Biblio
Cloud computing is a solution to reduce the cost of IT by providing elastic access to shared resources. It also provides solutions for on-demand computing power and storage for devices at the edge networks with limited resources. However, increasing the number of connected devices caused by IoT architecture leads to higher network traffic and delay for cloud computing. The centralised architecture of cloud computing also makes the edge networks more susceptible to challenges in the core network. Fog computing is a solution to decrease the network traffic, delay, and increase network resilience. In this paper, we study how fog computing may improve network resilience. We also conduct a simulation to study the effect of fog computing on network traffic and delay. We conclude that using fog computing prepares the network for better response time in case of interactive requests and makes the edge networks more resilient to challenges in the core network.
Over the last years, the number of rather simple interconnected devices in nonindustrial scenarios (e.g., for home automation) has steadily increased. For ease of use, the overall system security is often neglected. Before the Internet of Things (IoT) reaches the same distribution rate and impact in industrial applications, where security is crucial for success, solutions that combine usability, scalability, and security are required. We develop such a security system, mainly targeting sensor modules equipped with Radio Frequency IDentification (RFID) tags which we leverage to increase the security level. More specifically, we consider a network based on Message Queue Telemetry Transport (MQTT) which is a widely adopted protocol for the IoT.
In this paper we discuss the Internet of Things (IoT) by exploring aspects which go beyond the proliferation of devices and information enabled by: the growth of the Internet, increased miniaturization, prolonged battery life and an IT literate user base. We highlight the role of feedback mechanisms and illustrate this with reference to implemented computer enabled factory control systems. As the technology has developed, the cost of computing has reduced drastically, programming interfaces have improved, sensors are simpler and more cost effective and high performance communications across a wide area are readily available. We illustrate this by considering an application based on the Raspberry Pi, which is a low cost, small, programmable and network capable computer based on a powerful ARM processor with a programmable I/O interface, which can provide access to sensors (and other devices). The prototype application running on this platform can sense the presence of human being, using inexpensive passive infrared detectors. This can be used to monitor the activity of vulnerable adults, logging the results to a central server using a domestic Internet solution over a Wireless LAN. Whilst this demonstrates the potential for the use of such control/monitoring systems, practical systems spanning thousands of sites will be more complex to deliver and will have more stringent data processing and management demands and security requirements. We will discuss these concepts in the context of delivery of a smart interconnected society.
The Internet of Things (IoT) connects not only computers and mobile devices, but it also interconnects smart buildings, homes, and cities, as well as electrical grids, gas, and water networks, automobiles, airplanes, etc. However, IoT applications introduce grand security challenges due to the increase in the attack surface. Current security approaches do not handle cybersecurity from a holistic point of view; hence a systematic cybersecurity mechanism needs to be adopted when designing IoTbased applications. In this work, we present a risk management framework to deploy secure IoT-based applications for Smart Infrastructures at the design time and the runtime. At the design time, we propose a risk management method that is appropriate for smart infrastructures. At the design time, our framework relies on the Anomaly Behavior Analysis (ABA) methodology enabled by the Autonomic Computing paradigm and an intrusion detection system to detect any threat that can compromise IoT infrastructures by. Our preliminary experimental results show that our framework can be used to detect threats and protect IoT premises and services.
Internet Engineering Task Force (IETF) is working on 6LoW-PAN standard which allows smart devices to be connected to Internet using large address space of IPV6. 6LoWPAN acts as a bridge between resource constrained devices and the Internet. The entire IoT space is vulnerable to local threats as well as the threats from the Internet. Due to the random deployment of the network nodes and the absence of tamper resistant shield, the resource constrained IoT elements face potential insider attacks even in presence of front line defense mechanism that involved cryptographic protocols. To detect such insidious nodes, an Intrusion Detection System (IDS) is required as a second line of defense. In this paper, we attempt to analyze such potential insider attacks, while reviewing the IDS based countermeasures. We attempt to propose a baseline for designing IDS for 6LoWPAN based IoT system.
Early Internet of Things(IoT) applications have been build around cloud-centric architectures where information generated at the edge by the "things" in conveyed and processed in a cloud infrastructure. These architectures centralise processing and decision on the data-centre assuming sufficient connectivity, bandwidth and latency. As applications of the Internet of Things extend to industrial and more demanding consumer applications, the assumptions underlying cloud-centric architectures start to be violated as for several of these applications connectivity, bandwidth and latency to the data-centre are a challenge. Fog and Mist computing have emerged as forms of "Cloud Computing" closer to the "Edge" and to the "Things" that should alleviate the connectivity, bandwidth and latency challenges faced by Industrial and extremely demanding Consumer Internet of Things Applications. This keynote, will (1) introduce Cloud, Fog and Mist Computing architectures for the Internet of Things, (2) motivate their need and explain their applicability with real-world use cases, and (3) assess their technological maturity and highlight the areas that require further academic and industrial research.
Embedded virtualization has emerged as a valuable way to reduce costs, improve software quality, and decrease design time. Additionally, virtualization can enforce the overall system's security from several perspectives. One is security due to separation, where the hypervisor ensures that one domain does not compromise the execution of other domains. At the same time, the advances in the development of IoT applications opened discussions about the security flaws that were introduced by IoT devices. In a few years, billions of these devices will be connected to the cloud exchanging information. This is an opportunity for hackers to exploit their vulnerabilities, endangering applications connected to such devices. At this point, it is inevitable to consider virtualization as a possible approach for IoT security. In this paper we discuss how embedded virtualization could take place on IoT devices as a sound solution for security.
With the advancement of Internet in Things (IoT) more and more "things" are connected to each other through the Internet. Due to the fact that the collected information may contain personal information of the users, it is very important to ensure the security of the devices in IoT. Diversification is a promising technique that protects the software and devices from harmful attacks and malware by making interfaces unique in each separate system. In this paper we apply diversification on the interfaces of IoT operating systems. To this aim, we introduce the diversification in post-compilation and linking phase of the software life-cycle, by shuffling the order of the linked objects while preserving the semantics of the code. This approach successfully prevents malicious exploits from producing adverse effects in the system. Besides shuffling, we also apply library symbol diversification method, and construct needed support for it e.g. into the dynamic loading phase. Besides studying and discussing memory layout shuffling and symbol diversification as a security measures for IoT operating systems, we provide practical implementations for these schemes for Thingsee OS and Raspbian operating systems and test these solutions to show the feasibility of diversification in IoT environments.
Internet of Things(IoT) is the next big boom in the networking field. The vision of IoT is to connect daily used objects (which have the ability of sensing and actuation) to the Internet. This may or may or may not involve human. IoT field is still maturing and has many open issues. We build up on the security issues. As the devices have low computational power and low memory the existing security mechanisms (which are a necessity) should also be optimized accordingly or a clean slate approach needs to be followed. This is a survey paper to focus on the security aspects of IoT. We further also discuss the open challenges in this field.
Security of Constrained application protocol(COAP) used instead of HTTP in Internet of Thing s(IoT) is achieved using DTLS which uses the Internet key exchange protocol for key exchange and management. In this work a novel key exchange and authentication protocol is proposed. CLIKEv2 protcol is a certificate less and light weight version of the existing protocol. The protocol design is tested with the formal protcol verification tool Scyther, where no named attacks are identified for the propsed protocol. Compared to the existing IKE protocol the CLIKEv2 protocol reduces the computation time, key sizes and ultimately reduces energy consumption.
We present new applications for cryptographic secret handshakes between mobile devices on top of Bluetooth Low-Energy (LE). Secret handshakes enable mutual authentication, with the property that the parties learn nothing about each other unless they have been both issued credentials by a group administrator. This property provides strong privacy guarantees that enable interesting applications. One of them is proximity-based discovery for private communities. We introduce MASHaBLE, a mobile application that enables participants to discover and interact with nearby users if and only if they belong to the same secret community. We use direct peer-to-peer communication over Bluetooth LE, rather than relying on a central server. We discuss the specifics of implementing secret handshakes over Bluetooth LE and present our prototype implementation.
Unease over data privacy will retard consumer acceptance of IoT deployments. The primary source of discomfort is a lack of user control over raw data that is streamed directly from sensors to the cloud. This is a direct consequence of the over-centralization of today's cloud-based IoT hub designs. We propose a solution that interposes a locally-controlled software component called a privacy mediator on every raw sensor stream. Each mediator is in the same administrative domain as the sensors whose data is being collected, and dynamically enforces the current privacy policies of the owners of the sensors or mobile users within the domain. This solution necessitates a logical point of presence for mediators within the administrative boundaries of each organization. Such points of presence are provided by cloudlets, which are small locally-administered data centers at the edge of the Internet that can support code mobility. The use of cloudlet-based mediators aligns well with natural personal and organizational boundaries of trust and responsibility.
In this paper we present Securebox, an affordable and deployable platform for securing and managing IoT networks. Our proposal targets an alarming spot in the fast growing IoT industry where security is often overlooked due to device limitation, budget constraint, and development deadline. In contrast to existing host-centric and hardware-coupled solutions, Securebox empowers a cloud-assisted "charge for network service" model that is dedicated to budget and resource constrained IoT environments. Owing to its cloud-driven and modular design, Securebox allows us to 1) flexibly offload and onload security and management functions to the cloud and network edge components; 2) offer advanced security and management services to end users in an affordable and on-demand manner; 3) ease the upgrade and deployment of new services to guard against abrupt security breakouts. To demonstrate Securebox, we have implemented the platform consisting of a plug-n-play frontend, a Kubernetes-powered backend cluster, and a smartphone mobile application. Based on the testbed evaluation, we show that Securebox is robust and responsive. Its collaborative and extensible architecture enforces rapid update cycles and can scale with the growing diversity of IoT devices.
Video surveillance, closed-circuit TV and IP-camera systems became virtually omnipresent and indispensable for many organizations, businesses, and users. Their main purpose is to provide physical security, increase safety, and prevent crime. They also became increasingly complex, comprising many communication means, embedded hardware and non-trivial firmware. However, most research to date focused mainly on the privacy aspects of such systems, and did not fully address their issues related to cyber-security in general, and visual layer (i.e., imagery semantics) attacks in particular. In this paper, we conduct a systematic review of existing and novel threats in video surveillance, closed-circuit TV and IP-camera systems based on publicly available data. The insights can then be used to better understand and identify the security and the privacy risks associated with the development, deployment and use of these systems. We study existing and novel threats, along with their existing or possible countermeasures, and summarize this knowledge into a comprehensive table that can be used in a practical way as a security checklist when assessing cyber-security level of existing or new CCTV designs and deployments. We also provide a set of recommendations and mitigations that can help improve the security and privacy levels provided by the hardware, the firmware, the network communications and the operation of video surveillance systems. We hope the findings in this paper will provide a valuable knowledge of the threat landscape that such systems are exposed to, as well as promote further research and widen the scope of this field beyond its current boundaries.
We examine the security of home smart locks: cyber-physical devices that replace traditional door locks with deadbolts that can be electronically controlled by mobile devices or the lock manufacturer's remote servers. We present two categories of attacks against smart locks and analyze the security of five commercially-available locks with respect to these attacks. Our security analysis reveals that flaws in the design, implementation, and interaction models of existing locks can be exploited by several classes of adversaries, allowing them to learn private information about users and gain unauthorized home access. To guide future development of smart locks and similar Internet of Things devices, we propose several defenses that mitigate the attacks we present. One of these defenses is a novel approach to securely and usably communicate a user's intended actions to smart locks, which we prototype and evaluate. Ultimately, our work takes a first step towards illuminating security challenges in the system design and novel functionality introduced by emerging IoT systems.
With the advent of the Internet of Things (IoT), billions of devices are expected to continuously collect and process sensitive data (e.g., location, personal health). Due to limited computational capacity available on IoT devices, the current de facto model for building IoT applications is to send the gathered data to the cloud for computation. While private cloud infrastructures for handling large amounts of data streams are expensive to build, using low cost public (untrusted) cloud infrastructures for processing continuous queries including on sensitive data leads to concerns over data confidentiality. This paper presents STYX, a novel programming abstraction and managed runtime system, that ensures confidentiality of IoT applications whilst leveraging the public cloud for continuous query processing. The key idea is to intelligently utilize partially homomorphic encryption to perform as many computationally intensive operations as possible in the untrusted cloud. STYX provides a simple abstraction to the IoT developer to hide the complexities of (1) applying complex cryptographic primitives, (2) reasoning about performance of such primitives, (3) deciding which computations can be executed in an untrusted tier, and (4) optimizing cloud resource usage. An empirical evaluation with benchmarks and case studies shows the feasibility of our approach.
The IPv6 Routing Protocol for Low-Power and Lossy Networks was recently introduced as the new routing standard for the Internet of Things. Although RPL defines basic security modes, it remains vulnerable to topological attacks which facilitate blackholing, interception, and resource exhaustion. We are concerned with analyzing the corresponding threats and protecting future RPL deployments from such attacks. Our contributions are twofold. First, we analyze the state of the art, in particular the protective scheme VeRA and present two new rank order attacks as well as extensions to mitigate them. Second, we derive and evaluate TRAIL, a generic scheme for topology authentication in RPL. TRAIL solely relies on the basic assumptions of RPL that (1) the root node serves as a trust anchor and (2) each node interconnects to the root in a straight hierarchy. Using proper reachability tests, TRAIL scalably and reliably identifies any topological attacker without strong cryptographic efforts.
Notions like security, trust, and privacy are crucial in the digital environment and in the future, with the advent of technologies like the Internet of Things (IoT) and Cyber-Physical Systems (CPS), their importance is only going to increase. Trust has different definitions, some situations rely on real-world relationships between entities while others depend on robust technologies to gain trust after deployment. In this paper we focus on these robust technologies, their evolution in past decades and their scope in the near future. The evolution of robust trust technologies has involved diverse approaches, as a consequence trust is defined, understood and ascertained differently across heterogeneous domains and technologies. In this paper we look at digital trust technologies from the point of view of security and examine how they are making secure computing an attainable reality. The paper also revisits and analyses the Trusted Platform Module (TPM), Secure Elements (SE), Hypervisors and Virtualisation, Intel TXT, Trusted Execution Environments (TEE) like GlobalPlatform TEE, Intel SGX, along with Host Card Emulation, and Encrypted Execution Environment (E3). In our analysis we focus on these technologies and their application to the emerging domains of the IoT and CPS.
The Internet of Things(IoT) has become a popular technology, and various middleware has been proposed and developed for IoT systems. However, there have been few studies on the data management of IoT systems. In this paper, we consider graph database models for the data management of IoT systems because these models can specify relationships in a straightforward manner among entities such as devices, users, and information that constructs IoT systems. However, applying a graph database to the data management of IoT systems raises issues regarding distribution and security. For the former issue, we propose graph database operations integrated with REST APIs. For the latter, we extend a graph edge property by adding access protocol permissions and checking permissions using the APIs with authentication. We present the requirements for a use case scenario in addition to the features of a distributed graph database for IoT data management to solve the aforementioned issues, and implement a prototype of the graph database.
Internet of Things (IoT) is to connect objects of different application fields, functionality and technology. These objects are entirely addressable and use standard communication protocol. Intelligent agents are used to integrate Internet of Things with heterogeneous low-power embedded resource-constrained networked devices. This paper discusses with the implemented real world scenario of smart autonomous patient management with the assistance of semantic technology in IoT. It uses the Smart Semantic framework using domain ontologies to encapsulate the processed information from sensor networks. This embedded Agent based Semantic Internet of Things in healthcare (ASIOTH) system is having semantic logic and semantic value based Information to make the system as smart and intelligent. This paper aims at explaining in detail the technology drivers behind the IoT and health care with the information on data modeling, data mapping of existing IoT data into different other associated system data, workflow or the process flow behind the technical operations of the remote device coordination, the architecture of network, middleware, databases, application services. The challenges and the associated solution in this field are discussed with the use case.
Embedded devices are becoming more widespread, interconnected, and web-enabled than ever. However, recent studies showed that embedded devices are far from being secure. Moreover, many embedded systems rely on web interfaces for user interaction or administration. Web security is still difficult and therefore the web interfaces of embedded systems represent a considerable attack surface. In this paper, we present the first fully automated framework that applies dynamic firmware analysis techniques to achieve, in a scalable manner, automated vulnerability discovery within embedded firmware images. We apply our framework to study the security of embedded web interfaces running in Commercial Off-The-Shelf (COTS) embedded devices, such as routers, DSL/cable modems, VoIP phones, IP/CCTV cameras. We introduce a methodology and implement a scalable framework for discovery of vulnerabilities in embedded web interfaces regardless of the devices' vendor, type, or architecture. To reach this goal, we perform full system emulation to achieve the execution of firmware images in a software-only environment, i.e., without involving any physical embedded devices. Then, we automatically analyze the web interfaces within the firmware using both static and dynamic analysis tools. We also present some interesting case-studies and discuss the main challenges associated with the dynamic analysis of firmware images and their web interfaces and network services. The observations we make in this paper shed light on an important aspect of embedded devices which was not previously studied at a large scale.
The Internet of Things (IoT) is an emerging architecture that seeks to interconnect all of the "things" we use on a daily basis. Whereas the Internet originated as a way to connect traditional computing devices in order to share information, IoT includes everything from automobiles to appliances to buildings. As networks and devices become more diverse and disparate in their communication methods and interfaces, traditional host-to host technologies such as Internet Protocol (IP) are challenged to provide the level of data exchange and security needed to operate in this new network paradigm. Named Data Networking (NDN) is a developing Internet architecture that can help implement the IoT paradigm in a more efficient and secure manner. This paper introduces the NDN architecture in comparison to the traditional IP-based architecture and discusses several security concepts pertaining to NDN that make this a powerful technology for implementing the Internet of Things.
Emergency evacuations during disasters minimize loss of lives and injuries. It is not surprising that emergency evacuation preparedness is mandatory for organizations in many jurisdictions. In the case of corporations, this requirement translates to considerable expenses, consisting of construction costs, equipment, recruitment, retention and training. In addition, required regular evacuation drills cause recurring expenses and loss of productivity. Any automation to assist in these drills and in actual evacuations can mean savings of costs, time and lives. Evacuation assistance systems rely on attendance systems that often fall short in accuracy, particularly in environments with lot of "non-swipers" (customers, visitors, etc.,). A critical question to answer in the case of an emergency is "How many people are still in the building?". This number is calculated by comparing the number of people gathered at assembly point to the last known number of people inside the building. An IoT based system can enhance the answer to that question by providing the number of people in the building, provide their last known locations in an automated fashion and even automate the reconciliation process. Our proposed system detects the people in the building automatically using multiple channels such as WiFi and motion detection. Such a system needs the ability to link specific identifiers to persons reliably. In this paper we present our statistics and heuristics based solutions for linking detected identifiers as belonging to an actual persons in a privacy preserving manner using IoT technologies.