems. Also, we found 5 websites didn't implement any SSL encryption for data transactions. Lastly, only 2 websites have published security and privacy policies on their websites. This seems to indicate that these websites were not concerned with current standard in security and privacy. Finally, we classify the 16 websites into 4 safety categories: highly unsafe, unsafe, somewhat unsafe and safe. We found only 1 website with a highly unsafe ranking. Based on our finding, we concluded that the security level of the Libyan government websites are adequate, but can be further improved. However, immediate actions need to be taken to mitigate possible cyber attacks by fixing the vulnerabilities and implementing SSL encryption. Also, the websites need to publish their security and privacy policy so the users could trust their websites.

Cloud Storage Service(CSS) provides unbounded, robust file storage capability and facilitates for pay-per-use and collaborative work to end users. But due to security issues like lack of confidentiality, malicious insiders, it has not gained wide spread acceptance to store sensitive information. Researchers have proposed proxy re-encryption schemes for secure data sharing through cloud. Due to advancement of computing technologies and advent of quantum computing algorithms, security of existing schemes can be compromised within seconds. Hence there is a need for designing security schemes which can be quantum computing resistant. In this paper, a secure file sharing scheme through cloud storage using proxy re-encryption technique has been proposed. The proposed scheme is proven to be chosen ciphertext secure(CCA) under hardness of ring-LWE, Search problem using random oracle model. The proposed scheme outperforms the existing CCA secure schemes in-terms of re-encryption time and decryption time for encrypted files which results in an efficient file sharing scheme through cloud storage.

From the last few years, security in wireless sensor network (WSN) is essential because WSN application uses important information sharing between the nodes. There are large number of issues raised related to security due to open deployment of network. The attackers disturb the security system by attacking the different protocol layers in WSN. The standard AODV routing protocol faces security issues when the route discovery process takes place. The data should be transmitted in a secure path to the destination. Therefore, to support the process we have proposed a trust based intrusion detection system (NL-IDS) for network layer in WSN to detect the Black hole attackers in the network. The sensor node trust is calculated as per the deviation of key factor at the network layer based on the Black hole attack. We use the watchdog technique where a sensor node continuously monitors the neighbor node by calculating a periodic trust value. Finally, the overall trust value of the sensor node is evaluated by the gathered values of trust metrics of the network layer (past and previous trust values). This NL-IDS scheme is efficient to identify the malicious node with respect to Black hole attack at the network layer. To analyze the performance of NL-IDS, we have simulated the model in MATLAB R2015a, and the result shows that NL-IDS is better than Wang et al. [11] as compare of detection accuracy and false alarm rate.

The Cloud computing in simple terms is storing and accessing data through internet. The data stored in the cloud is managed by cloud service providers. Storing data in cloud saves users time and memory. But once user stores data in cloud, he loses the control over his data. Hence there must be some security issues to be handled to keep users data safely in the cloud. In this work, we projected a secure auditing system using Third Party Auditor (TPA). We used Advanced Encryption Standard (AES) algorithm for encrypting user's data and Secure Hash Algorithm (SHA-2) to compute message digest. The system is executed in Amazon EC2 cloud by creating windows server instance. The results obtained demonstrates that our proposed work is safe and takes a firm time to audit the files.

Named Data Networking (NDN) is the most mature proposal of the Information Centric Networking paradigm, a clean-slate approach for the Future Internet. Although NDN was designed to tackle security issues inherent to IP networks natively, newly introduced security attacks in its transitional phase threaten NDN's practical deployment. Therefore, a security monitoring plane for NDN is indispensable before any potential deployment of this novel architecture in an operating context by any provider. We propose an approach for the monitoring and anomaly detection in NDN nodes leveraging Bayesian Network techniques. A list of monitored metrics is introduced as a quantitative measure to feature the behavior of an NDN node. By leveraging the hypothesis testing theory, a micro detector is developed to detect whenever the metric significantly changes from its normal behavior. A Bayesian network structure that correlates alarms from micro detectors is designed based on the expert knowledge of the NDN specification and the NFD implementation. The relevance and performance of our security monitoring approach are demonstrated by considering the Content Poisoning Attack (CPA), one of the most critical attacks in NDN, through numerous experiment data collected from a real NDN deployment.

Nowadays, the rapid development of the Internet of Things facilitates human life and work, while it also brings great security risks to the society due to the frequent occurrence of various security issues. IoT device has the characteristics of large-scale deployment and single responsibility application, which makes it easy to cause a chain reaction and results in widespread privacy leakage and system security problems when the software vulnerability is identified. It is difficult to guarantee that there is no security hole in the IoT operating system which is usually designed for MCU and has no kernel mode. An alternative solution is to identify the security issues in the first time when the system is hijacked and suspend the suspicious task before it causes irreparable damage. This paper proposes KLRA (A Kernel Level Resource Auditing Tool) for IoT Operating System Security This tool collects the resource-sensitive events in the kernel and audit the the resource consumption pattern of the system at the same time. KLRA can take fine-grained events measure with low cost and report the relevant security warning in the first time when the behavior of the system is abnormal compared with daily operations for the real responsibility of this device. KLRA enables the IoT operating system for MCU to generate the security early warning and thereby provides a self-adaptive heuristic security mechanism for the entire IoT system.

The Machine Type Communication Devices (MTCDs) are usually based on Internet Protocol (IP), which can cause billions of connected objects to be part of the Internet. The enormous amount of data coming from these devices are quite heterogeneous in nature, which can lead to security issues, such as injection attacks, ballot stuffing, and bad mouthing. Consequently, this work considers machine learning trust evaluation as an effective and accurate option for solving the issues associate with security threats. In this paper, a comparative analysis is carried out with five different machine learning approaches: Naive Bayes (NB), Decision Tree (DT), Linear and Radial Support Vector Machine (SVM), KNearest Neighbor (KNN), and Random Forest (RF). As a critical element of the research, the recommendations consider different Machine-to-Machine (M2M) communication nodes with regard to their ability to identify malicious and honest information. To validate the performances of these models, two trust computation measures were used: Receiver Operating Characteristics (ROCs), Precision and Recall. The malicious data was formulated in Matlab. A scenario was created where 50% of the information were modified to be malicious. The malicious nodes were varied in the ranges of 10%, 20%, 30%, 40%, and the results were carefully analyzed.