Biblio

The development of data communications enabling the exchange of information via mobile devices more easily. Security in the exchange of information on mobile devices is very important. One of the weaknesses in steganography is the capacity of data that can be inserted. With compression, the size of the data will be reduced. In this paper, designed a system application on the Android platform with the implementation of LSB steganography and cryptography using TEA to the security of a text message. The size of this text message may be reduced by performing lossless compression technique using LZW method. The advantages of this method is can provide double security and more messages to be inserted, so it is expected be a good way to exchange information data. The system is able to perform the compression process with an average ratio of 67.42 %. Modified TEA algorithm resulting average value of avalanche effect 53.8%. Average result PSNR of stego image 70.44 dB. As well as average MOS values is 4.8.

This paper presents the relative merits of IR and microwave sensor technology and their combination with wireless camera for the development of a wall mounted wireless intrusion detection system and explain the phases by which the intrusion information are collected and sent to the central control station using wireless mesh network for analysis and processing the collected data. These days every protected zone is facing numerous security threats like trespassing or damaging of important equipments and a lot more. Unwanted intrusion has turned out to be a growing problem which has paved the way for a newer technology which detects intrusion accurately. Almost all organizations have their own conventional arrangement of protecting their zones by constructing high wall, wire fencing, power fencing or employing guard for manual observation. In case of large areas, manually observing the perimeter is not a viable option. To solve this type of problem we have developed a wall-mounted wireless fencing system. In this project I took the responsibility of studying how the different units could be collaborated and how the data collected from them could be further processed with the help of software, which was developed by me. The Intrusion detection system constitutes an important field of application for IR and microwave based wireless sensor network. A state of the art wall-mounted wireless intrusion detection system will detect intrusion automatically, through multi-level detection mechanism (IR, microwave, active RFID & camera) and will generate multi-level alert (buzzer, images, segment illumination, SMS, E-Mail) to notify security officers, owners and also illuminate the particular segment where the intrusion has happened. This system will enable the authority to quickly handle the emergency through identification of the area of incident at once and to take action quickly. IR based perimeter protection is a proven technology. However IR-based intrusion detection system is not a full-proof solution since (1) IR may fail in foggy or dusty weather condition & hence it may generate false alarm. Therefore we amalgamate this technology with Microwave based intrusion detection which can work satisfactorily in foggy weather. Also another significant arena of our proposed system is the Camera-based intrusion detection. Some industries require this feature to capture the snap-shots of the affected location instantly as the intrusion happens. The Intrusion information data are transmitted wirelessly to the control station via multi hop routing (using active RFID or IEEE 802.15.4 protocol). The Control station will receive intrusion information at real time and analyze the data with the help of the Intrusion software. It then sends SMS to the predefined numbers of the respective authority through GSM modem attached with the control station engine.

Many surveillance cameras are using everywhere, the videos or images captured by these cameras are still dumped but they are not processed. Many methods are proposed for tracking and detecting the objects in the videos but we need the meaningful content called semantic content from these videos. Detecting Human activity recognition is quite complex. The proposed method called Semantic Content Extraction (SCE) from videos is used to identify the objects and the events present in the video. This model provides useful methodology for intruder detecting systems which provides the behavior and the activities performed by the intruder. Construction of ontology enhances the spatial and temporal relations between the objects or features extracted. Thus proposed system provides a best way for detecting the intruders, thieves and malpractices happening around us.

Establishing trust relationships between network participants by having them prove their operating system's integrity via a Trusted Platform Module (TPM) provides interesting approaches for securing local networks at a higher level. In the introduced approach on OSI layer 2, attacks carried out by already authenticated and participating nodes (insider threats) can be detected and prevented. Forbidden activities and manipulations in hard- and software, such as executing unknown binaries, loading additional kernel modules or even inserting unauthorized USB devices, are detected and result in an autonomous reaction of each network participant. The provided trust establishment and authentication protocol operates independently from upper protocol layers and is optimized for resource constrained machines. Well known concepts of backbone architectures can maintain the chain of trust between different kinds of network types. Each endpoint, forwarding and processing unit monitors the internal network independently and reports misbehaviours autonomously to a central instance in or outside of the trusted network.

A secure device identifier (DevID) is cryptographically bound to a device and supports authentication of the devices identity. Locally significant identities can be securely associated with an initial manufacturer-provisioned DevID and used in provisioning and authentication protocols toallow a network administrator to establish the trustworthiness of a device and select appropriate policies for transmission and reception of data and control protocols to and from the device.

Denial-of-Service (DoS) and probe attacks are growing more modern and sophisticated in order to evade detection by Intrusion Detection Systems (IDSs) and to increase the potent threat to the availability of network services. Detecting these attacks is quite tough for network operators using misuse-based IDSs because they need to see through attackers and upgrade their IDSs by adding new accurate attack signatures. In this paper, we proposed a novel signal and image processing-based method for detecting network probe and DoS attacks in which prior knowledge of attacks is not required. The method uses a time-frequency representation technique called S-transform, which is an extension of Wavelet Transform, to reveal abnormal frequency components caused by attacks in a traffic signal (e.g., a time-series of the number of packets). Firstly, S-Transform converts the traffic signal to a two-dimensional image which describes time-frequency behavior of the traffic signal. The frequencies that behave abnormally are discovered as abnormal regions in the image. Secondly, Otsu's method is used to detect the abnormal regions and identify time that attacks occur. We evaluated the effectiveness of the proposed method with several network probe and DoS attacks such as port scans, packet flooding attacks, and a low-intensity DoS attack. The results clearly indicated that the method is effective for detecting the probe and DoS attack streams which were generated to real-world Internet.

Sampling and reconstruction (S&R) are used in virtually all areas of science and technology. The classical sampling theorem is a theoretical foundation of S&R. However, for a long time, only sampling rates and ways of the sampled signals representation were derived from it. The fact that the design of S&R circuits (SCs and RCs) is based on a certain interpretation of the sampling theorem was mostly forgotten. The traditional interpretation of this theorem was selected at the time of the theorem introduction because it offered the only feasible way of S&R realization then. At that time, its drawbacks did not manifest themselves. By now, this interpretation has largely exhausted its potential and inhibits future progress in the field. This tutorial expands the theoretical foundation of S&R. It shows that the traditional interpretation, which is indirect, can be replaced by the direct one or by various combinations of the direct and indirect interpretations that enable development of novel SCs and RCs (NSCs and NRCs) with advanced properties. The tutorial explains the basic principles of the NSCs and NRCs design, their advantages, as well as theoretical problems and practical challenges of their realization. The influence of the NSCs and NRCs on the architectures of SDRs and CRs is also discussed.

In the present paper, we present our approach for the transformation of workflow applications based on institution theory. The workflow application is modeled with UML Activity Diagram(UML AD). Then, for a formal verification purposes, the graphical model will be translated to an Event-B specification. Institution theory will be used in two levels. First, we defined a local semantic for UML AD and Event B specification using a categorical description of each one. Second, we defined institution comorphism to link the two defined institutions. The theoretical foundations of our approach will be studied in the same mathematical framework since the use of institution theory. The resulted Event-B specification, after applying the transformation approach, will be used for the formal verification of functional proprieties and the verification of absences of problems such deadlock. Additionally, with the institution comorphism, we define a semantic correctness and coherence of the model transformation.

Demand response management (DRM) is one of the main features in smart grid, which is realized via communications between power providers and consumers. Due to the vulnerabilities of communication channels, communication is not perfect in practice and will be threatened by jamming attack. In this paper, we consider jamming attack in the wireless communication for smart grid. Firstly, the DRM performance degradation introduced by unreliable communication is fully studied. Secondly, a regret matching based anti-jamming algorithm is proposed to enhance the performance of communication and DRM. Finally, numerical results are presented to illustrate the impacts of unreliable communication on DRM and the performance of the proposed anti-jamming algorithm.

The unified power flow controller (UPFC) has attracted much attention recently because of its capability in controlling the active and reactive power flows. The normal operation of UPFC is dependent on both its physical part and the associated cyber system. Thus malicious cyber attacks may impact the reliability of UPFC. As more information and communication technologies are being integrated into the current power grid, more frequent occurrences of cyber attacks are possible. In this paper, the cyber architecture of UPFC is analyzed, and the possible attack scenarios are considered and discussed. Based on the interdependency of the physical part and the cyber part, an integrated reliability model for UPFC is proposed and analyzed. The impact of UPFC on the overall system reliability is examined, and it is shown that cyber attacks against UPFC may yield an adverse influence.

Today's more reliable communication technology, together with the availability of higher computational power, have paved the way for introduction of more advanced automation systems based on distributed intelligence and multi-agent technology. However, abundance of data, while making these systems more powerful, can at the same time act as their biggest vulnerability. In a web of interconnected devices and components functioning within an automation framework, potential impact of malfunction in a single device, either through internal failure or external damage/intrusion, may lead to detrimental side-effects spread across the whole underlying system. The potentially large number of devices, along with their inherent interrelations and interdependencies, may hinder the ability of human operators to interpret events, identify their scope of impact and take remedial actions if necessary. Through utilization of the concepts of graph-theoretic fuzzy cognitive maps (FCM) and expert systems, this paper puts forth a solution that is able to reveal weak links and vulnerabilities of an automation system, should it become exposed to partial internal failure or external damage. A case study has been performed on the IEEE 34-bus test distribution system to show the efficiency of the proposed scheme.

The security issue of complex networks has drawn significant concerns recently. While pure topological analyzes from a network security perspective provide some effective techniques, their inability to characterize the physical principles requires a more comprehensive model to approximate failure behavior of a complex network in reality. In this paper, based on an extended topological metric, we proposed an approach to examine the vulnerability of a specific type of complex network, i.e., the power system, against cascading failure threats. The proposed approach adopts a model called extended betweenness that combines network structure with electrical characteristics to define the load of power grid components. By using this power transfer distribution factor-based model, we simulated attacks on different components (buses and branches) in the grid and evaluated the vulnerability of the system components with an extended topological cascading failure simulator. Influence of different loading and overloading situations on cascading failures was also evaluated by testing different tolerance factors. Simulation results from a standard IEEE 118-bus test system revealed the vulnerability of network components, which was then validated on a dc power flow simulator with comparisons to other topological measurements. Finally, potential extensions of the approach were also discussed to exhibit both utility and challenge in more complex scenarios and applications.

Wireless sensor networks extend people's ability to explore, monitor, and control the physical world. Wireless sensor networks are susceptible to certain types of attacks because they are deployed in open and unprotected environments. Novel intrusion tolerance architecture is proposed in this paper. An expert intrusion detection analysis system and an all-channel analyzer are introduced. A proposed intrusion tolerance scheme is implemented. Results show that this scheme can detect data traffic and re-route it to a redundant node in the wireless network, prolong the lifetime of the network, and isolate malicious traffic introduced through compromised nodes or illegal intrusions.

Remote data integrity checking is of crucial importance in cloud storage. It can make the clients verify whether their outsourced data is kept intact without downloading the whole data. In some application scenarios, the clients have to store their data on multicloud servers. At the same time, the integrity checking protocol must be efficient in order to save the verifier's cost. From the two points, we propose a novel remote data integrity checking model: ID-DPDP (identity-based distributed provable data possession) in multicloud storage. The formal system model and security model are given. Based on the bilinear pairings, a concrete ID-DPDP protocol is designed. The proposed ID-DPDP protocol is provably secure under the hardness assumption of the standard CDH (computational Diffie-Hellman) problem. In addition to the structural advantage of elimination of certificate management, our ID-DPDP protocol is also efficient and flexible. Based on the client's authorization, the proposed ID-DPDP protocol can realize private verification, delegated verification, and public verification.

After the occurrence of numerous worldwide financial scandals, the importance of related issues such as internal control and information security has greatly increased. This study develops an internal control framework that can be applied within an enterprise resource planning (ERP) system. A literature review is first conducted to examine the necessary forms of internal control in information technology (IT) systems. The control criteria for the establishment of the internal control framework are then constructed. A case study is conducted to verify the feasibility of the established framework. This study proposes a 12-dimensional framework with 37 control items aimed at helping auditors perform effective audits by inspecting essential internal control points in ERP systems. The proposed framework allows companies to enhance IT audit efficiency and mitigates control risk. Moreover, companies that refer to this framework and consider the limitations of their own IT management can establish a more robust IT management mechanism.

There is an increasing need for wireless sensor networks (WSNs) to be more tightly integrated with the Internet. Several real world deployment of stand-alone wireless sensor networks exists. A number of solutions have been proposed to address the security threats in these WSNs. However, integrating WSNs with the Internet in such a way as to ensure a secure End-to-End (E2E) communication path between IPv6 enabled sensor networks and the Internet remains an open research issue. In this paper, the 6LoWPAN adaptation layer was extended to support both IPsec's Authentication Header (AH) and Encapsulation Security Payload (ESP). Thus, the communication endpoints in WSNs are able to communicate securely using encryption and authentication. The proposed AH and ESP compressed headers performance are evaluated via test-bed implementation in 6LoWPAN for IPv6 communications on IEEE 802.15.4 networks. The results confirm the possibility of implementing E2E security in IPv6 enabled WSNs to create a smooth transition between WSNs and the Internet. This can potentially play a big role in the emerging "Internet of Things" paradigm.

This paper proposes and describes an active authentication model based on user profiles built from user-issued commands when interacting with GUI-based application. Previous behavioral models derived from user issued commands were limited to analyzing the user's interaction with the *Nix (Linux or Unix) command shell program. Human-computer interaction (HCI) research has explored the idea of building users profiles based on their behavioral patterns when interacting with such graphical interfaces. It did so by analyzing the user's keystroke and/or mouse dynamics. However, none had explored the idea of creating profiles by capturing users' usage characteristics when interacting with a specific application beyond how a user strikes the keyboard or moves the mouse across the screen. We obtain and utilize a dataset of user command streams collected from working with Microsoft (MS) Word to serve as a test bed. User profiles are first built using MS Word commands and identification takes place using machine learning algorithms. Best performance in terms of both accuracy and Area under the Curve (AUC) for Receiver Operating Characteristic (ROC) curve is reported using Random Forests (RF) and AdaBoost with random forests.

Sensors of diverse capabilities and modalities, carried by us or deeply embedded in the physical world, have invaded our personal, social, work, and urban spaces. Our relationship with these sensors is a complicated one. On the one hand, these sensors collect rich data that are shared and disseminated, often initiated by us, with a broad array of service providers, interest groups, friends, and family. Embedded in this data is information that can be used to algorithmically construct a virtual biography of our activities, revealing intimate behaviors and lifestyle patterns. On the other hand, we and the services we use, increasingly depend directly and indirectly on information originating from these sensors for making a variety of decisions, both routine and critical, in our lives. The quality of these decisions and our confidence in them depend directly on the quality of the sensory information and our trust in the sources. Sophisticated adversaries, benefiting from the same technology advances as the sensing systems, can manipulate sensory sources and analyze data in subtle ways to extract sensitive knowledge, cause erroneous inferences, and subvert decisions. The consequences of these compromises will only amplify as our society increasingly complex human-cyber-physical systems with increased reliance on sensory information and real-time decision cycles.Drawing upon examples of this two-faceted relationship with sensors in applications such as mobile health and sustainable buildings, this talk will discuss the challenges inherent in designing a sensor information flow and processing architecture that is sensitive to the concerns of both producers and consumer. For the pervasive sensing infrastructure to be trusted by both, it must be robust to active adversaries who are deceptively extracting private information, manipulating beliefs and subverting decisions. While completely solving these challenges would require a new science of resilient, secure and trustworthy networked sensing and decision systems that would combine hitherto disciplines of distributed embedded systems, network science, control theory, security, behavioral science, and game theory, this talk will provide some initial ideas. These include an approach to enabling privacy-utility trade-offs that balance the tension between risk of information sharing to the producer and the value of information sharing to the consumer, and method to secure systems against physical manipulation of sensed information.

Cyber intrusions to substations of a power grid are a source of vulnerability since most substations are unmanned and with limited protection of the physical security. In the worst case, simultaneous intrusions into multiple substations can lead to severe cascading events, causing catastrophic power outages. In this paper, an integrated Anomaly Detection System (ADS) is proposed which contains host- and network-based anomaly detection systems for the substations, and simultaneous anomaly detection for multiple substations. Potential scenarios of simultaneous intrusions into the substations have been simulated using a substation automation testbed. The host-based anomaly detection considers temporal anomalies in the substation facilities, e.g., user-interfaces, Intelligent Electronic Devices (IEDs) and circuit breakers. The malicious behaviors of substation automation based on multicast messages, e.g., Generic Object Oriented Substation Event (GOOSE) and Sampled Measured Value (SMV), are incorporated in the proposed network-based anomaly detection. The proposed simultaneous intrusion detection method is able to identify the same type of attacks at multiple substations and their locations. The result is a new integrated tool for detection and mitigation of cyber intrusions at a single substation or multiple substations of a power grid.

Cloud computing is a distributed architecture that has shared resources, software, and information. There exists a great number of implementations and research for Intrusion Detection Systems (IDS) in grid and cloud environments, however they are limited in addressing the requirements for an ideal intrusion detection system. Security issues in Cloud Computing (CC) have become a major concern to its users, availability being one of the key security issues. Distributed Denial of Service (DDoS) is one of these security issues that poses a great threat to the availability of the cloud services. The aim of this research is to evaluate the performance of IDS in CC when the DDoS attack is detected in a private cloud, named Saa SCloud. A model has been implemented on three virtual machines, Saa SCloud Model, DDoS attack Model, and IDSServer Model. Through this implementation, Service Intrusion Detection System in Cloud Computing (SIDSCC) will be proposed, investigated and evaluated.

An improved harmony search algorithm is presented for solving continuous optimization problems in this paper. In the proposed algorithm, an elimination principle is developed for choosing from the harmony memory, so that the harmonies with better fitness will have more opportunities to be selected in generating new harmonies. Two key control parameters, pitch adjustment rate (PAR) and bandwidth distance (bw), are dynamically adjusted to favor exploration in the early stages and exploitation during the final stages of the search process with the different search spaces of the optimization problems. Numerical results of 12 benchmark problems show that the proposed algorithm performs more effectively than the existing HS variants in finding better solutions.

Wireless sensor and actuator networks (WSAN) constitute an emerging technology with multiple applications in many different fields. Due to the features of WSAN (dynamism, redundancy, fault tolerance, and self-organization), this technology can be used as a supporting technology for the monitoring of critical infrastructures (CIs). For decades, the monitoring of CIs has centered on supervisory control and data acquisition (SCADA) systems, where operators can monitor and control the behavior of the system. The reach of the SCADA system has been hampered by the lack of deployment flexibility of the sensors that feed it with monitoring data. The integration of a multihop WSAN with SCADA for CI monitoring constitutes a novel approach to extend the SCADA reach in a cost-effective way, eliminating this handicap. However, the integration of WSAN and SCADA presents some challenges which have to be addressed in order to comprehensively take advantage of the WSAN features. This paper presents a solution for this joint integration. The solution uses a gateway and a Web services approach together with a Web-based SCADA, which provides an integrated platform accessible from the Internet. A real scenario where this solution has been successfully applied to monitor an electrical power grid is presented.

To keep malware out of mobile application markets, existing techniques analyze the security aspects of application behaviors and summarize patterns of these security aspects to determine what applications do. However, user expectations (reflected via user perception in combination with user judgment) are often not incorporated into such analysis to determine whether application behaviors are within user expectations. This poster presents our recent work on bridging the semantic gap between user perceptions of the application behaviors and the actual application behaviors.

One of the biggest challenges in mobile security is human behavior. The most secure password may be useless if it is sent as a text or in an email. The most secure network is only as secure as its most careless user. Thus, in the current project we sought to discover the conditions under which users of mobile devices were most likely to make security errors. This scaffolds a larger project where we will develop automatic ways of detecting such environments and eventually supporting users during these times to encourage safe mobile behaviors.

The InViz tool is a functional prototype that provides graphical visualizations of log file events to support real-time attack investigation. Through visualization, both experts and novices in cybersecurity can analyze patterns of application behavior and investigate potential cybersecurity attacks. The goal of this research is to identify and evaluate the cybersecurity information to visualize that reduces the amount of time required to perform cyber forensics.