Biblio

Internet of Things (IoT) era has gradually entered our life, with the rapid development of communication and embedded system, IoT technology has been widely used in many fields. Therefore, to maintain the security of the IoT system is becoming a priority of the successful deployment of IoT networks. This paper presents an intrusion detection model based on improved Deep Belief Network (DBN). Through multiple iterations of the genetic algorithm (GA), the optimal network structure is generated adaptively, so that the intrusion detection model based on DBN achieves a high detection rate. Finally, the KDDCUP data set was used to simulate and evaluate the model. Experimental results show that the improved intrusion detection model can effectively improve the detection rate of intrusion attacks.

So-called IoT, based on use of enabling technologies like 5G, Wi-Fi, BT, NFC, RFID, IPv6 as well as being widely applied for sensor networks, robots, Wearable and Cyber-PHY, invades rapidly to our every day. There are a lot of apps and software platforms to IoT support. However, a most important problem of QoS optimization, which lays in Performance, Reliability and Scalability for IoT, is not yet solved. The extended Internet of the future needs these solutions based on the cooperation between fog and clouds with delegating of the analytics blocks via agents, adaptive interfaces and protocols. The next problem is as follows: IoT can generate large arrays of unmanaged, weakly-structured, and non-configured data of various types, known as "Big Data". The given papers deals with the both problems. A special problem is Security and Privacy in potentially "dangerous" IoTscenarios. Anyway, this subject needs as special discussion for risks evaluation and cooperative intrusion detection. Some advanced approaches for optimization of Performance, Reliability and Scalability for IoT-solutions are offered within the paper. The paper discusses the Best Practises and Case Studies aimed to solution of the established problems.

The advancement and penetration of distributed energy resources (DERs) and renewable energy sources (RES) are transforming legacy energy systems in an attempt to reduce carbon emissions and energy waste. Demand Response (DR) has been identified as a key enabler of integrating these, and other, Smart Grid technologies, while, simultaneously, ensuring grid stability and secure energy supply. The massive deployment of smart meters, IoT devices and DERs dictate the need to move to decentralized, or even localized, DR schemes in the face of the increased scale and complexity of monitoring and coordinating the actors and devices in modern smart grids. Furthermore, there is an inherent need to guarantee interoperability, due to the vast number of, e.g., hardware and software stakeholders, and, more importantly, promote trust and incentivize the participation of customers in DR schemes, if they are to be successfully deployed.In this work, we illustrate the design of an energy system that addresses all of the roadblocks that hinder the large scale deployment of DR services. Our DR framework incorporates modern Smart Grid technologies, such as fog-enabled and IoT devices, DERs and RES to, among others, automate asset handling and various time-consuming workflows. To guarantee interoperability, our system employs OpenADR, which standardizes the communication of DR signals among energy stakeholders. Our approach acknowledges the need for decentralization and employs blockchains and smart contracts to deliver a secure, privacy-preserving, tamper-resistant, auditable and reliable DR framework. Blockchains provide the infrastructure to design innovative DR schemes and incentivize active consumer participation as their aforementioned properties promote transparency and trust. In addition, we harness the power of smart contracts which allows us to design and implement fully automated contractual agreements both among involved stakeholders, as well as on a machine-to-machine basis. Smart contracts are digital agents that "live" in the blockchain and can encode, execute and enforce arbitrary agreements. To illustrate the potential and effectiveness of our smart contract-based DR framework, we present a case study that describes the exchange of DR signals and the autonomous instantiation of smart contracts among involved participants to mediate and monitor transactions, enforce contractual clauses, regulate energy supply and handle payments/penalties.

Remote attestation is a security technique through which a remote trusted party (i.e., Verifier) checks the trust-worthiness of a potentially untrusted device (i.e., Prover). In the Internet of Things (IoT) systems, the existing remote attestation protocols propose various approaches to detect the modified software and physical tampering attacks. However, in an inter-operable IoT system, in which IoT devices interact autonomously among themselves, an additional problem arises: a compromised IoT service can influence the genuine operation of other invoked service, without changing the software of the latter. In this paper, we propose a protocol for Remote Attestation of Distributed IoT Services (RADIS), which verifies the trust-worthiness of distributed IoT services. Instead of attesting the complete memory content of the entire interoperable IoT devices, RADIS attests only the services involved in performing a certain functionality. RADIS relies on a control-flow attestation technique to detect IoT services that perform an unexpected operation due to their interactions with a malicious remote service. Our experiments show the effectiveness of our protocol in validating the integrity status of a distributed IoT service.

As a national strategic hot spot, the Internet of Things (IoT) has shown its vigor and vitality. With the development of IoT, its application in power grid is more and more extensive. As an advanced technology for information sensing and transmission, IoT has been applied extensively in power generation, transmission, transformation, distribution, utilization and other processes, and will develop with broad prospect in smart grid. Narrow Band Internet of Things (NB-IoT) is of broad application prospects in production management, life-cycle asset management and smart power utilization of smart grid. Its characteristics and security demands of application domain present a challenge for the security of electric power business. However, current protocols either need dual authentication and key agreements, or have poor compatibility with current network architecture. In order to improve the high security of power network data transmission, an end-to-end security authentication protocol of NB-IoT for smart grid based on physical unclonable function and state secret algorithm SM3 is proposed in this paper. A self-controllable NB-IoT application layer security architecture was designed by introducing the domestic cryptographic algorithm, extending the existing key derivation structure of LTE, and combining the physical unclonable function to ensure the generation of encryption keys between NB-IoT terminals and power grid business platforms. The protocol of this paper realizes secure data transmission and bidirectional identity authentication between IoT devices and terminals. It is of low communication costs, lightweight and flexible key update. In addition, the protocol also supports terminal authentication during key agreement, which furtherly enhances the security of business systems in smart grid.

The Internet of Things (IoT) is growing rapidly controlling and connecting thousands of devices every day. The increased number of interconnected devices increase the network traffic leading to energy and Quality of Service efficiency problems of the IoT network. Therefore, IoT platforms and networks are susceptible to failures and attacks that have significant economic and security consequences. In this regard, implementing effective secure IoT platforms and networks are valuable for both the industry and society. In this paper, we propose two frameworks that aim to verify a number of security policies related to runtime information of the network and dynamic flow routing paths, respectively. The underlying rationale is to allow the operator of an IoT network in order to have an overall control of the network and to define different policies based on the demands of the network and the use cases (e.g., achieving more secure or faster network).

This paper documents an Internet of Things (IoT) middleware specially tailored to address the security, and operational requirements expected from an effective IoT platform. In essence, the middleware exposes a diverse palette of features, including authentication, authorization, auditing, confidentiality and integrity of data. Besides these aspects, the middleware encapsulates an IoT object abstraction layer that builds a generic object model that is independent from the device type (i.e., hardware, software, vendor). Furthermore, it builds on standards and specifications to accomplish a highly resilient and scalable solution. The approach is tested on several hardware platforms. A use case scenario is presented to demonstrate its main features. The middleware represents a key component in the context of the “GHOST - Safe-Guarding Home IoT Environments with Personalised Real-time Risk Control” project.

The safety of critical cyber-physical IoT devices hinges on the security of their embedded software that implements control algorithms for monitoring and control of the associated physical processes, e.g., robotics and drones. Reverse engineering of the corresponding embedded controller software binaries enables their security analysis by extracting high-level, domain-specific, and cyber-physical execution semantic information from executables. We present MISMO, a domain-specific reverse engineering framework for embedded binary code in emerging cyber-physical IoT control application domains. The reverse engineering outcomes can be used for firmware vulnerability assessment, memory forensics analysis, targeted memory data attacks, or binary patching for dynamic selective memory protection (e.g., important control algorithm parameters). MISMO performs semantic-matching at an algorithmic level that can help with the understanding of any possible cyber-physical security flaws. MISMO compares low-level binary symbolic values and high-level algorithmic expressions to extract domain-specific semantic information for the binary's code and data. MISMO enables a finer-grained understanding of the controller by identifying the specific control and state estimation algorithms used. We evaluated MISMO on 2,263 popular firmware binaries by 30 commercial vendors from 6 application domains including drones, self-driving cars, smart homes, robotics, 3D printers, and the Linux kernel controllers. The results show that MISMO can accurately extract the algorithm-level semantics of the embedded binary code and data regions. We discovered a zero-day vulnerability in the Linux kernel controllers versions 3.13 and above.

Upon the new paradigm of Cellular Internet of Things, through the usage of technologies such as Narrowband IoT (NB-IoT), a massive amount of IoT devices will be able to use the mobile network infrastructure to perform their communications. However, it would be beneficial for these devices to use the same security mechanisms that are present in the cellular network architecture, so that their connections to the application layer could see an increase on security. As a way to approach this, an identity management and provisioning mechanism, as well as an identity federation between an IoT platform and the cellular network is proposed as a way to make an IoT device deemed worthy of using the cellular network and perform its actions.

Internet of Things is nowadays growing faster than ever before. Operators are planning or already creating dedicated networks for this type of devices. There is a need to create dedicated solutions for this type of network, especially solutions related to information security. In this article we present a mechanism of security-aware routing, which takes into account the evaluation of trust in devices and packet flows. We use trust relationships between flows and network nodes to create secure SDN paths, not ignoring also QoS and energy criteria. The system uses SDN infrastructure, enriched with Cognitive Packet Networks (CPN) mechanisms. Routing decisions are made by Random Neural Networks, trained with data fetched with Cognitive Packets. The proposed network architecture, implementing the security-by-design concept, was designed and is being implemented within the SerIoT project to demonstrate secure networks for the Internet of Things (IoT).

IoT is evolving as a combination of interconnected devices over a particular network. In the proposed paper, we discuss about the security of IoT system in the wireless devices. IoT security is the platform in which the connected devices over the network are safeguarded over internet of things framework. Wireless devices play an eminent role in this kind of networks since most of the time they are connected to the internet. Accompanied by major users cannot ensure their end to end security in the IoT environment. However, connecting these devices over the internet via using IoT increases the chance of being prone to the serious issues that may affect the system and its data if they are not protected efficiently. In the proposed paper, the security of IoT in wireless devices will be enhanced by using ECC. Since the issues related to security are becoming common these days, an attempt has been made in this proposed paper to enhance the security of IoT networks by using ECC for wireless devices.

In recent years, there is a surge of interest in approaches pertaining to security issues of Internet of Things deployments and applications that leverage machine learning and deep learning techniques. A key prerequisite for enabling such approaches is the development of scalable infrastructures for collecting and processing security-related datasets from IoT systems and devices. This paper introduces such a scalable and configurable data collection infrastructure for data-driven IoT security. It emphasizes the collection of (security) data from different elements of IoT systems, including individual devices and smart objects, edge nodes, IoT platforms, and entire clouds. The scalability of the introduced infrastructure stems from the integration of state of the art technologies for large scale data collection, streaming and storage, while its configurability relies on an extensible approach to modelling security data from a variety of IoT systems and devices. The approach enables the instantiation and deployment of security data collection systems over complex IoT deployments, which is a foundation for applying effective security analytics algorithms towards identifying threats, vulnerabilities and related attack patterns.

Cloud-assisted Internet of Vehicles (IoV)which merges the advantages of both cloud computing and Internet of Things that can provide numerous online services, and bring lots of benefits and conveniences to the connected vehicles. However, the security and privacy issues such as confidentiality, access control and driver privacy may prevent it from being widely utilized for message dissemination. Existing attribute-based message encryption schemes still bring high computational cost to the lightweight vehicles. In this paper, we introduce a secure and privacy-preserving dissemination scheme for warning message in cloud-assisted IoV. Firstly, we adopt attribute-based encryption to protect the disseminated warning message, and present a verifiable encryption and decryption outsourcing construction to reduce the computational overhead on vehicles. Secondly, we present a conditional privacy preservation mechanism which utilizes anonymous identity-based signature technique to ensure anonymous vehicle authentication and message integrity checking, and also allows the trusted authority to trace the real identity of malicious vehicle. We further achieve batch verification to improve the authentication efficiency. The analysis indicate that our scheme gains more security properties and reduces the computational overhead on the vehicles.

Industrial Control systems traditionally achieved security by using proprietary protocols to communicate in an isolated environment from the outside. This paradigm is changed with the advent of the Industrial Internet of Things that foresees flexible and interconnected systems. In this contribution, a device acting as a connection between the operational technology network and information technology network is proposed. The device is an intrusion detection system related to legacy systems that is able to collect and reporting data to and from industrial IoT devices. It is based on the common signature based intrusion detection system developed in the information technology domain, however, to cope with the constraints of the operation technology domain, it exploits anomaly based features. Specifically, it is able to analyze the traffic on the network at application layer by mean of deep packet inspection, parsing the information carried by the proprietary protocols. At a later stage, it collect and aggregate data from and to IoT domain. A simple set up is considered to prove the effectiveness of the approach.

The deployment of smart devices in IoT applications are increasing with tremendous pace causing severe security concerns, as it trade most of private information. To counter that security issues in low resource applications, lightweight cryptographic algorithms have been introduced in recent past. In this paper we propose efficient hardware architecture of piccolo lightweight algorithm uses 64 bits block size with variable key size of length 80 and 128 bits. This paper introduces novel hardware architecture of piccolo-80, to supports high speed RFID security applications. Different design strategies are there to optimize the hardware metrics trade-off for particular application. The algorithm is implemented on different family of FPGAs with different devices to analyze the performance of design in 4 input LUTs and 6 input LUTs implementations. In addition, the results of hardware design are evaluated and compared with the most relevant lightweight block ciphers, shows the proposed architecture finds its utilization in terms of speed and area optimization from the hardware resources. The increment in throughput with optimized area of this architecture suggests that piccolo can applicable to implement for ultra-lightweight applications also.

Edge computing requires a flexible choice of data-processing and rapidly computation performed at the edge of networks. We proposed an edge computing platform with container-based virtualization technology. In the platform, data-processing instances are modularized and deployed to edge nodes suitable for user requirements with keeping the data-processing flows within wide area network. This paper reports the platform controller and the process modules implemented to realize the secure and flexible edge computing platform.

This paper proposes an intelligent functional architecture for an advanced launch site system that is composed of five parts: the intelligent technical area, the intelligent launching region, the intelligent flight and landing area, the intelligent command and control system, and the intelligent analysis assessment system. The five parts consist of the infrastructure, facilities, equipment, hardware and software and thus include the whole mission processes of ground and launch systems from flight articles' entry to launch. The architectural framework is designed for the intelligent elements of the parts. The framework is also defined as the interrelationship and the interface of the elements, including the launch vehicle and flight payloads. Based on the Internet of Things (IoT), the framework is integrated on four levels: the physical layer, the perception layer, the network layer, and the application layer. The physical layer includes the physical objects and actuators of the launch site. The perception layer consists of the sensors and data processing system. The network layer supplies the access gateways and backbone network. The application layer serves application systems through the middleware platform. The core of the intelligent system is the controller of the automatic control system crossing the four layers. This study builds the models of the IoT, cloud platform, middleware, integrated access gateway, and automatic control system for actual ground and launch systems. A formal approach describes and defines the architecture, models and autonomous control flows in the paper. The defined models describe the physical objects, intelligent elements, interface relations, status transformation functions, etc. The test operation and launch processes are connected with the intelligent system model. This study has been applied to an individual mission project and achieved good results. The architecture and the models of this study regulate the relationship between the elements of the intelligent system. The study lays a foundation for the architectural construction, the simulation and the verification of the intelligent systems at the launch site.

Pervasive systems over the years continuous to grow exponentially. Engagement of IoT in fields such as Agriculture, Home automation, industrial applications etc is on the rise. Self organizing networks within the IoT field give rise to engagement of various nodes for data communication. The rise in Cyber-attacks within IoT pose a lot of threat to these connected nodes and hence there is a need for data passing through nodes to be verified during communication. In this paper we proposed a nodal authentication approach in IoT using blockchain in securing the integrity of data passing through the nodes in IoT. In our work, we engaged the GOST algorithm in our approach. At the end, we achieved a nodal authentication and verification of the transmitted data. This makes it very difficult for an attacker to fake a node in the communication chain of the connected nodes. Data integrity was achieved in the nodes during the communication.

The Internet of Things (IoT) and RFID devices are essential parts of the new information technology generation. They are mostly characterized by their limited power and computing resources. In order to ensure their security under computing and power constraints, a number of lightweight cryptography algorithms has emerged. This paper outlines the performance analysis of six lightweight blocks crypto ciphers with different structures - LED, PRESENT, HIGHT, LBlock, PICCOLO and TWINE on a LEON3 open source processor. We have implemented these crypto ciphers on the FPGA board using the C language and the LEON3 processor. Analysis of these crypto ciphers is evaluated after considering various benchmark parameters like throughput, execution time, CPU performance, AHB bandwidth, Simulator performance, and speed. These metrics are tested with different key sizes provided by each crypto algorithm.

New IoT applications are demanding for more and more performance in embedded devices while their deployment and operation poses strict power constraints. We present the security concept for a customizable Internet of Things (IoT) platform based on the RISC-V ISA and developed by several Fraunhofer Institutes. It integrates a range of peripherals with a scalable computing subsystem as a three dimensional System-in-Package (3D-SiP). The security features aim for a medium security level and target the requirements of the IoT market. Our security architecture extends given implementations to enable secure deployment, operation, and update. Core security features are secure boot, an authenticated watchdog timer, and key management. The Universal Sensor Platform (USeP) SoC is developed for GLOBALFOUNDRIES' 22FDX technology and aims to provide a platform for Small and Medium-sized Enterprises (SMEs) that typically do not have access to advanced microelectronics and integration know-how, and are therefore limited to Commercial Off-The-Shelf (COTS) products.

The Internet of Things (IoT) market is growing rapidly, allowing continuous evolution of new technologies. Alongside this development, most IoT devices are easy to compromise, as security is often not a prioritized characteristic. This paper proposes a novel IoT Security Model (IoTSM) that can be used by organizations to formulate and implement a strategy for developing end-to-end IoT security. IoTSM is grounded by the Software Assurance Maturity Model (SAMM) framework, however it expands it with new security practices and empirical data gathered from IoT practitioners. Moreover, we generalize the model into a conceptual framework. This approach allows the formal analysis for security in general and evaluates an organization's security practices. Overall, our proposed approach can help researchers, practitioners, and IoT organizations, to discourse about IoT security from an end-to-end perspective.

As Blockchain technology become more understood in recent years and its capability to solve enterprise business use cases become evident, technologist have been exploring Blockchain technology to solve use cases that have been daunting industries for years. Unlike existing technologies, one of the key features of blockchain technology is its unparalleled capability to provide, traceability, accountability and immutable records that can be accessed at any point in time. One application area of interest for blockchain is securing heterogenous networks. This paper explores the security challenges in a heterogonous network of IoT devices and whether blockchain can be a viable solution. Using an experimental approach, we explore the possibility of using blockchain technology to secure IoT devices, validate IoT device transactions, and establish a chain of trust to secure an IoT device mesh network, as well as investigate the plausibility of using immutable transactions for forensic analysis.

The Internet of Things (IoT) visualizes a massive network with billions of interaction among smart things which are capable of contributing all sorts of services. Self-configuring things (nodes) are connected dynamically with a global network in IoT scenario. The small things are widely spread in a real world paradigm with minimal processing capacity and limited storage. The recent IoT technologies have more concerns about the security, privacy and reliability. Sharing personal data over the centralized system still remains as a challenging task. If the infrastructure is able to provide the assurance for transferring the data but for now it requires special attention on security and data consistency. Because, centralized system and infrastructure is viewed as a more attractive point for hacker or cyber-attacker. To solve this we present a secured smart contract based on Blockchain to develop a secured communicative network. A Hash based secret key is used for encryption and decryption purposes. A demo attack is done for developing a better understanding on blockchain technology in terms of their comparison and calculation.

Physically Unclonable Functions (PUFs) promise to be a critical hardware primitive to provide unique identities to billions of connected devices in Internet of Things (IoTs). In traditional authentication protocols a user presents a set of credentials with an accompanying proof such as password or digital certificate. However, IoTs need more evolved methods as these classical techniques suffer from the pressing problems of password dependency and inability to bind access requests to the “things” from which they originate. Additionally, the protocols need to be lightweight and heterogeneous. Although PUFs seem promising to develop such mechanism, it puts forward an open problem of how to develop such mechanism without needing to store the secret challenge-response pair (CRP) explicitly at the verifier end. In this paper, we develop an authentication and key exchange protocol by combining the ideas of Identity based Encryption (IBE), PUFs and Key-ed Hash Function to show that this combination can help to do away with this requirement. The security of the protocol is proved formally under the Session Key Security and the Universal Composability Framework. A prototype of the protocol has been implemented to realize a secured video surveillance camera using a combination of an Intel Edison board, with a Digilent Nexys-4 FPGA board consisting of an Artix-7 FPGA, together serving as the IoT node. We show, though the stand-alone video camera can be subjected to man-in-the-middle attack via IP-spoofing using standard network penetration tools, the camera augmented with the proposed protocol resists such attacks and it suits aptly in an IoT infrastructure making the protocol deployable for the industry.

The operating system is extremely important for both "Made in China 2025" and ubiquitous electric power Internet of Things. By investigating of five key requirements for ubiquitous electric power Internet of Things at the OS level (performance, ecosystem, information security, functional security, developer framework), this paper introduces the intelligent NARI microkernel Operating System and its innovative schemes. It is implemented with microkernel architecture based on the trusted computing. Some technologies such as process based fine-grained real-time scheduling algorithm, sigma0 efficient message channel and service process binding in multicore are applied to improve system performance. For better ecological expansion, POSIX standard API is compatible, Linux container, embedded virtualization and intelligent interconnection technology are supported. Native process sandbox and mimicry defense are considered for security mechanism design. Multi-level exception handling and multidimensional partition isolation are adopted to provide High Reliability. Theorem-assisted proof tools based on Isabelle/HOL is used to verify the design and implementation of NARI microkernel OS. Developer framework including tools, kit and specification is discussed when developing both system software and user software on this IoT OS.