Biblio
This paper presents a new micro-architectural vulnerability on the power management units of modern computers which creates an electromagnetic-based side-channel. The key observations that enable us to discover this sidechannel are: 1) in an effort to manage and minimize power consumption, modern microprocessors have a number of possible operating modes (power states) in which various sub-systems of the processor are powered down, 2) for some of the transitions between power states, the processor also changes the operating mode of the voltage regulator module (VRM) that supplies power to the affected sub-system, and 3) the electromagnetic (EM) emanations from the VRM are heavily dependent on its operating mode. As a result, these state-dependent EM emanations create a side-channel which can potentially reveal sensitive information about the current state of the processor and, more importantly, the programs currently being executed. To demonstrate the feasibility of exploiting this vulnerability, we create a covert channel by utilizing the changes in the processor's power states. We show how such a covert channel can be leveraged to exfiltrate sensitive information from a secured and completely isolated (air-gapped) laptop system by placing a compact, inexpensive receiver in proximity to that system. To further show the severity of this attack, we also demonstrate how such a covert channel can be established when the target and the receiver are several meters away from each other, including scenarios where the receiver and the target are separated by a wall. Compared to the state-of-the-art, the proposed covert channel has \textbackslashtextgreater3x higher bit-rate. Finally, to demonstrate that this new vulnerability is not limited to being used as a covert channel, we demonstrate how it can be used for attacks such as keystroke logging.
The class φ2 is a single transistor, fast transient inverter topology often associated with power conversion at very high frequency (VHF: 30MHz-300MHz). At VHF, gate drivers available on the market fail to provide the adequate transistor switching signal. Hence, there is a need for new power topologies that do no make use of gate drivers but are still suitable for power conversion at VHF. In This paper, we introduce a new class φ;2 topology that incorporates an oscillator, which takes the drain signal through a feedback circuit in order to force the transistor switching. A design methodology is provided and a 1MHz 20V input prototype is built in order to validate the topology behaviour.
The relative permittivity (also known as dielectric constant) is one of the physical properties that characterize a substance. The measurement of its magnitude can be useful in the analysis of several fluids, playing an important role in many industrial processes. This paper presents a method for measuring the relative permittivity of fluids, with the possibility of real-time monitoring. The method comprises the immersion of a capacitive sensor inside a tank or duct, in order to have the inspected substance as its dielectric. An electronic circuit is responsible for exciting this sensor, which will have its capacitance measured through a quick analysis of two analog signals outputted by the circuit. The developed capacitance meter presents a novel topology derived from the well-known Howland current source. One of its main advantages is the capacitance-selective behavior, which allows the system to overcome the effects of parasitic resistive and inductive elements on its readings. In addition to an adjustable current output that suits different impedance magnitudes, it exhibits a steady oscillating behavior, thus allowing continuous operation without any form of external control. This paper presents experimental results obtained from the proposed system and compares them to measurements made with proven and calibrated equipment. Two initial capacitance measurements performed with the system for evaluating the sensor's characteristics exhibited relative errors of approximately 0.07% and 0.53% in comparison to an accurate workbench LCR meter.
The rapid growth and globalization of the integrated circuit (IC) industry put the threat of hardware Trojans (HTs) front and center among all security concerns in the IC supply chain. Current Trojan detection approaches always assume HTs are composed of digital circuits. However, recent demonstrations of analog attacks, such as A2 and Rowhammer, invalidate the digital assumption in previous HT detection or testing methods. At the system level, attackers can utilize the analog properties of the underlying circuits such as charge-sharing and capacitive coupling effects to create information leakage paths. These new capacitor-based vulnerabilities are rarely covered in digital testings. To address these stealthy yet harmful threats, we identify a large class of such capacitor-enabled attacks and define them as charge-domain Trojans. We are able to abstract the detailed charge-domain models for these Trojans and expose the circuit-level properties that critically contribute to their information leakage paths. Aided by the abstract models, an information flow tracking (IFT) based solution is developed to detect charge-domain leakage paths and then identify the charge-domain Trojans/vulnerabilities. Our proposed method is validated on an experimental RISC microcontroller design injected with different variants of charge-domain Trojans. We demonstrate that successful detection can be accomplished with an automatic tool which realizes the IFT-based solution.
Series-connected IGBTs, when properly controlled, operate similarly to a single device with a much higher voltage capacity. Integrating series IGBTs into a Modular Multilevel Converter (MMC) can reduce its complexity without compromising the voltage capacity. This paper presents the circuit design on the sub-modular level of a MMC in which all the switching devices are series-connected IGBTs. The voltage sharing among the series IGBTs are regulated in a self-balancing manner. Therefore, no central series IGBT controller is needed, which greatly reduces the sensing and communication complexities, increasing the flexibility and expandability. Hardware experiment results demonstrate that the series IGBTs are able to self-regulate the voltage sharing in a fast and accurate manner and the system can operate similarly to a sub-module in a MMC.
True random numbers have a fair role in modern digital transactions. In order to achieve secured authentication, true random numbers are generated as security keys which are highly unpredictable and non-repetitive. True random number generators are used mainly in the field of cryptography to generate random cryptographic keys for secure data transmission. The proposed work aims at the generation of true random numbers based on CMOS Boolean Chaotic Oscillator. As a part of this work, ASIC approach of CMOS Boolean Chaotic Oscillator is modelled and simulated using Cadence Virtuoso tool based on 45nm CMOS technology. Besides, prototype model has been implemented with circuit components and analysed using NI ELVIS platform. The strength of the generated random numbers was ensured by NIST (National Institute of Standards and Technology) Test Suite and ASIC approach was validated through various parameters by performing various analyses such as frequency, delay and power.
Maintaining the security and integrity of our food supply chain has emerged as a critical need. In this paper, we describe a novel authentication approach that can significantly improve the security of the food supply chain. It relies on applying nuclear quadrupole resonance (NQR) spectroscopy to authenticate the contents of packaged food products. NQR is a non-invasive, non-destructive, and quantitative radio frequency (RF) spectroscopic technique. It is sensitive to subtle features of the solid-state chemical environment such that signal properties are influenced by the manufacturing process, thus generating a manufacturer-specific watermark or intrinsic tag for the product. Such tags enable us to uniquely characterize and authenticate products of identical composition but from different manufacturers based on their NQR signal parameters. These intrinsic tags can be used to verify the integrity of a product and trace it through the supply chain. We apply a support vector machine (SVM)-based classification approach that trains the SVM with measured NQR parameters and then authenticates food products by checking their test responses. Measurement on an example substance using semi-custom hardware shows promising results (95% classification accuracy) which can be further improved with improved instrumentation.
We propose $μ$Leech, a new embedded trusted platform module for next generation power scavenging devices. Such power scavenging devices are already widely deployed. For instance, the Square point-of-sale reader uses the microphone/speaker interface of a smartphone for communications and as power supply. While such devices are used as trusted devices in security critical applications in the wild, they have not been properly evaluated yet. $μ$Leech can securely store keys and provide cryptographic services to any connected smart phone. Our design also facilitates physical security analysis by providing interfaces to facilitate acquisition of power traces and clock manipulation attacks. Thus $μ$Leech empowers security researchers to analyze leakage in next generation embedded and IoT devices and to evaluate countermeasures before deployment.
Today's more reliable communication technology, together with the availability of higher computational power, have paved the way for introduction of more advanced automation systems based on distributed intelligence and multi-agent technology. However, abundance of data, while making these systems more powerful, can at the same time act as their biggest vulnerability. In a web of interconnected devices and components functioning within an automation framework, potential impact of malfunction in a single device, either through internal failure or external damage/intrusion, may lead to detrimental side-effects spread across the whole underlying system. The potentially large number of devices, along with their inherent interrelations and interdependencies, may hinder the ability of human operators to interpret events, identify their scope of impact and take remedial actions if necessary. Through utilization of the concepts of graph-theoretic fuzzy cognitive maps (FCM) and expert systems, this paper puts forth a solution that is able to reveal weak links and vulnerabilities of an automation system, should it become exposed to partial internal failure or external damage. A case study has been performed on the IEEE 34-bus test distribution system to show the efficiency of the proposed scheme.