Biblio

Smart Grid is a major element of the Smart City concept that enables two-way communication of energy data between electric utilities and their consumers. These communication technologies are going through sharp modernization to meet future demand growth and to achieve reliability, security, and efficiency of the electric grid. In this paper, we implement an IPv6 based two-way communication system between the transformer agent (TA), installed at local electric transformer and various customer agents (CAs), connected to customer's smart meter. Various homes share their energy usage with the TA which in turn sends the utility's recommendations to the CAs. Raspberry Pi is used as hardware for all the CAs and the TA. We implement a self-healing mesh network between all nodes using OpenLab IEEE 802.15.4 chips and Routing Protocol for Low-Power and Lossy Networks (RPL), and the data is secured by RSA/AES keys. Several tests have been conducted in real environments, inside and outside of Carleton University, to test the performance of this communication network in various obstacle settings. In this paper, we highlight the details behind the implementation of this IPv6-based smart grid communication system, the related challenges, and the proposed solutions.

In recent years, IPv6 will gradually replace IPv4 with IPv4 address exhaustion and the rapid development of the Low-Power Wide-Area network (LPWAN) wireless communication technology. This paper proposes a data acquisition and application system based on 6LoWPAN and IPv6 transition technology. The system uses 6LoWPAN and 6to4 tunnel to realize integration of the internal sensor network and Internet to improve the adaptability of the gateway and reduce the average forwarding delay and packet loss rate of small data packet. Moreover, we design and implement the functions of device access management, multiservice data storage and affair data service by combining the C/S architecture with the actual uploaded river quality data. The system has the advantages of flexible networking, low power consumption, rich IPv6 address, high communication security, and strong reusability.

Security research has made extensive use of exhaustive Internet-wide scans over the recent years, as they can provide significant insights into the overall state of security of the Internet, and ZMap made scanning the entire IPv4 address space practical. However, the IPv4 address space is exhausted, and a switch to IPv6, the only accepted long-term solution, is inevitable. In turn, to better understand the security of devices connected to the Internet, including in particular Internet of Things devices, it is imperative to include IPv6 addresses in security evaluations and scans. Unfortunately, it is practically infeasible to iterate through the entire IPv6 address space, as it is 2ˆ96 times larger than the IPv4 address space. Therefore, enumeration of active hosts prior to scanning is necessary. Without it, we will be unable to investigate the overall security of Internet-connected devices in the future. In this paper, we introduce a novel technique to enumerate an active part of the IPv6 address space by walking DNSSEC-signed IPv6 reverse zones. Subsequently, by scanning the enumerated addresses, we uncover significant security problems: the exposure of sensitive data, and incorrectly controlled access to hosts, such as access to routing infrastructure via administrative interfaces, all of which were accessible via IPv6. Furthermore, from our analysis of the differences between accessing dual-stack hosts via IPv6 and IPv4, we hypothesize that the root cause is that machines automatically and by default take on globally routable IPv6 addresses. This is a practice that the affected system administrators appear unaware of, as the respective services are almost always properly protected from unauthorized access via IPv4. Our findings indicate (i) that enumerating active IPv6 hosts is practical without a preferential network position contrary to common belief, (ii) that the security of active IPv6 hosts is currently still lagging behind the security state of IPv4 hosts, and (iii) that unintended IPv6 connectivity is a major security issue for unaware system administrators.

The existing research on the Internet of Things(IoT) security mainly focuses on attack and defense on a single protocol layer. Increasing and ubiquitous use of loT also makes it vulnerable to many attacks. An attacker try to performs the intelligent, brutal and stealthy attack that can reduce the risk of being detected. In these kinds of attacks, the attackers not only restrict themselves to a single layer of protocol stack but they also try to decrease the network performance and throughput by a simultaneous and coordinated attack on different layers. A new class of attacks, termed as cross-layer attack became prominent due to lack of interaction between MAC, routing and upper layers. These attacks achieve the better effect with reduced cost. Research has been done on cross-layer attacks in other domains like Cognitive Radio Network(CRN), Wireless Sensor Networks(WSN) and ad-hoc networks. However, our proposed scheme of cross-layer attack in IoT is the first paper to the best of our knowledge. In this paper, we have proposed Rank Manipulation and Drop Delay(RMDD) cross-layer attack in loT, we have investigated how small intensity attack on Routing protocol for low power lossy networks (RPL) degrades the overall application throughput. We have exploited the Rank system of the RPL protocol to implement the attacks. Rank is given to each node in the graph, and it shows its position in the network. If the rank could be manipulated in some manner, then the network topology can be modified. Simulation results demonstrate that the proposed attacks degrade network performance very much in terms of the throughput, latency, and connectivity.

With the transition from IPv4 IPv6 protocol to improve network communications, there are concerns about devices and applications' security that must be dealt at the beginning of implementation or during its lifecycle. Automate the vulnerability assessment process reduces management overhead, enabling better management of risks and control of the vulnerabilities. Consequently, it reduces the effort needed for each test and it allows the increase of the frequency of application, improving time management to perform all the other complicated tasks necessary to support a secure network. There are several researchers involved in tests of vulnerability in IPv6 networks, exploiting addressing mechanisms, extension headers, fragmentation, tunnelling or dual-stack networks (using both IPv4 and IPv6 at the same time). Most existing tools use the programming languages C, Java, and Python instead of a language designed specifically to create a suite of tests, which reduces maintainability and extensibility of the tests. This paper presents a solution for IPv6 vulnerabilities scan tests, based on attack simulations, combining passive analysis (observing the manifestation of behaviours of the system under test) and an active one (stimulating the system to become symptomatic). Also, it describes a prototype that simulates and detects denial-of-service attacks on the ICMPv6 Protocol from IPv6. Also, a detailed report is created with the identified vulnerability and the possible existing solutions to mitigate such a gap, thus assisting the process of vulnerability management.

In recent years the use of wireless ad hoc networks has seen an increase of applications. A big part of the research has focused on Mobile Ad Hoc Networks (MAnETs), due to its implementations in vehicular networks, battlefield communications, among others. These peer-to-peer networks usually test novel communications protocols, but leave out the network security part. A wide range of attacks can happen as in wired networks, some of them being more damaging in MANETs. Because of the characteristics of these networks, conventional methods for detection of attack traffic are ineffective. Intrusion Detection Systems (IDSs) are constructed on various detection techniques, but one of the most important is anomaly detection. IDSs based only in past attacks signatures are less effective, even more if these IDSs are centralized. Our work focuses on adding a novel Machine Learning technique to the detection engine, which recognizes attack traffic in an online way (not to store and analyze after), re-writing IDS rules on the fly. Experiments were done using the Dockemu emulation tool with Linux Containers, IPv6 and OLSR as routing protocol, leading to promising results.

Destination IP prefix-based routing protocols are core to Internet routing today. Internet autonomous systems (AS) possess fixed IP prefixes, while packets carry the intended destination AS's prefix in their headers, in clear text. As a result, network communications can be easily identified using IP addresses and become targets of a wide variety of attacks, such as DNS/IP filtering, distributed Denial-of-Service (DDoS) attacks, man-in-the-middle (MITM) attacks, etc. In this work, we explore an alternative network architecture that fundamentally removes such vulnerabilities by disassociating the relationship between IP prefixes and destination networks, and by allowing any end-to-end communication session to have dynamic, short-lived, and pseudo-random IP addresses drawn from a range of IP prefixes rather than one. The concept is seemingly impossible to realize in todays Internet. We demonstrate how this is doable today with three different strategies using software defined networking (SDN), and how this can be done at scale to transform the Internet addressing and routing paradigms with the novel concept of a distributed software defined Internet exchange (SDX). The solution works with both IPv4 and IPv6, whereas the latter provides higher degrees of IP addressing freedom. Prototypes based on Open vSwitches (OVS) have been implemented for experimentation across the PEERING BGP testbed. The SDX solution not only provides a technically sustainable pathway towards large-scale traffic analysis resistant network (TARN) support, it also unveils a new business model for customer-driven, customizable and trustable end-to-end network services.

Recently, cellular operators have started migrating to IPv6 in response to the increasing demand for IP addresses. With the introduction of IPv6, cellular middleboxes, such as firewalls for preventing malicious traffic from the Internet and stateful NAT64 boxes for providing backward compatibility with legacy IPv4 services, have become crucial to maintain stability of cellular networks. This paper presents security problems of the currently deployed IPv6 middleboxes of five major operators. To this end, we first investigate several key features of the current IPv6 deployment that can harm the safety of a cellular network as well as its customers. These features combined with the currently deployed IPv6 middlebox allow an adversary to launch six different attacks. First, firewalls in IPv6 cellular networks fail to block incoming packets properly. Thus, an adversary could fingerprint cellular devices with scanning, and further, she could launch denial-of-service or over-billing attacks. Second, vulnerabilities in the stateful NAT64 box, a middlebox that maps an IPv6 address to an IPv4 address (and vice versa), allow an adversary to launch three different attacks: 1) NAT overflow attack that allows an adversary to overflow the NAT resources, 2) NAT wiping attack that removes active NAT mappings by exploiting the lack of TCP sequence number verification of firewalls, and 3) NAT bricking attack that targets services adopting IP-based blacklisting by preventing the shared external IPv4 address from accessing the service. We confirmed the feasibility of these attacks with an empirical analysis. We also propose effective countermeasures for each attack.

The concept of Extension Headers, newly introduced with IPv6, is elusive and enables new types of threats in the Internet. Simply dropping all traffic containing any Extension Header - a current practice by operators-seemingly is an effective solution, but at the cost of possibly dropping legitimate traffic as well. To determine whether threats indeed occur, and evaluate the actual nature of the traffic, measurement solutions need to be adapted. By implementing these specific parsing capabilities in flow exporters and performing measurements on two different production networks, we show it is feasible to quantify the metrics directly related to these threats, and thus allow for monitoring and detection. Analysing the traffic that is hidden behind Extension Headers, we find mostly benign traffic that directly affects end-user QoE: simply dropping all traffic containing Extension Headers is thus a bad practice with more consequences than operators might be aware of.

The Department of Homeland Security Cyber Security Division (CSD) chose Moving Target Defense as one of the fourteen primary Technical Topic Areas pertinent to securing federal networks and the larger Internet. Moving Target Defense over IPv6 (MT6D) employs an obscuration technique offering keyed access to hosts at a network level without altering existing network infrastructure. This is accomplished through cryptographic dynamic addressing, whereby a new network address is bound to an interface every few seconds in a coordinated manner. The goal of this research is to produce a Register Transfer Level (RTL) network security processor implementation to enable the production of an Application Specific Integrated Circuit (ASIC) variant of MT6D processor for wide deployment. RTL development is challenging in that it must provide system level functions that are normally provided by the Operating System's kernel and supported libraries. This paper presents the architectural design of a hardware engine for MT6D (HE-MT6D) and is complete in simulation. Unique contributions are an inline stream-based network packet processor with a Complex Instruction Set Computer (CISC) architecture, Network Time Protocol listener, and theoretical increased performance over previous software implementations.

The interconnectivity of 6LoWPAN networks with the Internet raises serious security concerns, as constrained 6LoWPAN devices are accessible anywhere from the untrusted global Internet. Also, 6LoWPAN devices are mostly deployed in unattended environments, hence easy to capture and clone. Despite that state of the art crypto solutions provide information security, IPv6 enabled smart objects are vulnerable to attacks from outside and inside 6LoWPAN networks that are aimed to disrupt networks. This paper attempts to identify intrusions aimed to disrupt the Routing Protocol for Low-Power and Lossy Networks (RPL).In order to improve the security within 6LoWPAN networks, we extend SVELTE, an intrusion detection system for the Internet of Things, with an intrusion detection module that uses the ETX (Expected Transmissions) metric. In RPL, ETX is a link reliability metric and monitoring the ETX value can prevent an intruder from actively engaging 6LoWPAN nodes in malicious activities. We also propose geographic hints to identify malicious nodes that conduct attacks against ETX-based networks. We implement these extensions in the Contiki OS and evaluate them using the Cooja simulator.

The rapid deployment of IoT systems on the public Internet is not without concerns for the security and privacy of consumers. Security in IoT systems is often poorly engineered and engineering for privacy does notseemtobea concern for vendors at all. Thecombination of poor security hygiene and access to valuable knowledge renders IoT systems a much-sought target for attacks. IoT systems are not only Internet-accessible but also play the role of servers according to the established client-server communication model and are thus configured with static and/or easily predictable IPv6 addresses, rendering them an easy target for attacks. We present 6HOP, a novel addressing scheme for IoT devices. Our proposal is lightweight in operation, requires minimal administration overhead, and defends against reconnaissance attacks, address based correlation as well as denial-of-service attacks. 6HOP therefore exploits the ample address space available in IPv6 networks and provides effective protection this way.

Fast IPv4 scanning has enabled researchers to answer a wealth of new security and measurement questions. However, while increased network speeds and computational power have enabled comprehensive scans of the IPv4 address space, a brute-force approach does not scale to IPv6. Systems are limited to scanning a small fraction of the IPv6 address space and require an algorithmic approach to determine a small set of candidate addresses to probe. In this paper, we first explore the considerations that guide designing such algorithms. We introduce a new approach that identifies dense address space regions from a set of known "seed" addresses and generates a set of candidates to scan. We compare our algorithm 6Gen against Entropy/IP—the current state of the art—finding that we can recover between 1–8 times as many addresses for the five candidate datasets considered in the prior work. However, during our analysis, we uncover widespread IP aliasing in IPv6 networks. We discuss its effect on target generation and explore preliminary approaches for detecting aliased regions.

This work presents the proof of concept implementation for the first hardware-based design of Moving Target Defense over IPv6 (MT6D) in full Register Transfer Level (RTL) logic, with future sights on an embedded Application-Specified Integrated Circuit (ASIC) implementation. Contributions are an IEEE 802.3 Ethernet stream-based in-line network packet processor with a specialized Complex Instruction Set Computer (CISC) instruction set architecture, RTL-based Network Time Protocol v4 synchronization, and a modular crypto engine. Traditional static network addressing allows attackers the incredible advantage of taking time to plan and execute attacks against a network. To counter, MT6D provides a network host obfuscation technique that offers network-based keyed access to specific hosts without altering existing network infrastructure and is an excellent technique for protecting the Internet of Things, IPv6 over Low Power Wireless Personal Area Networks, and high value globally routable IPv6 interfaces. This is done by crypto-graphically altering IPv6 network addresses every few seconds in a synchronous manner at all endpoints. A border gateway device can be used to intercept select packets to unobtrusively perform this action. Software driven implementations have posed many challenges, namely, constant code maintenance to remain compliant with all library and kernel dependencies, the need for a host computing platform, and less than optimal throughput. This work seeks to overcome these challenges in a lightweight system to be developed for practical wide deployment.

We discuss a key engineering challenge in implementing the Identifier- Locator Network Protocol (ILNP), as described in IRTF Experimental RFCs 6740–6748: enabling legacy applications that use the C sockets API. We have built the first two OS kernel implementations of ILNPv6 (ILNP as a superset of IPv6), in both the Linux OS kernel and the FreeBSD OS kernel. Our evaluation is in comparison with IPv6, in the context of a topical and challenging scenario: host mobility implemented as a purely end-to-end function. Our experiments show that ILNPv6 has excellent potential for deployment using existing IPv6 infrastructure, whilst offering the new properties and functionality of ILNP.

The IETF has developed protocols that promote a healthy IPv4 and IPv6 co-existence. The Happy Eyeballs (HE) algorithm, for instance, prevents bad user experience in situations where IPv6 connectivity is broken. Using an active test (happy) that measures TCP connection establishment times, we evaluate the effects of the HE algorithm. The happy test measures against ALEXA top 10K websites from 80 SamKnows probes connected to dual-stacked networks representing 58 different ASes. Using a 3-years long (2013 - 2016) dataset, we show that TCP connect times to popular websites over IPv6 have considerably improved over time. As of May 2016, 18% of these websites are faster over IPv6 with 91% of the rest at most 1 ms slower. The historical trend shows that only around 1% of the TCP connect times over IPv6 were ever above the HE timer value (300 ms), which leaves around 2% chance for IPv4 to win a HE race towards these websites. As such, 99% of these websites prefer IPv6 connections more than 98% of the time. We show that although absolute TCP connect times (in ms) are not that far apart in both address families, HE with a 300 ms timer value tends to prefer slower IPv6 connections in around 90% of the cases. We show that lowering the HE timer value to 150 ms gives us a margin benefit of 10% while retaining same preference levels over IPv6.

Millions of users worldwide resort to mobile VPN clients to either circumvent censorship or to access geo-blocked content, and more generally for privacy and security purposes. In practice, however, users have little if any guarantees about the corresponding security and privacy settings, and perhaps no practical knowledge about the entities accessing their mobile traffic. In this paper we provide a first comprehensive analysis of 283 Android apps that use the Android VPN permission, which we extracted from a corpus of more than 1.4 million apps on the Google Play store. We perform a number of passive and active measurements designed to investigate a wide range of security and privacy features and to study the behavior of each VPN-based app. Our analysis includes investigation of possible malware presence, third-party library embedding, and traffic manipulation, as well as gauging user perception of the security and privacy of such apps. Our experiments reveal several instances of VPN apps that expose users to serious privacy and security vulnerabilities, such as use of insecure VPN tunneling protocols, as well as IPv6 and DNS traffic leakage. We also report on a number of apps actively performing TLS interception. Of particular concern are instances of apps that inject JavaScript programs for tracking, advertising, and for redirecting e-commerce traffic to external partners.

In today's enterprise networks, there are many ways for a determined attacker to obtain a foothold, bypass current protection technologies, and attack the intended target. Over several years we have developed the Self-shielding Dynamic Network Architecture (SDNA) technology, which prevents an attacker from targeting, entering, or spreading through an enterprise network by adding dynamics that present a changing view of the network over space and time. SDNA was developed with the support of government sponsored research and development and corporate internal resources. The SDNA technology was purchased by Cryptonite, LLC in 2015 and has been developed into a robust product offering called Cryptonite NXT. In this paper, we describe the journey and lessons learned along the course of feasibility demonstration, technology development, security testing, productization, and deployment in a production network.

In this paper, we introduce Entropy/IP: a system that discovers Internet address structure based on analyses of a subset of IPv6 addresses known to be active, i.e., training data, gleaned by readily available passive and active means. The system is completely automated and employs a combination of information-theoretic and machine learning techniques to probabilistically model IPv6 addresses. We present results showing that our system is effective in exposing structural characteristics of portions of the active IPv6 Internet address space, populated by clients, services, and routers. In addition to visualizing the address structure for exploration, the system uses its models to generate candidate addresses for scanning. For each of 15 evaluated datasets, we train on 1K addresses and generate 1M candidates for scanning. We achieve some success in 14 datasets, finding up to 40% of the generated addresses to be active. In 11 of these datasets, we find active network identifiers (e.g., /64 prefixes or "subnets") not seen in training. Thus, we provide the first evidence that it is practical to discover subnets and hosts by scanning probabilistically selected areas of the IPv6 address space not known to contain active hosts a priori.

With the rapid increasing IPv6 network traffic, some network process systems like DPI and firewall cannot meet the demand of high network bandwidth. Flow table based on hash is one of the bottlenecks. In this paper, we measure the characteristics of IPv6 address and propose an entropy based revision hash algorithm, which can produce a better distribution within acceptable time. Moreover, we use a hierarchical hash strategy to reduce hash table lookup times further more even in extreme cases.

Standard routing protocols for IPv6 over Low power Wireless Personal Area Networks (6LoWPAN) are mainly designed for data collection applications and work by establishing a tree-based network topology, which enables packets to be sent upwards, from the leaves to the root, adapting to dynamics of low-power communication links. The routing tables in such unidirectional networks are very simple and small since each node just needs to maintain the address of its parent in the tree, providing the best-quality route at every moment. In this work, we propose Matrix, a platform-independent routing protocol that utilizes the existing tree structure of the network to enable reliable and efficient any-to-any data traffic. Matrix uses hierarchical IPv6 address assignment in order to optimize routing table size, while preserving bidirectional routing. Moreover, it uses a local broadcast mechanism to forward messages to the right subtree when persistent node or link failures occur. We implemented Matrix on TinyOS and evaluated its performance both analytically and through simulations on TOSSIM. Our results show that the proposed protocol is superior to available protocols for 6LoWPAN, when it comes to any-to-any data communication, in terms of reliability, message efficiency, and memory footprint.

In the near future, billions of new smart devices will connect the big network of the Internet of Things, playing an important key role in our daily life. Allowing IPv6 on the low-power resource constrained devices will lead research to focus on novel approaches that aim to improve the efficiency, security and performance of the 6LoWPAN adaptation layer. This work in progress paper proposes a hardware-based Network Packet Filtering (NPF) and an IPv6 Link-local address calculator which is able to filter the received IPv6 packets, offering nearly 18% overhead reduction. The goal is to obtain a System-on-Chip implementation that can be deployed in future IEEE 802.15.4 radio modules.

Moving target defense is an area of network security research in which machines are moved logically around a network in order to avoid detection. This is done by leveraging the immense size of the IPv6 address space and the statistical improbability of two machines selecting the same IPv6 address. This defensive technique forces a malicious actor to focus on the reconnaissance phase of their attack rather than focusing only on finding holes in a machine's static defenses. We have a current implementation of an IPv6 moving target defense entitled MT6D, which works well although is limited to functioning in a peer to peer scenario. As we push our research forward into client server networks, we must discover what the limits are in reference to the client server ratio. In our current implementation of a simple UDP echo server that binds large numbers of IPv6 addresses to the ethernet interface, we discover limits in both the number of addresses that we can successfully bind to an interface and the speed at which UDP requests can be successfully handled across a large number of bound interfaces.
 

Future networks may change the way how network administrators monitor and account their users. History shows that usually a completely new design (clean slate) is used to propose a new network architecture - e.g. Network Control Protocol to TCP/IP, IPv4 to IPv6 or IP to Recursive Inter Network Architecture. The incompatibility between these architectures changes the user accounting process as network administrators have to use different information to identify a user. The paper presents a methodology how it is possible to gather all necessary information needed for smooth transition between two incompatible architectures. The transition from IPv4 and IPv6 is used as a use case, but it should be able to use the same process with any new networking architecture.