Biblio

In recent years, mobile social networks (MSNs) have developed rapidly and their application fields are becoming more and more widespread. Due to the continuous movement of nodes in mobile social networks, the network topology is very unstable. How to ensure the credibility of network communication is a subject worth studying. In this paper, based on the characteristics of mobile social networks, the definition of trust level is introduced into the DSR routing protocol, and a trusted DSR routing mechanism (TDR) is proposed. The scheme combines the sliding window model to design the calculation method of trust level between nodes and path trust level. The nodes in the network participate in the routing process according to their trust level. When the source node receives multiple routes carried by the response, the appropriate trusted path is selected according to the path trust level. Through simulation analysis, compared with the original DSR protocol, the TDR protocol improves the performance of average delay, route cost and packet delivery fraction, and verifies the reliability and credibility of the TDR protocol.

The Internet of Things (IoT) is an emerging technology that plays a vital role in interconnecting various objects into a network to provide desired services within its resource constrained characteristics. In IoT, the Routing Protocol for Low power and Lossy network (RPL) is the standardized proactive routing protocol that achieves satisfying resource consumption, but it does not consider the node's routing behavior for forwarding data packets. The malicious intruders exploit these loopholes for launching various forms of routing attacks. Different security mechanisms have been introduced for detecting these attacks singly. However, the launch of multiple attacks such as Rank attack and Sybil attacks simultaneously in the IoT network is one of the devastating and destructive situations. This problem can be solved by establishing secure routing with trustworthy nodes. The trustworthiness of the nodes is determined using trust evaluation methods, where the parameters considered are based on the factors that influence in detecting the attacks. In this work, Providing Routing Security using the Technique of Collective Trust (PROTECT) mechanism is introduced, and it aims to provide a secure RPL routing by simultaneously detecting both Rank and Sybil attacks in the network. The advantage of the proposed scheme is highlighted by comparing its performance with the performance of the Sec-Trust protocol in terms of detection accuracy, energy consumption, and throughput.

With features such as decentralization, consistency, tamper resistance, non-repudiation, and pseudonym, blockchain technology has the potential to strengthen the Internet of Things (IoT) significantly, thus opening an intriguing research area in the integration of blockchain and IoT. However, most existing blockchain schemes were not dedicated to the IoT ecosystem and hence could not meet the specific requirements of IoT. This paper aims to fix the gap. Inspired by Chainspace, a blockchain platform which could be applicable in IoT, VChain is proposed, a novel blockchain scheme suitable for IoT which is more secure, concrete, and practical compared with Chainspace. Specifically, in VChain, a two-layer BFT-based consensus protocol with HoneyBadger BFT protocol is proposed and a collective signature scheme as building blocks. The designs above allow for supporting faulty-shards-tolerance and asynchronous network model, which could not be sustained in Chainspace, and keeping high efficiency as well. Moreover, the sharding strategy presented in VChain, different from that in RapidChain, which adopts the energy-consuming PoW mechanism for sharding, is environmentfriendly and thus makes VChain fit for IoT well. Last but not least, VChain also inherits the merits of Chainspace to separate the execution and verification of smart contracts for privacy.

Software-defined networking (SDN) allows the smart grid to be centrally controlled and managed by decoupling the control plane from the data plane, but it also expands attack surface for attackers. Existing studies about the security of SDN-enabled smart grid (SDSG) mainly focused on static methods such as access control and identity authentication, which is vulnerable to attackers that carefully probe the system. As the attacks become more variable and complex, there is an urgent need for dynamic defense methods. In this paper, we propose a security function virtualization (SFV) based moving target defense of SDSG which makes the attack surface constantly changing. First, we design a dynamic defense mechanism by migrating virtual security function (VSF) instances as the traffic state changes. The centralized SDN controller is re-designed for global status monitoring and migration management. Moreover, we formalize the VSF instances migration problem as an integer nonlinear programming problem with multiple constraints and design a pre-migration algorithm to prevent VSF instances' resources from being exhausted. Simulation results indicate the feasibility of the proposed scheme.

Distributed Denial of Service attack is very harmful to software-defined networking. Effective defense measures are the key to ensure SDN security. An adaptive moving target defense scheme based on end information hopping for SDN is proposed. The source address entropy value and the flow rate method are used to detect the network condition. According to the detection result, the end information is adjusted by time adaptive or space adaptive. A model of active network defense is constructed. The experimental results show that the proposed scheme enhances the anti-attack capability and serviceability compared with other methods, and has greater dynamics and flexibility.

With the interconnection of services and customers, network attacks are capable of large amounts of damage. Flexible Random Virtual IP Multiplexing (FRVM) is a Moving Target Defence (MTD) technique that protects against reconnaissance and access with address mutation and multiplexing. Security techniques must be trusted, however, FRVM, along with past MTD techniques, have gaps in realistic evaluation and thorough analysis of security and performance. FRVM, and two comparison techniques, were deployed on a virtualised network to demonstrate FRVM's security and performance trade-offs. The key results include the security and performance trade-offs of address multiplexing and address mutation. The security benefit of IP address multiplexing is much greater than its performance overhead, deployed on top of address mutation. Frequent address mutation significantly increases an attackers' network scan durations as well as effectively obfuscating and hiding network configurations.

The economic progress of the Internet of Things (IoT) is phenomenal. Applications range from checking the alignment of some components during a manufacturing process, monitoring of transportation and pedestrian levels to enhance driving and walking path, remotely observing terminally ill patients by means of medical devices such as implanted devices and infusion pumps, and so on. To provide security, encrypting the data becomes an indispensable requirement, and symmetric encryptions algorithms are becoming a crucial implementation in the resource constrained environments. Typical symmetric encryption algorithms like Advanced Encryption Standard (AES) showcases an assumption that end points of communications are secured and that the encryption key being securely stored. However, devices might be physically unprotected, and attackers may have access to the memory while the data is still encrypted. It is essential to reserve the key in such a way that an attacker finds it hard to extract it. At present, techniques like White-Box cryptography has been utilized in these circumstances. But it has been reported that applying White-Box cryptography in IoT devices have resulted in other security issues like the adversary having access to the intermediate values, and the practical implementations leading to Code lifting attacks and differential attacks. In this paper, a solution is presented to overcome these problems by demonstrating the need of White-Box Cryptography to enhance the security by utilizing the cipher block chaining (CBC) mode.

The main purpose of this paper is to solve the problem of quantitative and qualitative evaluation of network security. Referring to the relevant network security situation assessment algorithms, and by means of advanced artificial intelligence deep learning technology, to build a network security Indication System based on Cyber Range, and optimize the guidance model of deep learning technology.

In recent years, there is a surge of interest in approaches pertaining to security issues of Internet of Things deployments and applications that leverage machine learning and deep learning techniques. A key prerequisite for enabling such approaches is the development of scalable infrastructures for collecting and processing security-related datasets from IoT systems and devices. This paper introduces such a scalable and configurable data collection infrastructure for data-driven IoT security. It emphasizes the collection of (security) data from different elements of IoT systems, including individual devices and smart objects, edge nodes, IoT platforms, and entire clouds. The scalability of the introduced infrastructure stems from the integration of state of the art technologies for large scale data collection, streaming and storage, while its configurability relies on an extensible approach to modelling security data from a variety of IoT systems and devices. The approach enables the instantiation and deployment of security data collection systems over complex IoT deployments, which is a foundation for applying effective security analytics algorithms towards identifying threats, vulnerabilities and related attack patterns.

Internet of Things (IoT) devices industry is rapidly growing, with an accelerated increase in the list of manufacturers offering a wide range of smart devices selected to enhance end-users' standard of living. Security remains an after-thought in these devices resulting in vulnerabilities. While there exists a cryptographic protocol designed to solve such authentication problem, the computational complexity of cryptographic protocols and scalability problems make almost all cryptography-based authentication protocols impractical for IoT. Wireless RFF (Radio Frequency Fingerprinting) comes as a physical layer-based security authentication method that improves wireless security authentication, which is especially useful for the power and computing limited devices. As a proof-of-concept, this paper proposes a universal SDR (software defined Radio)-based inexpensive implementation intended to sense emitted wireless signals from IoT devices. Our approach is validated by extracting mobile phone signal bursts under different user-dedicated modes. The proposed setup is well adapted to accurately capture signals from different telecommunication standards. To ensure a unique identification of IoT devices, this paper also provides an optimum set of features useful to generate the device identity fingerprint.

So-called IoT, based on use of enabling technologies like 5G, Wi-Fi, BT, NFC, RFID, IPv6 as well as being widely applied for sensor networks, robots, Wearable and Cyber-PHY, invades rapidly to our every day. There are a lot of apps and software platforms to IoT support. However, a most important problem of QoS optimization, which lays in Performance, Reliability and Scalability for IoT, is not yet solved. The extended Internet of the future needs these solutions based on the cooperation between fog and clouds with delegating of the analytics blocks via agents, adaptive interfaces and protocols. The next problem is as follows: IoT can generate large arrays of unmanaged, weakly-structured, and non-configured data of various types, known as "Big Data". The given papers deals with the both problems. A special problem is Security and Privacy in potentially "dangerous" IoTscenarios. Anyway, this subject needs as special discussion for risks evaluation and cooperative intrusion detection. Some advanced approaches for optimization of Performance, Reliability and Scalability for IoT-solutions are offered within the paper. The paper discusses the Best Practises and Case Studies aimed to solution of the established problems.

This article discusses the vulnerabilities and complexity of designing secure IoT-solutions, and then presents proven approaches to protecting devices and gateways. Specifically, security mechanisms such as device authentication (including certificate-based authentication), device authentication, and application a verification of identification are described. The authors consider a protocol of message queue telemetry transport for speech and sensor networks on the Internet, its features, application variants, and characteristic procedures. The principle of "publishersubscriber" is considered. An analysis of information elements and messages is carried out. The urgency of the theme is due to the rapid development of "publisher-subscriber" architecture, for which the protocol is most characteristic.

The timely exchange of information on new threats and vulnerabilities has become a cornerstone of effective cyber defence in recent years. Especially national authorities increasingly assume their role as information brokers through national cyber security centres and distribute warnings on new attack vectors and vital recommendations on how to mitigate them. Although many of these initiatives are effective to some degree, they also suffer from severe limitations. Many steps in the exchange process require extensive human involvement to manually review, vet, enrich, analyse and distribute security information. Some countries have therefore started to adopt distributed cyber security sensor networks to enable the automatic collection, analysis and preparation of security data and thus effectively overcome limiting scalability factors. The basic idea of IoC-centric cyber security sensor networks is that the national authorities distribute Indicators of Compromise (IoCs) to organizations and receive sightings in return. This effectively helps them to estimate the spreading of malware, anticipate further trends of spreading and derive vital findings for decision makers. While this application case seems quite simple, there are some tough questions to be answered in advance, which steer the further design decisions: How much can the monitored organization be trusted to be a partner in the search for malware? How much control of the scanning process should be delegated to the organization? What is the right level of search depth? How to deal with confidential indicators? What can be derived from encrypted traffic? How are new indicators distributed, prioritized, and scan targets selected in a scalable manner? What is a good strategy to re-schedule scans to derive meaningful data on trends, such as rate of spreading? This paper suggests a blueprint for a sensor network and raises related questions, outlines design principles, and discusses lessons learned from small-scale pilots.

Software-Defined Network (SDN) is the dynamic network technology to address the issues of traditional networks. It provides centralized view of the whole network through decoupling the control planes and data planes of a network. Most SDN-based security services globally detect and block a malicious host based on IP address. However, the IP address is not verified during the forwarding process in most cases and SDN-based security service may block a normal host with forged IP address in the whole network, which means false-positive. In this paper, we introduce an attack scenario that uses forged packets to make the security service consider a victim host as an attacker so that block the victim. We also introduce cost-effective risk avoidance strategy.

Internet of things is a network formed between two or more devices through internet which helps in sharing data and resources. IoT is present everywhere and lot of applications in our day-to-day life such as smart homes, smart grid system which helps in reducing energy consumption, smart garbage collection to make cities clean, smart cities etc. It has some limitations too such as concerns of security of the network and the cost of installations of the devices. There have been many researches proposed various method in improving the IoT systems. In this paper, we have discussed about the scope and limitations of IoT in various fields and we have also proposed a technique to secure offline architecture of IoT.

In this paper, we focuses on an access control issue in the Internet of Things (IoT). Generally, we firstly propose a decentralized IoT system based on blockchain. Then we establish a secure fine-grained access control strategies for users, devices, data, and implement the strategies with smart contract. To trigger the smart contract, we design different transactions. Finally, we use the multi-index table struct for the access right's establishment, and store the access right into Key-Value database to improve the scalability of the decentralized IoT system. In addition, to improve the security of the system we also store the access records on the blockchain and database.

SSL certificates are a core component of the public key infrastructure that underpins encrypted communication in the Internet. In this paper, we report the results of a longitudinal study of the characteristics of SSL certificate chains presented to clients during secure web (HTTPS) connection setup. Our data set consists of 23B SSL certificate chains collected from a global panel consisting of over 2M residential client machines over a period of 6 months. The data informing our analyses provide perspective on the entire chain of trust, including root certificates, across a wide distribution of client machines. We identify over 35M unique certificate chains with diverse relationships at all levels of the PKI hierarchy. We report on the characteristics of valid certificates, which make up 99.7% of the total corpus. We also examine invalid certificate chains, finding that 93% of them contain an untrusted root certificate and we find they have shorter average chain length than their valid counterparts. Finally, we examine two unintended but prevalent behaviors in our data: the deprecation of root certificates and secure traffic interception. Our results support aspects of prior, scan-based studies on certificate characteristics but contradict other findings, highlighting the importance of the residential client-side perspective.

Software Defined Network (SDN) is a revolutionary networking paradigm which provides the flexibility of programming the network interface as per the need and demand of the user. Software Defined Network (SDN) is independent of vendor specific hardware or protocols and offers the easy extensions in the networking. A customized network as per on user demand facilitates communication control via a single entity i.e. SDN controller. Due to this SDN Controller has become more vulnerable to SDN security attacks and more specifically a single point of failure. It is worth noticing that vulnerabilities were identified because of customized applications which are semi-independent of underlying network infrastructure. No doubt, SDN has provided numerous benefits like breaking vendor lock-ins, reducing overhead cost, easy innovations, increasing programmability among devices, introducing new features and so on. But security of SDN cannot be neglected and it has become a major topic of debate. The communication channel used in SDN is OpenFlow which has made TLS implementation an optional approach in SDN. TLS adoption is important and still vulnerable. This paper focuses on making SDN OpenFlow communication more secure by following extended TLS support and defensive algorithm.

This study has built a simulation of a smart home system by the Alibaba ECS. The architecture of hardware was based on edge computing technology. The whole method would design a clear classifier to find the boundary between regular and mutation codes. It could be applied in the detection of the mutation code of network. The project has used the dataset vector to divide them into positive and negative type, and the final result has shown the RBF-function SVM method perform best in this mission. This research has got a good network security detection in the IoT systems and increased the applications of machine learning.

Machine learning has been adopted widely to perform prediction and classification. Implementing machine learning increases security risks when computation process involves sensitive data on training and testing computations. We present a proposed system to protect machine learning engines in IoT environment without modifying internal machine learning architecture. Our proposed system is designed for passwordless and eliminated the third-party in executing machine learning transactions. To evaluate our a proposed system, we conduct experimental with machine learning transactions on IoT board and measure computation time each transaction. The experimental results show that our proposed system can address security issues on machine learning computation with low time consumption.

The Internet has gradually penetrated into the national economy, politics, culture, military, education and other fields. Due to its openness, interconnectivity and other characteristics, the Internet is vulnerable to all kinds of malicious attacks. The research uses a honeynet to collect attacker information, and proposes a network penetration recognition technology based on interactive behavior analysis. Using Sebek technology to capture the attacker's keystroke record, time series modeling of the keystroke sequences of the interaction behavior is proposed, using a Recurrent Neural Network. The attack recognition method is constructed by using Long Short-Term Memory that solves the problem of gradient disappearance, gradient explosion and long-term memory shortage in ordinary Recurrent Neural Network. Finally, the experiment verifies that the short-short time memory network has a high accuracy rate for the recognition of penetration attacks.

Many websites induce the browser to send network traffic in response to user input events. This includes websites with autocomplete, a popular feature on search engines that anticipates the user's query while they are typing. Websites with this functionality require HTTP requests to be made as the query input field changes, such as when the user presses a key. The browser responds to input events by generating network traffic to retrieve the search predictions. The traffic emitted by the client can expose the timings of keyboard input events which may lead to a keylogging side channel attack whereby the query is revealed through packet inter-arrival times. We investigate the feasibility of such an attack on several popular search engines by characterizing the behavior of each website and measuring information leakage at the network level. Three out of the five search engines we measure preserve the mutual information between keystrokes and timings to within 1% of what it is on the host. We describe the ways in which two search engines mitigate this vulnerability with minimal effects on usability.

In this paper, we focus on versatile and scalable key management for Advanced Metering Infrastructure (AMI) in Smart Grid (SG). We show that a recently proposed key graph based scheme for AMI systems (VerSAMI) suffers from efficiency flaws in its broadcast key management protocol. Then, we propose a new key management scheme (iVerSAMI) by modifying VerSAMI's key graph structure and proposing a new broadcast key update process. We analyze security and performance of the proposed broadcast key management in details to show that iVerSAMI is secure and efficient in terms of storage and communication overheads.

Recent advances in networking and communication technologies have enabled Internet-of-Things (IoT) devices to communicate more frequently and faster. An IoT device typically transmits data over the Internet which is an insecure channel. Cyber attacks such as denial-of-service (DoS), man-in-middle, and SQL injection are considered as big threats to IoT devices. In this paper, an anomaly-based intrusion detection scheme is proposed that can protect sensitive information and detect novel cyber-attacks. The Artificial Bee Colony (ABC) algorithm is used to train the Random Neural Network (RNN) based system (RNN-ABC). The proposed scheme is trained on NSL-KDD Train+ and tested for unseen data. The experimental results suggest that swarm intelligence and RNN successfully classify novel attacks with an accuracy of 91.65%. Additionally, the performance of the proposed scheme is also compared with a hybrid multilayer perceptron (MLP) based intrusion detection system using sensitivity, mean of mean squared error (MMSE), the standard deviation of MSE (SDMSE), best mean squared error (BMSE) and worst mean squared error (WMSE) parameters. All experimental tests confirm the robustness and high accuracy of the proposed scheme.

Most of the swarm optimization techniques are inspired by the characteristics as well as behaviour of flock of birds whereas Artificial Bee Colony is based on the foraging characteristics of the bees. However, certain problems which are solved by ABC do not yield desired results in-terms of performance. ABC is a new devised swarm intelligence algorithm and predominately employed for optimization of numerical problems. The main reason for the success of ABC algorithm is that it consists of feature such as fathomable and flexibility when compared to other swarm optimization algorithms and there are many possible applications of ABC. Cloud computing has their limitation in their application and functionality. The cloud computing environment experiences several security issues such as Dos attack, replay attack, flooding attack. In this paper, an effective classifier is proposed based on Artificial Bee Colony for cloud computing. It is evident in the evaluation results that the proposed classifier achieved a higher accuracy rate.