Biblio

Nowadays, source location privacy in underwater acoustic sensor networks (UASNs) has gained a lot of attention. The aim of source location privacy is to use specific technologies to protect the location of the source from being compromised. Among the many technologies available are fake packet technology, multi-path routing technology and so on. The fake packet technology uses a certain amount of fake packets to mask the transmission of the source packet, affecting the adversary's efficiency of hop-by-hop backtracking to the source. However, during the operation of the fake packet technology, the fake packet, and the source packet may interfere with each other. Focus on this, a fake packet time slot assignment-based source location privacy protection (FPTSA-SLP) scheme. The time slot assignment is adopted to avoid interference with the source packet. Also, a relay node selection method based on the handshake is further proposed to increase the diversity of the routing path to confuse the adversary. Compared with the comparison algorithm, the simulation results demonstrate that the proposed scheme has a better performance in safety time.

Mobile edge computing (MEC) emerges recently to help process the computation-intensive and delay-sensitive applications of resource limited mobile devices in support of MEC servers. Due to the wireless offloading, MEC faces many security challenges, like eavesdropping and privacy leakage. The anti-eavesdropping offloading or privacy preserving offloading have been studied in existing researches. However, both eavesdropping and privacy leakage may happen in the meantime in practice. In this paper, we propose a privacy preserved secure offloading scheme aiming to minimize the energy consumption, where the location privacy, usage pattern privacy and secure transmission against the eavesdropper are jointly considered. We formulate this problem as a constrained Markov decision process (CMDP) with the constraints of secure offloading rate and pre-specified privacy level, and solve it with reinforcement learning (RL). It can be concluded from the simulation that this scheme can save the energy consumption as well as improve the privacy level and security of the mobile device compared with the benchmark scheme.

With the development of wireless sensor networks (WSNs), WSNs have been widely used in various fields such as animal habitat detection, military surveillance, etc. This paper focuses on protecting the source location privacy (SLP) in WSNs. Existing algorithms perform poorly in non-uniform networks which are common in reality. In order to address the performance degradation problem of existing algorithms in non-uniform networks, this paper proposes a robust fixed path-based random routing scheme (RFRR), which guarantees the path diversity with certainty in non-uniform networks. In RFRR, the data packets are sent by selecting a routing path that is highly differentiated from each other, which effectively protects SLP and resists the backtracking attack. The experimental results show that RFRR increases the difficulty of the backtracking attack while safekeeping the balance between security and energy consumption.

It is important to ensure source location privacy (SLP) protection in safety-critical monitoring applications. Also, to achieve effective long-term monitoring, it is essential to design SLP protocols with high energy efficiency and energy balancing. Therefore, this study proposes a new phantom with angle (PwA) protocol. The PwA protocol employs dynamic routing paths which are designed to achieve SLP protection with energy efficiency and energy balancing. Analysis results reveal that the PwA protocol exhibits superior performance features to outperform existing protocols by achieving high levels of SLP protection for time petime periods. The results confirm that the PwA protocol is practical in long-term monitoring systems.riods. The results confirm that the PwA protocol is practical in long-term monitoring systems.

In a beyond-5G (B5G) scenario, we consider a virtual private mobile network (VPMN), i.e., a set of user equipments (UEs) directly communicating in a device-to-device (D2D) fashion, and connected to the cellular network by multiple gateways. The purpose of the VPMN is to hide the position of the VPMN UEs to the mobile network operator (MNO). We investigate the design and performance of packet routing inside the VPMN. First, we note that the routing that maximizes the rate between the VPMN and the cellular network leads to an unbalanced use of the gateways by each UE. In turn, this reveals information on the location of the VPMN UEs. Therefore, we derive a routing algorithm that maximizes the VPMN rate, while imposing for each UE the same data rate at each gateway, thus hiding the location of the UE. We compare the performance of the resulting solution, assessing the location privacy achieved by the VPMN, and considering both the case of single hop and multihop in the transmissions from the UEs to the gateways.

Wireless Sensor Networks (WSNs) and their implementations have been the subject of numerous studies over the last two decades. WSN gathers, processes, and distributes wireless data to the database storage center. This study aims to explain the four main components of sensor nodes and the mechanism of WSN's. WSNs have 5 available types that will be discussed and explained in this paper. In addition to that, shortest path routing will be thoroughly analyzed. In “The Protocol”. Reconfigurable logic applications have grown in number and complexity. Shortest path routing is a method of finding paths through a network with the least distance or other cost metric. The efficiency of the shortest path protocol mechanism and the reliability of encryption are both present which adds security and accuracy of location privacy and message delivery. There are different forms of key management, such as symmetric and asymmetric encryption, each with its own set of processing techniques. The use of encryption technique to secure sensor nodes is addressed, as well as how we overcame the problem with the aid of advanced techniques. Our major findings are that adding more security doesn't cost much and by cost we mean energy consumption, throughput and latency.

In recent years, with the rise of the Internet of things industry, a variety of user location-based applications came into being. While users enjoy these convenient services, their location information privacy is also facing a great threat. Therefore, the research on location privacy protection in the Internet of things has become a hot spot for scholars. Privacy protection microdata publishing is a hot spot in data privacy protection research. Data interference is an effective solution for privacy protection microdata publishing. Aiming at privacy protection clustering problem, a privacy protection data interference method is proposed. In this paper, the location privacy protection algorithm is studied, with the purpose of providing location services and protecting the data interference of users' location privacy. In this paper, the source location privacy protection protocol (PR \_ CECRP) algorithm with controllable energy consumption is proposed to control the energy consumption of phantom routing strategy. In the routing process from the source node to the phantom node, the source data packet forwarding mechanism based on sector area division is adopted, so that the random routing path is generated and the routing energy consumption and transmission delay are effectively controlled.

With the popularization of mobile communication and sensing equipment, as well as the rapid development of location-aware technology and wireless communication technology, LBSs(Location-based services) bring convenience to people’s lives and enable people to arrange activities more efficiently and reasonably. It can provide more flexible LBS proximity detection query, which has attracted widespread attention in recent years. However, the development of proximity detection query still faces many severe challenges including query information privacy. For example, when users want to ensure their location privacy and data security, they can get more secure location-based services. In this article, we propose an efficient and privacy-protecting proximity detection framework based on location services: PD(Proximity Detection). Through PD, users can query the range of arbitrary polygons and obtain accurate LBS results. Specifically, based on homomorphic encryption technology, an efficient PRQ(polygon range query) algorithm is constructed. With the help of PRQ, PD, you can obtain accurate polygon range query results through the encryption request and the services provided by the LAS(LBS Agent Server) and the CS(Cloud Server). In addition, the query privacy of the queryer and the information of the data provider are protected. The correctness proof and performance analysis show that the scheme is safe and feasible. Therefore, our scheme is suitable for many practical applications.

Wireless sensor networks (WSNs) have gained increasing popularity in ubiquitous support of sensing system services. Often, WSNs are energy-constrained and they are deployed in harsh and unattended environments. Consequently, WSNs are vulnerable to energy and environmental factors. To ensure secure and reliable operations in safety-critical monitoring WSNs, it is important to guarantee energy-efficient communications, location privacy protection, and reliability. Fake packet-based source location privacy (SLP) protocols are known to be energy-inefficient. Therefore, in this study, we investigate the impact of energy-inefficient communications on the privacy performance of the fake packet-based SLP protocols. Experiment results show that the protocols achieve short-term and less reliable SLP protection.

The problem of maintaining the privacy of sensitive healthcare data is crucial yet the significance of research efforts achieved still need robust development in privacy protection techniques for Wireless Multimedia Sensor Networks (WMSNs). This paper aims to investigate different privacy-preserving methods for WMSNs that can be applied in healthcare, to guarantee a privacy-aware transmission of multimedia data between sensors and base stations. The combination of ant colony optimization-based routing and hierarchical structure of the network have been proposed in the AntSensNet WMSN-based routing protocol to offer QoS and power efficient multipath multimedia packet scheduling. In this paper, the AntSensNet routing protocol was extended by utilizing privacy-preserving mechanisms thus achieving anonymity / pseudonymity, unlinkability, and location privacy. The vulnerability of standard AntSensNet routing protocol to privacy threats have raised the need for the following privacy attacks’ countermeasures: (i) injection of fake traffic, which achieved anonymity, privacy of source and base locations, as well as unlinkability; (ii) encrypting and correlating the size of scalar and multimedia data which is transmitted through a WMSN, along with encrypting and correlating the size of ants, to achieve unlinkability and location privacy; (iii) pseudonyms to achieve unlinkability. The impact of these countermeasures is assessed using quantitative performance analysis conducted through simulation to gauge the overhead of the added privacy countermeasures. It can be concluded that the introduced modifications did enhance the privacy but with a penalty of increased delay and multimedia jitter. The health condition of a patient determines the vitals to be monitored which affects the volumes and sources of fake traffic. Consequently, desired privacy level will dictate incurred overhead due to multimedia transmissions and privacy measures.

Wireless sensors are often deployed in environments where it is difficult for them to discern friend from enemy. An example case is a military tactical scenario, where sensors are deployed to map the location of an item but where some of the nodes have been compromised or where there are other malicious nodes present. In this scenario, sharing data with other network nodes may present a critical security risk to the sensor nodes. Blockchain technology, with its ability to house a secure distributed ledger, offers a possible solution. However, blockchain applications for Wireless Sensor Networks suffer from poor latency in block propagation which in turn decreases throughput and network scalability. Several researchers have proposed solutions for improved network throughput. In this work, a comparison of these existing works is performed leading to a taxonomy of existing algorithms. Characteristics consistently found in algorithms reporting improved throughput are presented and, later, these characteristics are used in the development of a new algorithm for improving throughput. The proposed algorithm utilizes a proof-of- authority consensus algorithm with a node trust-based scheme. The proposed algorithm shows strong results over the base case algorithm and was evaluated with blockchain network simulations of up to 20000 nodes.

The solution of using existing WiFi devices for measurement and maintenance, and establishing a WiFi fingerprint database for precise localization has become a popular method for indoor localization. The traditional WiFi fingerprint privacy protection scheme increases the calculation amount of the client, but cannot completely protect the security of the client and the fingerprint database. In this paper, we make use of WiFi devices to present a Practical Privacy Protection Scheme In WiFi Fingerprint-based Localization PPWFL. In PPWFL, the localization server establishes a pre-partition in the fingerprint database through the E-M clustering algorithm, we divide the entire fingerprint database into several partitions. The server uses WiFi fingerprint entries with partitions as training data and trains a machine learning model. This model can accurately predict the client's partition based on fingerprint entries. The client uses the trained machine learning model to obtain its partition location accurately, picks up WiFi fingerprint entries in its partition, and calculates its geographic location with the localization server through secure multi-party computing. Compared with the traditional solution, our solution only uses the WiFi fingerprint entries in the client's partition rather than the entire fingerprint database. PPWFL can reduce not only unnecessary calculations but also avoid accidental errors (Unexpected errors in fingerprint similarity between non-adjacent locations due to multipath effects of electromagnetic waves during the propagation of complex indoor environments) in fingerprint distance calculation. In particular, due to the use of Secure Multi-Party Computation, most of the calculations are performed in the local offline phase, the client only exchanges data with the localization server during the distance calculation phase. No additional equipment is needed; our solution uses only existing WiFi devices in the building to achieve fast localization based on privacy protection. We prove that PPWFL is secure under the honest but curious attacker. Experiments show that PPWFL achieves efficiency and accuracy than the traditional WiFi fingerprint localization scheme.

The position information leakage of under-water sensor networks has been widely concerned. However, the underwater environment has unique characteristics compared with the terrestrial environment, for example, the asynchronous clock, stratification compensation. Therefore, the privacy preserving localization algorithm for terrestrial is not suitable. At present, the proposed privacy preserving localization algorithm is at the cost of reducing the localization accuracy and increasing the complexity of the algorithm. In this paper, a privacy preserving localization algorithm for underwater sensor networks with ray compensation is proposed. Besides, the localization algorithm we designed hides the position information of anchor nodes, and eliminates the influence of asynchronous clock. More importantly, the positioning accuracy is improved. Finally, the simulation results show that the location algorithm with privacy preserving and without privacy preserving have the same location accuracy. In addition, the algorithm proposed in this paper greatly improves the positioning accuracy compared with the existing work.

Wireless sensor networks (WSNs) have been widely used in various applications for continuous event monitoring and detection. Dual to lack of a protected physical boundary, WSNs are vulnerable to trace-back attacks. The existing secure routing protocols are designed to protect source location privacy by increasing uncertainty of routing direction against statistic analysis on traffic flow. Nevertheless, the security has not been quantitatively measured and shown the direction of secure routing design. In this paper, we propose a theoretical security measurement scheme to define and analyze the quantitative amount of the information leakage from each eavesdropped message. Through the theoretical analysis, we identify vulnerabilities of existing routing algorithms and quantitatively compute the direction information leakage based on various routing strategy. The theoretical analysis results also indicate the direction for maximization of source location privacy.

Source location privacy (SLP) protection ensures security of assets in monitoring wireless sensor networks (WSNs). Also, low end-to-end delay (EED) and high packet delivery ratio (PDR) guarantee high packet delivery reliability. Therefore, it is important to ensure high levels of SLP protection, low EED, and high PDR in mission-critical monitoring applications. Thus, this study proposes a new angle-based agent node routing protocol (APr) which is capable of achieving high levels of SLP protection, low EED, and high PDR. The proposed APr protocol employs multiple routing strategies to enable a dynamic agent node selection process and creation of obfuscating routing paths. Analysis results reveal that the APr protocol achieves high packet delivery reliability to outperform existing intermediate node-based protocols such as the AdrR and tree-based protocols such as the TbR. Furthermore, the APr protocol achieves significantly high levels of SLP protection to outperform the AdrR protocol.

Fake source packet routing protocols can ensure Source Location Privacy (SLP) protection. However, the protocols have demonstrated some performance limitations including high energy consumption, low packet delivery ratio (PDR), and long end-to-end delay (EED). In this study, a 2-level phantom routing protocol is proposed to address some limitations of an existing fake source packet routing protocol. The proposed protocol supplants the fake source packets with a random second level phantom node to alleviate the limitations. Analysis results confirm that the proposed protocol is capable of achieving strong SLP protection with minimized communication overhead. By removing the fake packet traffic in the network, the protocol incurs minimized energy consumption, maximized PDR, and minimized EED.

Future wearable devices are expected to increasingly exchange their positioning information with various Location-Based Services (LBSs). Wearable applications can include activity-based health and fitness recommendations, location-based social networking, location-based gamification, among many others. With the growing opportunities for LBSs, it is expected that location privacy concerns will also increase significantly. Particularly, in opportunistic wireless networks based on device-to-device (D2D) connectivity, a user can request a higher level of control over own location privacy, which may result in more flexible permissions granted to wearable devices. This translates into the ability to perform location obfuscation to the desired degree when interacting with other wearables or service providers across the network. In this paper, we argue that specific errors in the disclosed location information feature two components: a measurement error inherent to the localization algorithm used by a wearable device and an intentional (or obfuscation) error that may be based on a trade-off between a particular LBS and a desired location privacy level. This work aims to study the trade-off between positioning accuracy and location information privacy in densely crowded scenarios by introducing two privacy-centric metrics.

Wireless Sensor Networks promises the wireless network tools that does not require any stable infrastructure. Routing is the most important effect of network operation for the extended data rates within the network. Route discovery and route search sent the required packets from the target node source. However, good data transmission is also a threatening task in networks that provide efficient and energy-efficient routing. Various research activities focus on the topology control, source location privacy optimization and effective routing improvement in WSN. Wherein the existing security solutions both routing protocols and source location solutions disrupt the self-organizing nature of wireless sensor networks. Therefore, large overhead signatures are displayed and digitally verified by the requesting node. The cloud-based and routing based schemes have provided efficient security but there are a lot of obstacles for source data and travel path information security in the WSN network. This study is dedicated to calculate the desired number of deployments for sensor nodes in a given area once the selected metric achieves a certain level of coverage, while maintaining wireless connectivity in the network. A trusted node authentication scheme in wireless sensor network reduces the communication between nodes in a secure data transmission network, where shared cryptography is established all adjacent to the sensor node. Route discovery and retransmission increases the network overhead and increases the average end-to-end delay of the network in the conventional systems. This results in higher time complexity, communication overhead and less security of constrained sensor network resources.

One of the most important information in Wireless Sensor Networks (WSNs) is the location of each sensor node. This kind of information is very attractive to attackers for real position exposure of nodes making the whole network vulnerable to different kinds of attacks. According to WSNs privacy, there are two types of threats affect the network: Contextual and Content privacy. In this work, we study contextual privacy, where an eavesdropper tries to find the location of the source or sink node. We propose a Multi-Sinks Cluster-Based Location Privacy Protection (MSCLP) scheme in WSNs that divides the WSN into clusters, each cluster managed by one cluster head (CH). Each CH sends random fake packets in a loop then sends the real packet to the neighbor's CHs using a dynamic routing method to confuse the attacker from tracing back the real packet to reveal the actual location of the source node, we are taking in our consideration two important metrics: the energy consumption, and the delay.

The usage of K-anonymity to preserve location privacy for wireless sensor network (WSN) monitoring systems, where sensor nodes operate together to notify a server with anonymous shared positions. That k-anonymous position is a coated region with at least k people. However, we identify an attack model to show that overlapping aggregate locations remain privacy-risk because the enemy can infer certain overlapping areas with persons under k who violate the privacy requirement for anonymity. Within this paper we suggest a mutual WSN privacy protocol (REAL). Actual needs sensor nodes to arrange their sensing areas separately into a variety of non-overlapping, extremely precise anonymous aggregate positions. We also developed a state transfer framework, a locking mechanism and a time delay mechanism to address the three main REAL challenges, namely self-organisation, shared assets and high precision. We equate REAL's output with current protocols through virtual experiments. The findings demonstrate that REAL preserves the privacy of sites, offers more precise question answers and decreases connectivity and device expense.

Location privacy is one of most frequently discussed terms in the mobile devices security breaches and data leaks. With the expected growth of the number of IoT devices, which is 20 billions by 2020., location privacy issues will be further brought to focus. In this paper we give an overview of location privacy implications in wireless networks, mainly focusing on user's Preferred Network List (list of previously used WiFi Access Points) contained within WiFi Probe Request packets. We will showcase the existing work and suggest interesting topics for future work. A chronological overview of sensitive location data we collected on a musical festival in years 2014, 2015, 2017 and 2018 is provided. We conclude that using passive WiFi monitoring scans produces different results through years, with a significant increase in the usage of a more secure Broadcast Probe Request packets and MAC address randomizations by the smartphone operating systems.

Network lifetime and energy consumption of sensor nodes have an inversely proportional relationship. Thus, it is important to ensure source location privacy (SLP) routing schemes are energy-efficient. This work performs an experimental evaluation of some existing routing schemes and proposes a new angle-based routing algorithm to modify the schemes. The dynamic route creation process of the modified schemes is characterized by processes which include determination of route and banned regions and computation of control angle and lead factor parameters. Results of the analysis show that the modified schemes are effective at obfuscating the adversaries to provide strong SLP protection. Furthermore, the modified schemes consume relatively lower energy and guarantee longer network lifetime.

In many applications, source nodes send the sensing information of the monitored objects and the sinks receive the transmitted data. Considering the limited resources of sensor nodes, location privacy preservation becomes an important issue. Although many schemes are proposed to preserve source or sink location security, few schemes can preserve the location security of source nodes and sinks. In order to solve this problem, we propose a novel of multi-branch source location privacy protection method based on random walk. This method hides the location of real source nodes by setting multiple proxy sources. And multiple neighbors are randomly selected by the real source node as receivers until a proxy source receives the packet. In addition, the proxy source is chosen randomly, which can prevent the attacker from obtaining the location-related data of the real source node. At the same time, the scheme sets up a branch interference area around the base station to interfere with the adversary by increasing routing branches. Simulation results describe that our scheme can efficiently protect source and sink location privacy, reduce the communication overhead, and prolong the network lifetime.

Underwater sensor networks (UWSN) are a division of classical wireless sensor networks (WSN), which are designed to accomplish both military and civil operations, such as invasion detection and underwater life monitoring. Underwater sensor nodes operate using the energy provided by integrated limited batteries, and it is a serious challenge to replace the battery under the water especially in harsh conditions with a high number of sensor nodes. Here, energy efficiency confronts as a very important issue. Besides energy efficiency, data privacy is another essential topic since UWSN typically generate delicate sensing data. UWSN can be vulnerable to silent positioning and listening, which is injecting similar adversary nodes into close locations to the network to sniff transmitted data. In this paper, we discuss the usage of compressive sensing (CS) and energy harvesting (EH) to improve the lifetime of the network whilst we suggest a novel encryption decision method to maintain privacy of UWSN. We also deploy a Mixed Integer Programming (MIP) model to optimize the encryption decision cases which leads to an improved network lifetime.

As more devices become connected to the internet and new technologies emerge to connect them, security must keep up to protect data during transmission and at rest. Several instances of security breaches have forced many companies to investigate the effectiveness of their security measures. In this paper, we discuss different methodologies for protecting data as it relates to wireless sensor networks (WSNs). Data collected from these sensors range in type from location data of an individual to surveillance for military applications. We propose a solution that protects the location of the base station and the nodes while transmitting data.