Biblio

Internet of things (IOT) is a kind of advanced information technology which has drawn societies' attention. Sensors and stimulators are usually recognized as smart devices of our environment. Simultaneously IOT security brings up new issues. Internet connection and possibility of interaction with smart devices cause those devices to involve more in human life. Therefore, safety is a fundamental requirement in designing IOT. IOT has three remarkable features: overall perception, reliable transmission and intelligent processing. Because of IOT span, security of conveying data is an essential factor for system security. Hybrid encryption technique is a new model that can be used in IOT. This type of encryption generates strong security and low computation. In this paper, we have proposed a hybrid encryption algorithm which has been conducted in order to reduce safety risks and enhancing encryption's speed and less computational complexity. The purpose of this hybrid algorithm is information integrity, confidentiality, non-repudiation in data exchange for IOT. Eventually suggested encryption algorithm has been simulated by MATLAB software and its speed and safety efficiency were evaluated in comparison with conventional encryption algorithm.

With an aim of provisioning fast, reliable and low cost services to the users, the cloud-computing technology has progressed leaps and bounds. But, adjacent to its development is ever increasing ability of malicious users to compromise its security from outside as well as inside. The Network Intrusion Detection System (NIDS) techniques has gone a long way in detection of known and unknown attacks. The methods of detection of intrusion and deployment of NIDS in cloud environment are dependent on the type of services being rendered by the cloud. It is also important that the cloud administrator is able to determine the malicious intensions of the attackers and various methods of attack. In this paper, we carry out the integration of NIDS module and Honeypot Networks in Cloud environment with objective to mitigate the known and unknown attacks. We also propose method to generate and update signatures from information derived from the proposed integrated model. Using sandboxing environment, we perform dynamic malware analysis of binaries to derive conclusive evidence of malicious attacks.

In Wyner wiretap II model of communication, Alice and Bob are connected by a channel that can be eavesdropped by an adversary with unlimited computation who can select a fraction of communication to view, and the goal is to provide perfect information theoretic security. Information theoretic security is increasingly important because of the threat of quantum computers that can effectively break algorithms and protocols that are used in today's public key infrastructure. We consider interactive protocols for wiretap II channel with active adversary who can eavesdrop and add adversarial noise to the eavesdropped part of the codeword. These channels capture wireless setting where malicious eavesdroppers at reception distance of the transmitter can eavesdrop the communication and introduce jamming signal to the channel. We derive a new upperbound R ≤ 1 - ρ for the rate of interactive protocols over two-way wiretap II channel with active adversaries, and construct a perfectly secure protocol family with achievable rate 1 - 2ρ + ρ2. This is strictly higher than the rate of the best one round protocol which is 1 - 2ρ, hence showing that interaction improves rate. We also prove that even with interaction, reliable communication is possible only if ρ \textbackslashtextless; 1/2. An interesting aspect of this work is that our bounds will also hold in network setting when two nodes are connected by n paths, a ρ of which is corrupted by the adversary. We discuss our results, give their relations to the other works, and propose directions for future work.

We present a novel multimodal fusion model for affective content analysis, combining visual, audio and deep visual-sentiment descriptors from the media content with automated facial action measurements from naturalistic responses to the media. We collected a dataset of 48,867 facial responses to 384 media clips and extracted a rich feature set from the facial responses and media content. The stimulus videos were validated to be informative, inspiring, persuasive, sentimental or amusing. By combining the features, we were able to obtain a classification accuracy of 63% (weighted F1-score: 0.62) for a five-class task. This was a significant improvement over using the media content features alone. By analyzing the feature sets independently, we found that states of informed and persuaded were difficult to differentiate from facial responses alone due to the presence of similar sets of action units in each state (AU 2 occurring frequently in both cases). Facial actions were beneficial in differentiating between amused and informed states whereas media content features alone performed less well due to similarities in the visual and audio make up of the content. We highlight examples of content and reactions from each class. This is the first affective content analysis based on reactions of 10,000s of people.

The Trusted Platform Module (TPM) is an international standard for a security chip that can be used for the management of cryptographic keys and for remote attestation. The specification of the most recent TPM 2.0 interfaces for direct anonymous attestation unfortunately has a number of severe shortcomings. First of all, they do not allow for security proofs (indeed, the published proofs are incorrect). Second, they provide a Diffie-Hellman oracle w.r.t. the secret key of the TPM, weakening the security and preventing forward anonymity of attestations. Fixes to these problems have been proposed, but they create new issues: they enable a fraudulent TPM to encode information into an attestation signature, which could be used to break anonymity or to leak the secret key. Furthermore, all proposed ways to remove the Diffie-Hellman oracle either strongly limit the functionality of the TPM or would require significant changes to the TPM 2.0 interfaces. In this paper we provide a better specification of the TPM 2.0 interfaces that addresses these problems and requires only minimal changes to the current TPM 2.0 commands. We then show how to use the revised interfaces to build q-SDH-and LRSW-based anonymous attestation schemes, and prove their security. We finally discuss how to obtain other schemes addressing different use cases such as key-binding for U-Prove and e-cash.

Internet Protocol version 6 (IPv6) over Low power Wireless Personal Area Networks (6LoWPAN) is extensively used in wireless sensor networks (WSNs) due to its ability to transmit IPv6 packet with low bandwidth and limited resources. 6LoWPAN has several operations in each layer. Most existing security challenges are focused on the network layer, which is represented by its routing protocol for low-power and lossy network (RPL). RPL components include WSN nodes that have constrained resources. Therefore, the exposure of RPL to various attacks may lead to network damage. A sinkhole attack is a routing attack that could affect the network topology. This paper aims to investigate the existing detection mechanisms used in detecting sinkhole attack on RPL-based networks. This work categorizes and presents each mechanism according to certain aspects. Then, their advantages and drawbacks with regard to resource consumption and false positive rate are discussed and compared.

The Internet Protocol version 6 (IPv6) over Low Power Wireless Personal Area Networks (6LoWPAN), which is a promising technology to promote the development of the Internet of Things (IoT), has been proposed to connect millions of IP-based sensing devices over the open Internet. To support the mobility of these resource constrained sensing nodes, the Proxy Mobile IPv6 (PMIPv6) has been proposed as the standard. Although the standard has specified some issues of security and mobility in 6LoWPANs, the issues of supporting secure group handovers have not been addressed much by the current existing solutions. In this paper, to reduce the handover latency and signaling cost, an efficient and secure group mobility scheme is designed to support seamless handovers for a group of resource constrained 6LoWPAN devices. With the consideration of the devices holding limited energy capacities, only simple hash and symmetric encryption method is used. The security analysis and the performance evaluation results show that the proposed 6LoWPAN group handover scheme could not only enhance the security functionalities but also support fast authentication for handovers.

The blockchain technology has emerged as an attractive solution to address performance and security issues in distributed systems. Blockchain's public and distributed peer-to-peer ledger capability benefits cloud computing services which require functions such as, assured data provenance, auditing, management of digital assets, and distributed consensus. Blockchain's underlying consensus mechanism allows to build a tamper-proof environment, where transactions on any digital assets are verified by set of authentic participants or miners. With use of strong cryptographic methods, blocks of transactions are chained together to enable immutability on the records. However, achieving consensus demands computational power from the miners in exchange of handsome reward. Therefore, greedy miners always try to exploit the system by augmenting their mining power. In this paper, we first discuss blockchain's capability in providing assured data provenance in cloud and present vulnerabilities in blockchain cloud. We model the block withholding (BWH) attack in a blockchain cloud considering distinct pool reward mechanisms. BWH attack provides rogue miner ample resources in the blockchain cloud for disrupting honest miners' mining efforts, which was verified through simulations.

A significant milestone is reached when the field of software vulnerability research matures to a point warranting related security patterns represented by intelligent data. A substantial research material of empirical findings, distinctive taxonomy, theoretical models, and a set of novel or adapted detection methods justify a unifying research map. The growth interest in software vulnerability is evident from a large number of works done during the last several decades. This article briefly reviews research works in vulnerability enumeration, taxonomy, models and detection methods from the perspective of intelligent data processing and analysis. This article also draws the map which associated with specific characteristics and challenges of vulnerability research, such as vulnerability patterns representation and problem-solving strategies.

In this work, we propose a design flow for automatic generation of hardware sandboxes purposed for IP security in trusted system-on-chips (SoCs). Our tool CAPSL, the Component Authentication Process for Sandboxed Layouts, is capable of detecting trojan activation and nullifying possible damage to a system at run-time, avoiding complex pre-fabrication and pre-deployment testing for trojans. Our approach captures the behavioral properties of non-trusted IPs, typically from a third-party or components off the shelf (COTS), with the formalism of interface automata and the Property Specification Language's sequential extended regular expressions (SERE). Using the concept of hardware sandboxing, we translate the property specifications to checker automata and partition an untrusted sector of the system, with included virtualized resources and controllers, to isolate sandbox-system interactions upon deviation from the behavioral checkers. Our design flow is verified with benchmarks from Trust-Hub.org, which show 100% trojan detection with reduced checker overhead compared to other run-time verification techniques.

We draw a formal connection between using synthetic training data to optimize neural network parameters and approximate, Bayesian, model-based reasoning. In particular, training a neural network using synthetic data can be viewed as learning a proposal distribution generator for approximate inference in the synthetic-data generative model. We demonstrate this connection in a recognition task where we develop a novel Captcha-breaking architecture and train it using synthetic data, demonstrating both state-of-the-art performance and a way of computing task-specific posterior uncertainty. Using a neural network trained this way, we also demonstrate successful breaking of real-world Captchas currently used by Facebook and Wikipedia. Reasoning from these empirical results and drawing connections with Bayesian modeling, we discuss the robustness of synthetic data results and suggest important considerations for ensuring good neural network generalization when training with synthetic data.

In this paper a novel data hiding method has been proposed which is based on Non-Linear Feedback Shift Register and Tinkerbell 2D chaotic map. So far, the major work in Steganography using chaotic map has been confined to image steganography where significant restrictions are there to increase payload. In our work, 2D chaotic map and NLFSR are used to developed a video steganography mechanism where data will be embedded in the segregated frames. This will increase the data hiding limit exponentially. Also, embedding position of each frame will be different from others frames which will increase the overall security of the proposed mechanism. We have achieved this randomized data hiding points by using a chaotic map. Basically, Chaotic theory which is non-linear dynamics physics is using in this era in the field of Cryptography and Steganography and because of this theory, little bit changes in initial condition makes the output totally different. So, it is very hard to get embedding position of data without knowing the initial value of the chaotic map.

Usually, the air gap will appear inside the composite insulators and it will lead to serious accident. In order to detect these internal defects in composite insulators operated in the transmission lines, a new non-destructive technique has been proposed. In the study, the mathematical analysis model of the composite insulators inner defects, which is about heat diffusion, has been build. The model helps to analyze the propagation process of heat loss and judge the structure and defects under the surface. Compared with traditional detection methods and other non-destructive techniques, the technique mentioned above has many advantages. In the study, air defects of composite insulators have been made artificially. Firstly, the artificially fabricated samples are tested by flash thermography, and this method shows a good performance to figure out the structure or defects under the surface. Compared the effect of different excitation between flash and hair drier, the artificially samples have a better performance after heating by flash. So the flash excitation is better. After testing by different pollution on the surface, it can be concluded that different pollution don't have much influence on figuring out the structure or defect under the surface, only have some influence on heat diffusion. Then the defective composite insulators from work site are detected and the image of defect is clear. This new active thermography system can be detected quickly, efficiently and accurately, ignoring the influence of different pollution and other environmental restrictions. So it will have a broad prospect of figuring out the defeats and structure in composite insulators even other styles of insulators.

Crowd management in urban settings has mostly relied on either classical, non-automated mechanisms or spontaneous notifications/alerts through social networks. Such management techniques are heavily marred by lack of comprehensive control, especially in terms of averting risks in a manner that ensures crowd safety and enables prompt emergency response. In this paper, we propose a Markov Decision Process Scheme MDP to realize a smart infrastructure that is directly aimed at crowd management. A key emphasis of the scheme is a robust and reliable scalability that provides sufficient flexibility to manage a mixed crowd (i.e., pedestrian, cyclers, manned vehicles and unmanned vehicles). The infrastructure also spans various population settings (e.g., roads, buildings, game arenas, etc.). To realize a reliable and scalable crowd management scheme, the classical MDP is decomposed into Local MDPs with smaller action-state spaces. Preliminarily results show that the MDP decomposition can reduce the system global cost and facilitate fast convergence to local near-optimal solution for each L-MDP.

Cryptography is the fascinating science that deals with constructing and destructing the secret codes. The evolving digitization in this modern era possesses cryptography as one of its backbones to perform the transactions with confidentiality and security wherever the authentication is required. With the modern technology that has evolved, the use of codes has exploded, enriching cryptology and empowering citizens. One of the most important things that encryption provides anyone using any kind of computing device is `privacy'. There is no way to have true privacy with strong security, the method with which we are dealing with is to make the cipher text more robust to be by-passed. In current work, the well known and renowned Caesar cipher and Rail fence cipher techniques are combined with a cross language cipher technique and the detailed comparative analysis amongst them is carried out. The simulations have been carried out on Eclipse Juno version IDE for executions and Java, an open source language has been used to implement these said techniques.

Software-defined networks offer a promising framework for the implementation of cross-layer data-centric security policies in military systems. An important aspect of the design process for such advanced security solutions is the thorough experimental assessment and validation of proposed technical concepts prior to their deployment in operational military systems. In this paper, we describe an OpenFlow-based testbed, which was developed with a specific focus on validation of SDN security mechanisms - including both the mechanisms for protecting the software-defined network layer and the cross-layer enforcement of higher level policies, such as data-centric security policies. We also present initial experimentation results obtained using the testbed, which confirm its ability to validate simulation and analytic predictions. Our objective is to provide a sufficiently detailed description of the configuration used in our testbed so that it can be easily re-plicated and re-used by other security researchers in their experiments.

Computer security tools usually provide universal solutions without taking user characteristics (origin, income level, ...) into account. In this paper, we test the validity of using such universal security defenses, with a particular focus on culture. We apply the previously proposed Security Behavior Intentions Scale (SeBIS) to 3,500 participants from seven countries. We first translate the scale into seven languages while preserving its reliability and structure validity. We then build a regression model to study which factors affect participants' security behavior. We find that participants from different countries exhibit different behavior. For instance, participants from Asian countries, and especially Japan, tend to exhibit less secure behavior. Surprisingly to us, we also find that actual knowledge influences user behavior much less than user self-confidence in their computer security knowledge. Stated differently, what people think they know affects their security behavior more than what they do know.

The previous consideration of power grid focuses on the power system itself, however, the recent work is aiming at both power grid and communication network, this coupling networks are firstly called as interdependent networks. Prior study on modeling interdependent networks always extracts main features from real networks, the model of network A and network B are completely symmetrical, both degree distribution in intranetwork and support pattern in inter-network, but in reality this circumstance is hard to attain. In this paper, we deliberately set both networks with same topology in order to specialized research the support pattern between networks. In terms of initial failure from power grid or communication network, we find the remaining survival fraction is greatly disparate, and the failure initially from power grid is more harmful than failure initially from communication network, which all show the vulnerability of interdependency and meantime guide us to pay more attention to the protection measures for power grid.

The Air Force is shifting its cybersecurity paradigm from an information technology (IT)-centric toward a mission oriented approach. Instead of focusing on how to defend its IT infrastructure, it seeks to provide mission assurance by defending mission relevant cyber terrain enabling mission execution in a contested environment. In order to actively defend a mission in cyberspace, efforts must be taken to understand and document that mission's dependence on cyberspace and cyber assets. This is known as cyber terrain mission mapping. This paper seeks to define mission mapping and overview methodologies. We also analyze current tools seeking to provide cyber situational awareness through mission mapping or cyber dependency impact analysis and identify existing shortfalls.

With the advent of smart devices and lowering prices of sensing devices, adoption of Internet of Things (IoT) is gaining momentum. These IoT devices come with greater threat of being attacked or compromised that could lead to Denial of Service (DoS) and Distributed Denial of Service (DDoS). The high volume of IoT devices with high level of heterogeneity, magnify the possibility of security threats. So far, there is no protocol to guarantee the security of IoT devices. But to enable resilience, continuous monitoring is required along with adaptive decision making. These challenges can be addressed with the help of Software Defined Networking (SDN) which can effectively handle the security threats to the IoT devices in dynamic and adaptive manner without any burden on the IoT devices. In this paper, we propose an SDN-based secure IoT framework called SoftThings to detect abnormal behaviors and attacks as early as possible and mitigate as appropriate. Machine Learning is used at the SDN controller to monitor and learn the behavior of IoT devices over time. We have conducted experiments on Mininet emulator. Initial results show that this framework is capable to detect attacks on IoT with around 98% precision.

The majority of business activity of our integrated and connected world takes place in networks based on cloud computing infrastructure that cross national, geographic and jurisdictional boundaries. Such an efficient entity interconnection is made possible through an emerging networking paradigm, Software Defined Networking (SDN) that intends to vastly simplify policy enforcement and network reconfiguration in a dynamic manner. However, despite the obvious advantages this novel networking paradigm introduces, its increased attack surface compared to traditional networking deployments proved to be a thorny issue that creates skepticism when safety-critical applications are considered. Especially when SDN is used to support Internet-of-Things (IoT)-related networking elements, additional security concerns rise, due to the elevated vulnerability of such deployments to specific types of attacks and the necessity of inter-cloud communication any IoT application would require. The overall number of connected nodes makes the efficient monitoring of all entities a real challenge, that must be tackled to prevent system degradation and service outage. This position paper provides an overview of common security issues of SDN when linked to IoT clouds, describes the design principals of the recently introduced Blockchain paradigm and advocates the reasons that render Blockchain as a significant security factor for solutions where SDN and IoT are involved.

The majority of business activity of our integrated and connected world takes place in networks based on cloud computing infrastructure that cross national, geographic and jurisdictional boundaries. Such an efficient entity interconnection is made possible through an emerging networking paradigm, Software Defined Networking (SDN) that intends to vastly simplify policy enforcement and network reconfiguration in a dynamic manner. However, despite the obvious advantages this novel networking paradigm introduces, its increased attack surface compared to traditional networking deployments proved to be a thorny issue that creates skepticism when safety-critical applications are considered. Especially when SDN is used to support Internet-of-Things (IoT)-related networking elements, additional security concerns rise, due to the elevated vulnerability of such deployments to specific types of attacks and the necessity of inter-cloud communication any IoT application would require. The overall number of connected nodes makes the efficient monitoring of all entities a real challenge, that must be tackled to prevent system degradation and service outage. This position paper provides an overview of common security issues of SDN when linked to IoT clouds, describes the design principals of the recently introduced Blockchain paradigm and advocates the reasons that render Blockchain as a significant security factor for solutions where SDN and IoT are involved.

The most of the organizations tend to accumulate the data related to security, which goes up-to terabytes in every month. They collect this data to meet the security requirements. The data is mostly in the shape of logs like Dns logs, Pcap files, and Firewall data etc. The data can be related to any communication network like cloud, telecom, or smart grid network. Generally, these logs are stored in databases or warehouses which becomes ultimately gigantic in size. Such a huge size of data upsurge the importance of security analytics in big data. In surveys, the security experts grumble about the existing tools and recommend for special tools and methods for big data security analysis. In this paper, we are using a big data analysis tool, which is known as apache spark. Although this tool is used for general purpose but we have used this for security analysis. It offers a very good library for machine learning algorithms including the clustering which is the main algorithm used in our work. In this work, we have developed a novel model, which combines rule based and clustering analysis for security analysis of big dataset. The dataset we are using in our experiment is the Kddcup99 which is a widely used dataset for intrusion detection. It is of MBs in size but can be used as a test case for big data security analysis.

Traditional information Security Risk Assessment algorithms are mainly used for evaluating small scale of information system, not suitable for massive information systems in Energy Internet. To solve the problem, this paper proposes an Information Security Risk Algorithm based on Dynamic Risk Propagation (ISRADRP). ISRADRP firstly divides information systems in the Energy Internet into different partitions according to their logical network location. Then, ISRADRP computes each partition's risk value without considering threat propagation effect via RM algorithm. Furthermore, ISRADRP calculates inside and outside propagation risk value for each partition according to Dependency Structure Matrix. Finally, the security bottleneck of systems will be identified and the overall risk value of information system will be obtained.

Traditional information Security Risk Assessment algorithms are mainly used for evaluating small scale of information system, not suitable for massive information systems in Energy Internet. To solve the problem, this paper proposes an Information Security Risk Algorithm based on Dynamic Risk Propagation (ISRADRP). ISRADRP firstly divides information systems in the Energy Internet into different partitions according to their logical network location. Then, ISRADRP computes each partition's risk value without considering threat propagation effect via RM algorithm. Furthermore, ISRADRP calculates inside and outside propagation risk value for each partition according to Dependency Structure Matrix. Finally, the security bottleneck of systems will be identified and the overall risk value of information system will be obtained.