Biblio

With the challenge of the vast amount of data generated by devices at the edge of networks, new architecture needs a well-established data service model that accounts for privacy concerns. This paper presents an architecture of data transmission and a data portfolio with privacy for fog-to-cloud (DPPforF2C). We would like to propose a practical data model with privacy from a digitalized information perspective at fog nodes. In addition, we also propose an architecture for implicating the privacy of DPPforF2C used in fog computing. Technically, we design a data portfolio based on the Message Queuing Telemetry Transport (MQTT) and the Advanced Message Queuing Protocol (AMQP). We aim to propose sample data models with privacy architecture because there are some differences in the data obtained from IoT devices and sensors. Thus, we propose an architecture with the privacy of DPPforF2C for publishing data from edge devices to fog and to cloud servers that could be applied to fog architecture in the future.

This article describes an approach to identification and certification in decentralized environment. The protocol proposes a way of integration for blockchain technology and web-of-trust concept to create decentralized public key infrastructure with flexible management for user identificators. Besides changing the current public key infrastructure, this system can be used in the Internet of Things (IoT). Each individual IoT sensor must correctly communicate with other components of the system it's in. To provide safe interaction, components should exchange encrypted messages with ability to check their integrity and authenticity, which is presented by this scheme.

Devices on the Internet of Things (IoT) are usually battery-powered and have limited resources. Hence, energy-efficient and lightweight protocols were designed for IoT devices, such as the popular Constrained Application Protocol (CoAP). Yet, CoAP itself does not include any defenses against denial-of-sleep attacks, which are attacks that aim at depriving victim devices of entering low-power sleep modes. For example, a denial-of-sleep attack against an IoT device that runs a CoAP server is to send plenty of CoAP messages to it, thereby forcing the IoT device to expend energy for receiving and processing these CoAP messages. All current security solutions for CoAP, namely Datagram Transport Layer Security (DTLS), IPsec, and OSCORE, fail to prevent such attacks. To fill this gap, Seitz et al. proposed a method for filtering out inauthentic and replayed CoAP messages "en-route" on 6LoWPAN border routers. In this paper, we expand on Seitz et al.'s proposal in two ways. First, we revise Seitz et al.'s software architecture so that 6LoWPAN border routers can not only check the authenticity and freshness of CoAP messages, but can also perform a wide range of further checks. Second, we propose a couple of such further checks, which, as compared to Seitz et al.'s original checks, more reliably protect IoT devices that run CoAP servers from remote denial-of-sleep attacks, as well as from remote exploits. We prototyped our solution and successfully tested its compatibility with Contiki-NG's CoAP implementation.

Security is a critical issue for new car generation targeting intelligent transportation systems (ITS), involving autonomous and connected vehicles. In this work we designed a low cost CAN probe and defined analysis tools in order to build attack scenarios. We reuse some threats identified by a previous work. Future researches will address new security protocols.

Industry 4.0 or the fourth industrial revolution encapsulates future industry development trends to achieve more intelligent manufacturing processes, including reliance on Cyber Physical Systems (CPS). The increase in online access and control given by the incorporation of CPSs introduces a new challenge securing the operations of the CPS in that they are not supported by standard security protocols. This paper describes a process used to effectively protect the operations of an IIoT system by implementing security protocols on the CPS within the IIoT. A series of predefined boundary conditions of the safety critical parameters for which a heating and cooling CPS can safely operate within were established. If the CPS is commended to operate outside of these boundaries, it will disconnect from all external communication network and default to some pre-defined safe-operation mode until the system has been evaluated locally by an administrator and released from the safe-mode. This method was tested and validated by establishing a sample IIoT and CPS testbed setup which monitor and control the temperature of a target environment. An attack was initiated to force the target environment outside of the determined safety-critical parameters. The system responded by disabling all network ports and defaulted to the safe-operation mode established previously.

The Internet of Things (IoT) is rapidly emerging as one of the dominant computing paradigms of this decade. Applications range from in-home entertainment to large-scale industrial deployments such as controlling assembly lines and monitoring traffic. While IoT devices are in many respects similar to traditional computers, user expectations and deployment scenarios as well as cost and hardware constraints are sufficiently different to create new security challenges as well as new opportunities. This is especially true for large-scale IoT deployments in which a central entity deploys and controls a large number of IoT devices with minimal human interaction. Like traditional computers, IoT devices are subject to attack and compromise. Large IoT deployments consisting of many nearly identical devices are especially attractive targets. At the same time, recovery from root compromise by conventional means becomes costly and slow, even more so if the devices are dispersed over a large geographical area. In the worst case, technicians have to travel to all devices and manually recover them. Data center solutions such as the Intelligent Platform Management Interface (IPMI) which rely on separate service processors and network connections are not only not supported by existing IoT hardware, but are unlikely to be in the foreseeable future due to the cost constraints of mainstream IoT devices. This paper presents CIDER, a system that can recover IoT devices within a short amount of time, even if attackers have taken root control of every device in a large deployment. The recovery requires minimal manual intervention. After the administrator has identified the compromise and produced an updated firmware image, he/she can instruct CIDER to force the devices to reset and to install the patched firmware on the devices. We demonstrate the universality and practicality of CIDER by implementing it on three popular IoT platforms (HummingBoard Edge, Raspberry Pi Compute Module 3 and Nucleo-L476RG) spanning the range from high to low end. Our evaluation shows that the performance overhead of CIDER is generally negligible.

The edge and fog computing paradigms enable more responsive and smarter systems without relying on cloud servers for data processing and storage. This reduces network load as well as latency. Nonetheless, the addition of new layers in the network architecture increases the number of security vulnerabilities. In privacy-critical systems, the appearance of new vulnerabilities is more significant. To cope with this issue, we propose and implement an Ethereum Blockchain based architecture with edge artificial intelligence to analyze data at the edge of the network and keep track of the parties that access the results of the analysis, which are stored in distributed databases.

Data security is the main challenge in Internet of Things (IoT) applications. Security strength and the immunity to security attacks depend mainly on the available power budget. The power-security level trade-off is the main challenge for low power IoT applications, especially, energy limited IoT applications. In this paper, multiple encryption modes that provide different power consumption and security level values are hardware implemented. In other words, some modes provide high security levels at the expense of high power consumption and other modes provide low power consumption with low security level. Dynamic Partial Reconfiguration (DPR) is utilized to adaptively configure the hardware security module based on the available power budget. For example, for a given power constraint, the DPR controller configures the security module with the security mode that meets the available power constraint. ZC702 evaluation board is utilized to implement the proposed encryption modes using DPR. A Lightweight Authenticated Cipher (ACORN) is the most suitable encryption mode for low power IoT applications as it consumes the minimum power and area among the selected candidates at the expense of low throughput. The whole DPR system is tested with a maximum dynamic power dissipation of 10.08 mW. The suggested DPR system saves about 59.9% of the utilized LUTs compared to the individual implementation of the selected encryption modes.

The intense incursion of the Internet of Things (IoT) into all areas of modern life has led to a need for a more detailed study of these technologies and their mechanisms of work. It is necessary to study mechanisms in order to improve QoS, security, identifying shortest routes, mobility, etc. This paper proposes an enhanced simulation framework that implements an improved mechanism for prioritising traffic on 6LoWPAN networks and the realisation of micro-mobility.

The advent of high performance fog and edge computing and high bandwidth connectivity has brought about changes to Internet-of-Things (IoT) service architectures, allowing for greater quantities of high quality information to be extracted from their environments to be processed. However, recently introduced international regulations, along with heightened awareness among consumers, have strengthened requirements to ensure data security, with significant financial and reputational penalties for organisations who fail to protect customers' data. This paper proposes the leveraging of fog and edge computing to facilitate processing of confidential user data, to reduce the quantity and availability of raw confidential data at various levels of the IoT architecture. This ultimately reduces attack surface area, however it also increases efficiency of the architecture by distributing processing amongst nodes and transmitting only processed data. However, such an approach is vulnerable to device level attacks. To approach this issue, a proposed System Security Manager is used to continuously monitor system resources and ensure confidential data is confined only to parts of the device that require it. In event of an attack, critical data can be isolated and the system informed, to prevent data confidentiality breach.

With the current significant penetration of mobile devices (i.e. smartphones and tablets) and the tremendous increase in the number of the corresponding mobile applications, they have become an indispensable part of our lives. Nowadays, there is a significant growth in the number of sensitive applications such as personal health applications, personal financial applications, home monitoring applications, etc. In addition, with the significant growth of Internet-of-Things (IoT) devices, smartphones and the corresponding applications are widely considered as the Internet gateways for these devices. Mobile devices mostly use wireless LANs (WLANs) (i.e., WiFi networks) as the prominent network interface to the Internet. However, due to the broadcast nature of WiFi links, wireless traffics are exposed to any eavesdropping adversary within the WLAN. Despite WiFi encryption, studies show that application usage information could be inferred from the encrypted wireless traffic. The leakage of this sensitive information is very serious issue that will significantly impact users' privacy and security. In addressing this privacy concern, we design and develop a lightweight programmable privacy framework, called PrivacyGuard. PrivacyGuard is inspired by the vision of pushing the Software Defined Network (SDN)-like paradigm all the way to wireless network edge, is designed to support of adopting privacy preserving policies to protect the wireless communication of the sensitive applications. In this paper, we demonstrate and evaluate a prototype of PrivacyGuard framework on Android devices showing the flexibility and efficiency of the framework.

The systematic integration of the Internet of Things (IoT) and Cyber-Physical Systems (CPS) into the supply chain to increase operational efficiency and quality has also introduced new complexities to the threat landscape. The myriad of sensors could increase data collection capabilities for businesses to facilitate process automation aided by Artificial Intelligence (AI) but without adopting an appropriate Security-by-Design framework, threat detection and response are destined to fail. The emerging concept of Smart Workplace incorporates many CPS (e.g. Robots and Drones) to execute tasks alongside Employees both of which can be exploited as Insider Threats. We introduce and discuss forensic-readiness, liability attribution and the ability to track moving Smart SPS Objects to support modern Digital Forensics and Incident Response (DFIR) within a defence-in-depth strategy. We present a framework to facilitate the tracking of object behaviour within Smart Controlled Business Environments (SCBE) to support resilience by enabling proactive insider threat detection. Several components of the framework were piloted in a company to discuss a real-life case study and demonstrate anomaly detection and the emerging of behavioural patterns according to objects' movement with relation to their job role, workspace position and nearest entry or exit. The empirical data was collected from a Bluetooth-based Proximity Monitoring Solution. Furthermore, a key strength of the framework is a federated Blockchain (BC) model to achieve forensic-readiness by establishing a digital Chain-of-Custody (CoC) and a collaborative environment for CPS to qualify as Digital Witnesses (DW) to support post-incident investigations.

With the recent proliferation of Internet of Things (IoT) and embedded devices, there is a growing need to develop a security framework to protect such devices. RISC-V is a promising open source architecture that targets low-power embedded devices and SoCs. However, there is a dearth of practical and low-overhead security solutions in the RISC-V architecture. Programs compiled using RISC-V toolchains are still vulnerable to code injection and code reuse attacks such as buffer overflow and return-oriented programming (ROP). In this paper, we propose FIXER, a hardware implemented security extension to RISC-V that provides a defense mechanism against such attacks. FIXER enforces fine-grained control-flow integrity (CFI) of running programs on backward edges (returns) and forward edges (calls) without requiring any architectural modifications to the RISC-V processor core. We implement FIXER on RocketChip, a RISC-V SoC platform, by leveraging the integrated Rocket Custom Coprocessor (RoCC) to detect and prevent attacks. Compared to existing software based solutions, FIXER reduces energy overhead by 60% at minimal execution time (1.5%) and area (2.9%) overheads.

The exponential growth of Internet-of-Things (IoT) devices not only brings convenience but also poses numerous challenging safety and security issues. IoT devices are distributed, highly heterogeneous, and more importantly, directly interact with the physical environment. In IoT systems, the bugs in device firmware, the defects in network protocols, and the design flaws in system configurations all may lead to catastrophic accidents, causing severe threats to people's lives and properties. The challenge gets even more escalated as the possible attacks may be chained together in a long sequence across multiple layers, rendering the current vulnerability analysis inapplicable. In this paper, we present ForeSee, a cross-layer formal framework to comprehensively unveil the vulnerabilities in IoT systems. ForeSee generates a novel attack graph that depicts all of the essential components in IoT, from low-level physical surroundings to high-level decision-making processes. The corresponding graph-based analysis then enables ForeSee to precisely capture potential attack paths. An optimization algorithm is further introduced to reduce the computational complexity of our analysis. The illustrative case studies show that our multilayer modeling can capture threats ignored by the previous approaches.

Internet of Things (IoT) revolution in 5th Generation (5G) will dynamically support all user, devices and customer worldwide where these devices, mechanical and digital machines will be connected and are able to communicate and transfer data over the network. In industries, the evolution of these technologies, known as Industrial IoT (IIoT) will enable machines to be connected and communicate where else, Internet of Everything (IoE) makes the connection more relevant between all smart devices, machines and also people with a huge data, high speed and high security. The growth of these technologies has made Radio Frequency (RF) spectrum resources for wireless communication to be more saturated. In order to solve this problem, new wireless communication technologies are proposed to meet the demand and also to enhance the performance of the system and overcome the existing bandwidth limitations. Studies done shows that Light-Fidelity (Li-Fi), based on Visible Light Communications (VLC) is one of the most promising technology in future which is based on optical wireless communication. Initial study on the Li-Fi concept has focuses on achieving speed, bi-directional transmission concept and supports multiuser access. In this paper we propose a frame work focuses on the handover process for indoor environment by using the steerable Access Point (AP) and compare the output result with fix Access Point.

There are some registry agreements that may be appropriate for the Internet of Things (IoT), including Bitcoin, Hyperledger Fabric and IOTA. This article presents quickly and examines them in terms of the progress of Internet applications. Block-dependent IoT applications can consolidate the chain's rationale (smart contracts) and front-end, portable or front-end web applications. We present three possible designs for BC IoT front-end applications. They vary depending on the Bitcoin block chain customer (neighborhood gadget, remote server) and the key location needed to manage active exchanges. The vital requirements of these projects, which use Bitcoin to organize constructive exchanges, are the volumes of information, the area and time of the complete block and block block, and the entry of the Bitcoin store. The implications of these surveys show that it is unlikely that a full Bitcoin distributor will continue to operate reliably with a mandatory IoT gadget. Then, designing with remote Bitcoin customers is, in all respects, a suitable methodology in which there are two minor alternatives and vary in key storage / management. Similarly, we recommend using the design with a unique match between the IoT gadget and the remote blockchain client to reduce system activity and improve security. We hope you also have the ability to operate with versatile verses with low control and low productivity. Our review eliminates the contradictions between synthesis methodologies, but the final choice for a particular registration agreement and the original technique completely depends on the proposed use case.

This paper presents the vision of establishing a global service for Global IoT Device Discovery and Integration (GIDDI). The establishment of a GIDDI will: (1) make IoT application development more efficient and cost-effective via enabling sharing and reuse of existing IoT devices owned and maintained by different providers, and (2) promote deployment of new IoT devices supported by a revenue generation scheme for their providers. More specifically, this paper proposes a distributed IoT blockchain ledger that is specifically designed for managing the metadata needed to describe IoT devices and the data they produce. This GIDDI Blockchain is Internet-owned (i.e., it is not controlled by any individual or organization) and is Internet-scaled (i.e., it can support the discovery and reuse billions of IoT devices). The paper also proposes a GIDDI Marketplace that provides the functionality needed for IoT device registration, query, integration, payment and security via the proposed GIDDI Blockchain. We outline the GIDDI Blockchain and Marketplace implementation. We also discuss ongoing research for automatically mining the IoT Device metadata needed for IoT Device query and integration from the data produce. This significantly reduces the need for IoT device providers to supply the metadata descriptions the devices and the data they produce during the registration of IoT Devices in the GIDDI Blockchain.

This paper presents an implementation of a Graphical User Interface (GUI) for the OpenThread software. OpenThread is a software package for Thread. Thread is a networking protocol for Internet of Things (IoT) designed for home automation. OpenThread package was released by Nest Labs as an open source implementation of the Thread specification v1.1.1. The OpenThread includes IPv6, 6LoWPAN, IEEE 802.15.4 with MAC security, Mesh Link Establishment, and Mesh Routing. OpenThread includes all Thread supported device types and supports both SOC and NCP implementations. OpenThread runs on Linux and allows the users to use it as a simulator with a command line interface. This research is focused on adding a Graphical User Interface (GUI) to the OpenThread. The GUI package is implemented in TCL/Tk (Tool Control Language). OpenThread with a GUI makes working with OpenThread much easier for researchers and students. The GUI also makes it easier to visualize the Thread network and its operations.

Advancement in communication technologies and the Internet of Things (IoT) is driving adoption in smart cities that aims to increase operational efficiency and improve the quality of services and citizen welfare, among other potential benefits. The privacy, reliability, and integrity of communications must be ensured so that actions can be appropriate, safe, accurate, and implemented promptly after receiving actionable information. In this work, we present a multi-tier methodology consisting of an authentication and trust-building/distribution framework designed to ensure the safety and validity of the information exchanged in the system. Blockchain protocols and Radio Frequency-Distinct Native Attributes (RF-DNA) combine to provide a hardware-software codesigned system for enhanced device identity and overall system trustworthiness. Our threat model accounts for counterfeiting, breakout fraud, and bad mouthing of one entity by others. Entity trust (e.g., IoT devices) depends on quality and level of participation, quality of messages, lifetime of a given entity in the system, and the number of known "bad" (non-consensus) messages sent by that entity. Based on this approach to trust, we are able to adjust trust upward and downward as a function of real-time and past behavior, providing other participants with a trust value upon which to judge information from and interactions with the given entity. This approach thereby reduces the potential for manipulation of an IoT system by a bad or byzantine actor.

Internet of Things (IoT) impacts the current network with many challenges due to the variation, heterogeneity of its devices and running technologies. For those reasons, monitoring and controlling network efficiently can rise the performance of the network and adapts network techniques according to environment measurements. This paper proposes a new privacy aware-IoT architecture that combines the benefits of both Information Centric Network (ICN) and Software Defined Network (SDN) paradigms. In this architecture controlling functionalities are distributed over multiple planes: operational plane which is considered as smart ICN data plane with Controllers that control local clusters, tactical plane which is an Edge environment to take controlling decisions based on small number of clusters, and strategic plane which is a cloud controlling environment to make long-term decision that affects the whole network. Deployment options of this architecture is discussed and SDN enhancement due to in-network caching is evaluated.

The Industrial Control System (ICS) and Supervisory Control and Data Acquisition (SCADA) systems are the backbones for monitoring and supervising factories, power grids, water distribution systems, nuclear plants, and other critical infrastructures. These systems are installed by third party contractors, maintained by site engineers, and operate for a long time. This makes tracing the documentation of the systems' changes and updates challenging since some of their components' information (type, manufacturer, model, etc.) may not be up-to-date, leading to possibly unaccounted security vulnerabilities in the systems. Device recognition is useful first step in vulnerability identification and defense augmentation, but due to the lack of full traceability in case of legacy ICS/SCADA systems, the typical device recognition based on document inspection is not applicable. In this paper, we propose a hybrid approach involving the mix of communication-patterns and passive-fingerprinting to identify the unknown devices' types, manufacturers, and models. The algorithm uses the ICS/SCADA devices's communication-patterns to recognize the control hierarchy levels of the devices. In conjunction, certain distinguishable features in the communication-packets are used to recognize the device manufacturer, and model. We have implemented this hybrid approach in Python, and tested on traffic data from a water treatment SCADA testbed in Singapore (iTrust).

SCADA/ICS (Supervisory Control and Data Acqui-sition/Industrial Control Systems) networks are becoming targets of advanced multi-faceted attacks, and use of attack-graphs has been proposed to model complex attacks scenarios that exploit interdependence among existing atomic vulnerabilities to stitch together the attack-paths that might compromise a system-level security property. While such analysis of attack scenarios enables security administrators to establish appropriate security measurements to secure the system, practical considerations on time and cost limit their ability to address all system vulnerabilities at once. In this paper, we propose an approach that identifies label-cuts to automatically identify a set of critical-attacks that, when blocked, guarantee system security. We utilize the Strongly-Connected-Components (SCCs) of the given attack graph to generate an abstracted version of the attack-graph, a tree over the SCCs, and next use an iterative backward search over this tree to identify set of backward reachable SCCs, along with their outgoing edges and their labels, to identify a cut with a minimum number of labels that forms a critical-attacks set. We also report the implementation and validation of the proposed algorithm to a real-world case study, a SCADA network for a water treatment cyber-physical system.

This paper deals with electromagnetic vibration excitation of rotating machine blades in a purpose of dynamic measurement and testing. A novel method for increasing the excitation force is presented. At the same time, the suggested method allows to reduce blade remanent induction. Examples of measurements are shown, and obtained results are discussed.

The heart of the Internet of Things (IoT) is data. IoT services processes data from sensors that interface their physical surroundings, and from other software such as Internet weather databases. They produce data to control physical environments via actuators, and offer data to other services. More recently, service-centric designs for managing the IoT have been proposed. Data-centric or name-based communication architectures complement these developments very well. Especially for edge-based or site-local installations, data-centric Internet architectures can be implemented already today, as they do not require any changes at the core. We present the Virtual State Layer (VSL), a site-local data-centric architecture for the IoT. Special features of our solution are full separation of logic and data in IoT services, offering the data-centric VSL interface directly to developers, which significantly reduces the overall system complexity, explicit data modeling, a semantically-rich data item lookup, stream connections between services, and security-by-design. We evaluate our solution regarding usability, performance, scalability, resilience, energy efficiency, and security.

The safety management is an important and fundamental task in the construction and operation of pumped-storage power stations. However, because of the traditional technical framework, the relevant systems are separated from each other, leading to a lot of disadvantages in application and performance. In order to meet the requirements of smart pumped-storage power stations, an integrated safety management system (ISMS) based on ubiquitous internet of things in electricity is proposed in this paper. The ISMS is divided into five layers including data display layer, data manipulation layer, data processing layer, data transmission layer and data acquisition layer. It consists of six modules, i.e., central control module, cave access control and personnel location module, video and security monitoring module, emergency broadcasting and communication module, geological warning module, and fall protection module. All modules are integrated into a unified information platform.