Biblio

HTTPS provides authentication, data confidentiality, and integrity for secure web applications in the Internet. In order to establish secure connections with the target website but not a man-in-the-middle or impersonation attacker, a browser shows security warnings to users, when different HTTPS errors happen (e.g., it fails to build a valid certificate chain, or the certificate subject does not match the domain visited). Each browser implements its own design of warnings on HTTPS errors, to balance security and usability. This paper presents a list of common HTTPS errors, and we investigate the browser behaviors on each error. Our study discloses browser defects on handling HTTPS errors in terms of cryptographic algorithm, certificate verification, name validation, HPKP, and HSTS.

We consider transmissions of secure messages over a burst erasure wiretap channel under decoding delay constraint. For block codes we introduce and study delay optimal secure burst erasure correcting (DO-SBE) codes that provide perfect security and recover a burst of erasures of a limited length with minimum possible delay. Our explicit constructions of DO-SBE block codes achieve maximum secrecy rate. We also consider a model of a burst erasure wiretap channel for the streaming setup, where in any sliding window of a given size, in a stream of encoded source packets, the eavesdropper is able to observe packets in an interval of a given size. For that model we obtain an information theoretic upper bound on the secrecy rate for delay optimal streaming codes. We show that our block codes can be used for construction of delay optimal burst erasure correcting streaming codes which provide perfect security and meet the upper bound for a certain class of code parameters.

For secure and high-quality wireless transmission, we propose a chaos multiple-input multiple-output (C-MIMO) transmission scheme, in which physical layer security and a channel coding effect with a coding rate of 1 are obtained by chaotic MIMO block modulation. In previous studies, we introduced a log-likelihood ratio (LLR) to C-MIMO to exploit LLR-based outer channel coding and turbo decoding, and obtained further coding gain. However, we only studied the concatenation of turbo code, low-density parity check (LDPC) code, and convolutional code which were relatively high-complexity or weak codes; thus, outer code having further low-complexity and strong error correction ability were expected. In particular, a transmission system with short and good code is required for control signaling, such as in 5G networks. Therefore, in this paper, we propose a polar code concatenation to C-MIMO, and introduce soft successive decoding (SCAD) and soft successive cancellation list decoding (SSCLD) as LLR-based turbo decoding for polar code. We numerically evaluate the bit error rate performance of the proposed scheme, and compare it to the conventional LDPC-concatenated transmission.

Network security and data confidentiality of transmitted information are among the non-functional requirements of industrial wireless sensor networks (IWSNs) in addition to latency, reliability and energy efficiency requirements. Physical layer security techniques are promising solutions to assist cryptographic methods in the presence of an eavesdropper in IWSN setups. In this paper, we propose a physical layer security scheme, which is based on both insertion of an random error vector to forward error correction (FEC) codewords and transmission over decentralized relay nodes. Reed-Solomon and Golay codes are selected as FEC coding schemes and the security performance of the proposed model is evaluated with the aid of decoding error probability of an eavesdropper. The results show that security level is highly based on the location of the eavesdropper and secure communication can be achieved when some of channels between eavesdropper and relay nodes are significantly noisier.

Multishot network coding is considered in a worst-case adversarial setting in which an omniscient adversary with unbounded computational resources may inject erroneous packets in up to t links, erase up to ρ packets, and wire-tap up to μ links, all throughout ℓ shots of a (random) linearly-coded network. Assuming no knowledge of the underlying linear network code (in particular, the network topology and underlying linear code may change with time), a coding scheme achieving zero-error communication and perfect secrecy is obtained based on linearized Reed-Solomon codes. The scheme achieves the maximum possible secret message size of ℓn'-2t-ρ-μ packets, where n' is the number of outgoing links at the source, for any packet length m ≥ n' (largest possible range), with only the restriction that ℓ\textbackslashtextless;q (size of the base field). By lifting this construction, coding schemes for non-coherent communication are obtained with information rates close to optimal for practical instances. A Welch-Berlekamp sum-rank decoding algorithm for linearized Reed-Solomon codes is provided, having quadratic complexity in the total length n = ℓn', and which can be adapted to handle not only errors, but also erasures, wire-tap observations and non-coherent communication.

Functionally safe control logic design without full duplication is difficult due to the complexity of random control logic. The Reorder buffer (ROB) is a control logic function commonly used in high performance computing systems. In this study, we focus on a safe ROB design used in an industry quality Network-on-Chip (NoC) Advanced eXtensible Interface (AXI) Network Interface (NI) block. We developed and applied area efficient safe design techniques including partial duplication, Error Detection Code (EDC) and invariance checking with formal proofs and showed that we can achieve a desired safe Diagnostic Coverage (DC) requirement with small area and power overheads and no performance degradation.

This paper provides a proof of concept for using SRAM based Physically Unclonable Functions (PUFs) to generate private keys for IoT devices. PUFs are utilized, as there is inadequate protection for secret keys stored in the memory of the IoT devices. We utilize a custom-made Arduino mega shield to extract the fingerprint from SRAM chip on demand. We utilize the concepts of ternary states to exclude the cells which are easily prone to flip, allowing us to extract stable bits from the fingerprint of the SRAM. Using the custom-made software for our SRAM device, we can control the error rate of the PUF to achieve an adjustable memory-based PUF for key generation. We utilize several fuzzy extractor techniques based on using different error correction coding methods to generate secret keys from the SRAM PUF, and study the trade-off between the false authentication rate and false rejection rate of the PUF.

It is investigated how to achieve semantic security for the wiretap channel. A new type of functions called biregular irreducible (BRI) functions, similar to universal hash functions, is introduced. BRI functions provide a universal method of establishing secrecy. It is proved that the known secrecy rates of any discrete and Gaussian wiretap channel are achievable with semantic security by modular wiretap codes constructed from a BRI function and an error-correcting code. A characterization of BRI functions in terms of edge-disjoint biregular graphs on a common vertex set is derived. This is used to study examples of BRI functions and to construct new ones.

Security down to hardware (HW) has become a fundamental requirement in highly-connected and ubiquitously deployed systems, as a result of the recent discovery of a wide range of vulnerabilities in commercial devices, as well as the affordability of several attacks that were traditionally considered unlikely. HW security is now a fundamental requirement in view of the massive attack surface that they expose, and the substantial power penalty entailed by solutions at higher levels of abstraction.In large-scale networks of connected devices, attacks need to be counteracted at low cost down to individual nodes, which need to be identified or authenticated securely, and protect confidentiality and integrity of the data that is sensed, stored, processed and wirelessly exchanged. In many security-sensitive applications, physical attacks against individual chips need to be counteracted to truly enable an end-to-end chain of trust from nodes to cloud and actuation (i.e., always-on security). These requirements have motivated the on-going global research and development effort to assure hardware security at low cost and power penalty down to low-end devices (i.e., ubiquitous security).This paper provides a fresh overview of the fundamentals, the design requirements and the state of the art in primitives for HW security. Challenges and future directions are discussed using recent silicon demonstrations as case studies.

Secure network coding realizes the secrecy of the message when the message is transmitted via noiseless network and a part of edges or a part of intermediate nodes are eavesdropped. In this framework, if the channels of the network has noise, we apply the error correction to noisy channel before applying the secure network coding. In contrast, secure physical layer network coding is a method to securely transmit a message by a combination of coding operation on nodes when the network is given as a set of noisy channels. In this paper, we give several examples of network, in which, secure physical layer network coding realizes a performance that cannot be realized by secure network coding.

In this paper, we consider the application of Reed-Solomon (RS) channel coding for joint error correction and cooperative network coding on non-binary phase shift keying (PSK) modulated signals. The relay first decodes the RS channel coded messages received each in a time slot from all sources before applying network coding (NC) by the use of bit-level exclusive OR (XOR) operation. The network coded resulting message is then channel encoded before its transmission to the next relay or to the destination according to the network configuration. This scenario shows superior performance in comparison with the case where the relay does not perform channel coding/decoding. For different orders of PSK modulation and different wireless configurations, simulation results demonstrate the improvements resulting from the use of RS channel codes in terms of symbol error rate (SER) versus signal-to-noise ratio (SNR).

Quantum technology is a new field of physics and engineering. In emerging areas like Quantum Cryptography, Quantum Computing etc, Quantum circuits play a key role. Quantum circuit is a model for Quantum computation, the computation process of Quantum gates are based on reversible logic. Encoder and Decoder are designed using Quantum gates, and synthesized in the QCAD simulator. Quantum error correction (QEC) is essential to protect quantum information from errors due to quantum noise and decoherence. It is also use to achieve fault-tolerant quantum computation that deals with noise on stored information, faulty quantum gates and faulty measurements.

In this paper, we propose a novel visual secret sharing (VSS) scheme for color QR code (VSSCQR) with (n, n) threshold based on high capacity, admirable visual effects and popularity of color QR code. By splitting and encoding a secret image into QR codes and then fusing QR codes to generate color QR code shares, the scheme can share the secret among a certain number of participants. However, less than n participants cannot reveal any information about the secret. The embedding amount and position of the secret image bits generated by VSS are in the range of the error correction ability of the QR code. Each color share is readable, which can be decoded and thus may not come into notice. On one hand, the secret image can be reconstructed by first decomposing three QR codes from each color QR code share and then stacking the corresponding QR codes based on only human visual system without computational devices. On the other hand, by decomposing three QR codes from each color QR code share and then XORing the three QR codes respectively, we can reconstruct the secret image losslessly. The experiment results display the effect of our scheme.

The main objective of this research work is to enhance the data storage capacity of the QR codes. By achieving the research aim, we can visualize rapid increase in application domains of QR Codes, mostly for smart cities where one needs to store bulk amount of data. Nowadays India is experiencing demonetization step taken by Prime Minister of the country and QR codes can play major role for this step. They are also helpful for cashless society as many vendors have registered themselves with different e-wallet companies like paytm, freecharge etc. These e-wallet companies have installed QR codes at cash counter of such vendors. Any time when a customer wants to pay his bills, he only needs to scan that particular QR code. Afterwards the QR code decoder application start working by taking necessary action like opening payment gateway etc. So, objective of this research study focuses on solving this issue by applying proposed methodology.

Visible light communications is an emerging architecture with unlicensed and huge bandwidth resources, security, and experimental implementations and standardization efforts. Display based transmitter and camera based receiver architectures are alternatives for device-to-device (D2D) and home area networking (HAN) systems by utilizing widely available TV, tablet and mobile phone screens as transmitters while commercially available cameras as receivers. Current architectures utilizing data hiding and unobtrusive steganography methods promise data transmission without user distraction on the screen. however, current architectures have challenges with the limited capability of data hiding in translucency or color shift based methods of hiding by uniformly distributing modulation throughout the screen and keeping eye discomfort at an acceptable level. In this article, foveation property of human visual system is utilized to define a novel modulation method denoted by FoVLC which adaptively improves data hiding capability throughout the screen based on the current eye focus point of viewer. Theoretical modeling of modulation and demodulation mechanisms hiding data in color shifts of pixel blocks is provided while experiments are performed for both FoVLC method and uniform data hiding denoted as conventional method. Experimental tests for the simple design as a proof of concept decreases average bit error rate (BER) to approximately half of the value obtained with the conventional method without user distraction while promising future efforts for optimizing block sizes and utilizing error correction codes.

This paper introduces the notion of one-way communication schemes with partial noisy feedback. To support this communication, the schemes suppose that Alice and Bob wish to communicate: Alice sends a sequence of alphabets over a channel to Bob, while Alice receives feedback bits from Bob for δ fraction of the transmissions. An adversary is allowed to tamper up to a constant fraction of these transmissions for both forward rounds and feedback rounds separately. This paper intends to determine the Maximum Error Rate (MER), as a function of δ (0 ≤ δ ≤ 1), under the MER rate, so that Alice can successfully communicate the messages to Bob via some protocols with δ fraction of noisy feedback. To provide a reasonable solution for the above problem, we need to explore a new kind of coding scheme for the interactive communication. In this paper, we use the notion of “non-malleable codes” (NMC) which relaxes the notions of error-correction and error-detection to some extent in communication. Informally, a code is non-malleable if the message contained in a modified codeword is either the original message or a completely unrelated value. This property largely enforces the way to detect the transmission errors. Based on the above knowledge, we provide an alphabet-based encoding scheme, including a pair of (Enc, Dec). Suppose the message needing to be transmitted is m; if m is corrupted unintentionally, then the encoding scheme Dec(Enc(m)) outputs a symbol `⊥' to denote that some potential corruptions happened during transmission. In this work, based on the previous results, we show that for any δ ∈ (0; 1), there exists a deterministic communication scheme with noiseless full feedback(δ = 1), such that the maximal tolerable error fraction γ (on Alice's transmissions) can be up to 1/2, theoretically. Moreover, we show that for any δ ∈ (0; 1), there exists a communication scheme with noisy feedback, denoting the forward and backward rounds noised with error fractions of γ0and γ1respectively, such that the maximal tolerable error fraction γ0(on forward rounds) can be up to 1/2, as well as the γ1(on feedback rounds) up to 1.

Dual Connectivity(DC) is one of the key technologies standardized in Release 12 of the 3GPP specifications for the Long Term Evolution (LTE) network. It attempts to increase the per-user throughput by allowing the user equipment (UE) to maintain connections with the MeNB (master eNB) and SeNB (secondary eNB) simultaneously, which are inter-connected via non-ideal backhaul. In this paper, we focus on one of the use cases of DC whereby the downlink U-plane data is split at the MeNB and transmitted to the UE via the associated MeNB and SeNB concurrently. In this case, out-of-order packet delivery problem may occur at the UE due to the delay over the non-ideal backhaul link, as well as the dynamics of channel conditions over the MeNB-UE and SeNB-UE links, which will introduce extra delay for re-ordering the packets. As a solution, we propose to adopt the RaptorQ FEC code to encode the source data at the MeNB, and then the encoded symbols are separately transmitted through the MeNB and SeNB. The out-of-order problem can be effectively eliminated since the UE can decode the original data as long as it receives enough encoded symbols from either the MeNB or SeNB. We present detailed protocol design for the RaptorQ code based concurrent transmission scheme, and simulation results are provided to illustrate the performance of the proposed scheme.

This paper presents a new technique for providing the analysis and comparison of wiretap codes in the small blocklength regime over the binary erasure wiretap channel. A major result is the development of Monte Carlo strategies for quantifying a code's equivocation, which mirrors techniques used to analyze forward error correcting codes. For this paper, we limit our analysis to coset-based wiretap codes, and give preferred strategies for calculating and/or estimating the equivocation in order of preference. We also make several comparisons of different code families. Our results indicate that there are security advantages to using algebraic codes for applications that require small to medium blocklengths.

Transmission techniques based on channel coding with feedback are proposed in this paper to enhance the security of wireless communications systems at the physical layer. Reliable and secure transmission over an additive noise Gaussian wiretap channel is investigated using Bose-Chaudhuri-Hocquenghem (BCH) and Low-Density Parity-Check (LDPC) channel codes. A hybrid automatic repeat-request (HARQ) protocol is used to allow for the retransmission of coded packets requested by the intended receiver (Bob). It is assumed that an eavesdropper (Eve) has access to all forward and feedback transmitted packets. To limit the information leakage to Eve, retransmitted packets are subdivided into smaller granular subpackets. Retransmissions are stopped as soon as the decoding process at the legitimate (Bob) receiver converges. For the hard decision decoded BCH codes, a framework to compute the frame error probability with granular HARQ is proposed. For LDPC codes, the HARQ retransmission requests are based on received symbols likelihood computations: the legitimate recipient request for the retransmission of the set of bits that are more likely to help for successful LDPC decoding. The performances of the proposed techniques are assessed for nul and negative security gap (SG) values, that is when the eavesdropper's channel benefits from equal or better channel conditions than the legitimate channel.

An effective storage and management of file systems is very much essential now a days to avoid the wastage of storage space provided by the cloud providers. Data de-duplication technique has been used widely which allows only to store a single copy of a file and thus avoids duplication of file in the cloud storage servers. It helps to reduce the amount of storage space and save bandwidth of cloud service and thus in high cost savings for the cloud service subscribers. Today data that we need to store are in encrypted format to ensure the security. So data encryption by data owners with their own keys makes the de-duplication impossible for the cloud service subscriber as the data encryption with a key converts data into an unidentifiable format called cipher text thus encrypting, even the same data, with different keys may result in different cipher texts. But de-duplication and encryption need to work in hand to hand to ensure secure, authorized and optimized storage. In this paper, we propose a scheme for file-level de-duplication on encrypted files like text, images and even on video files stored in cloud based on the user's privilege set and file privilege set. This paper proposed a de-duplication system which distributes the files across different servers. The system uses an Erasure Correcting Code technique to re-construct the files even if the parts of the files are lost by attacking any server. Thus the proposed system can ensure both the security and reliability of encrypted files.

In this paper we analyse possibilities of application of post-quantum code based signature schemes for message authentication purposes. An error-correcting code based digital signature algorithm is presented. There also shown results of computer simulation for this algorithm in case of Reed-Solomon codes and the estimated efficiency of its software implementation. We consider perspectives of error-correcting codes for message authentication and outline further research directions.

Traditional encryption techniques require packet overhead, produce processing time delay, and suffer from severe quality of service deterioration due to fades and interference in wireless channels. These issues reduce the effective transmission data rate (throughput) considerably in wireless communications, where data rate with limited bandwidth is the main constraint. In this paper, performance evaluation analyses are conducted for an integrated signaling-encryption mechanism that is secure and enables improved throughput and probability of bit-error in wireless channels. This mechanism eliminates the drawbacks stated herein by encrypting only a small portion of an entire transmitted frame, while the rest is not subject to traditional encryption but goes through a signaling process (designed transformation) with the plaintext of the portion selected for encryption. We also propose to incorporate error correction coding solely on the small encrypted portion of the data to drastically improve the overall bit-error rate performance while not noticeably increasing the required bit-rate. We focus on validating the signaling-encryption mechanism utilizing Hamming and convolutional error correction coding by conducting an end-to-end system-level simulation-based study. The average probability of bit-error and throughput of the encryption mechanism are evaluated over standard Gaussian and Rayleigh fading-type channels and compared to the ones of the conventional advanced encryption standard (AES).

In this paper, we propose an accumulated loss recovery algorithm on overlay multicast system using Fountain codes. Fountain code successfully decodes the packet loss, but it is weak in accumulated losses on multicast tree. The proposed algorithm overcomes an accumulated loss and significantly reduces delay on overlay multicast tree.