Biblio

This paper investigates the physical layer security in a multibeam satellite communication system, where each legitimate user is surrounded by one eavesdropper. First of all, an optimization problem is formulated to maximize the sum of achievable secrecy rate, while satisfying the on-board satellite transmit power constraint. Then, two transmit beamforming(BF) schemes, namely, the zero-forcing (ZF) and the signal-to-leakage-and-noise ratio (SLNR) BF algorithms are proposed to obtain the BF weight vectors as well as power allocation coefficients. Finally, simulation results are provided to verify the validity of the two proposed methods and demonstrate that the SLNR BF algorithm outperforms the ZF BF algorithm.

In this paper, a simulation model of digital intermediate frequency (IF) GPS signal is presented. This design is developed based on mathematical model representing the digitized IF GPS signal. In details, C/A code, navigation data and P code, and the noise models are configured some initial settings simultaneously. Simulation results show that the simulated signals share the same properties with real signals (e.g. C/A code correlation properties, and the spread spectrum). The simulated GPS IF signal data can work as input for various signal processing algorithm of GPS receivers, such as acquisition, tracking, carrier-to-noise ratio (C/No) estimation, and GPS spoofing signal generation. Particularly, the simulated GPS signal can conduct scenarios by adjust SNR values of the noise generator during simulation (e.g. signal outages, sudden changes of GPS signal power), which can be used as setup experiments of spoofing/jamming interference to UAVs for drone security applications.

The conventional physical-layer (PHY) security approaches, e.g., transmit beamforming and artificial noise (AN)-based design, may fail when the channels of legitimate user (LU) and eavesdropper (Eve) are close correlated. Due to the highly directional transmission feature of millimeter-wave (mmWave), this may occur in mmWave transmissions as the transmitter, Eve and LU are aligned in the same direction exactly. To handle the PHY security problem with directionally-aligned LU and Eve, we propose a novel frequency diverse array (FDA) beamforming approach to differentiating the LU and Eve. By intentionally introducing some frequency offsets across the antennas, the FDA beamforming generates an angle-range dependent beampattern. As a consequence, it can degrade the Eve's reception and thus achieve PHY security. In this paper, we maximize the secrecy rate by jointly optimizing the frequency offsets and the beamformer. This secrecy rate maximization (SRM) problem is hard to solve due to the tightly coupled variables. Nevertheless, we show that it can be reformulated into a form depending only on the frequency offsets. Building upon this reformulation, we identify some cases where the SRM problem can be optimally solved in closed form. Numerical results demonstrate the efficacy of FDA beamforming in achieving PHY security, even for aligned LU and Eve.

The importance of the task of countering the means of unauthorized access is to preserve the integrity of restricted access information circulating in computer networks determines the relevance of investigating perspective methods of cryptographic transformations, which are characterized by high speed and reliability of encryption. The methods of information security in the telecommunication system were researched based on integration of encryption processes and noise-immune coding. The method for data encryption based on generic polynomials of cyclic codes, gamut of the dynamic chaos sequence, and timer coding was proposed. The expediency of using timer coding for increasing the cryptographic strength of the encryption system and compensating for the redundancy of the verification elements was substantiated. The method for cryptographic transformation of data based on the gamma sequence was developed, which is formed by combining numbers from different sources of dynamical chaos generators. The efficiency criterion was introduced for the integrated information transformation method.

In this paper, an improved cooperative jamming (CJ) strategy is developed for physical layer (PHY) security in a multi-hop wireless communication system which employs beamforming in the last hop. Users are assigned to independent groups based on the merger-and-split rule in a coalition game. The secrecy capacity for a valid coalition is a non-convex optimization problem which cannot easily be solved. Therefore, restrictions are added to transform this into a convex problem, and this is solved to obtain a suboptimal closed-form solution for the secrecy capacity. Simulation results are presented which show that the proposed strategy outperforms other methods such as non-cooperation, relay cooperation, and previous CJ approaches in terms of the secrecy capacity. Further, it is shown that the proposed multi-hop solution is suitable for long distance communication systems.

This paper describes and verifies a method of implementing bit error rate (BER) calculation for FPGA-based physical layer security techniques for Software Defined Radio (SDR). Specifically, we describe an independent source signal processing architecture for an efficient calculation of BER for wireless communication modules across the transmitter and receiver nodes. The source components at the transmitter and the receiver both generate identical random bits independently from each other, allowing for the received data to be compared to the original bit stream to calculate BER completely on hardware. The described method is implemented on a Xilinx Virtex-6 ML605 FPGA and reduces processing time by more than four orders of magnitude less than hardware simulation techniques in regression testing and validation over billions of bits, shortening design turn around times and accelerating Physical layer based security development for wireless communication research. The described independent source approach utilizes a minimal amount of board resources, allowing it to be integrated seamlessly into SDR hardware designs. Experimental validation of the independent source based BER calculation is performed for an Orthogonal Frequency Division Multiplexing signal, and a comparison between different stages of hardware design for the execution time required for BER testing of a large number of bits is provided.

Delay and security are both highly concerned in the Internet of Things (IoT). In this paper, we set up a secure analytical framework for IoT networks to characterize the network delay performance and secrecy performance. Firstly, stochastic geometry and queueing theory are adopted to model the location of IoT devices and the temporal arrival of packets. Based on this model, a low-complexity secure on-off scheme is proposed to improve the network performance. Then, the delay performance and secrecy performance are evaluated in terms of packet delay and packet secrecy outage probability. It is demonstrated that the intensity of IoT devices arouse a tradeoff between the delay and security and the secure on-off scheme can improve the network delay performance and secrecy performance. Moreover, secrecy transmission rate is adopted to reflect the delay-security tradeoff. The analytical and simulation results show the effects of intensity of IoT devices and secure on-off scheme on the network delay performance and secrecy performance.

Honeynet is deployed to trap attackers and learn their behavior patterns and motivations. Conventional honeynet is implemented by dedicated hardware and software. It suffers from inflexibility, high CAPEX and OPEX. There have been several virtualized honeynet architectures to solve those problems. But they lack a standard operating environment and common architecture for dynamic scheduling and adaptive resource allocation. Software Defined Security (SDS) framework has a centralized control mechanism and intelligent decision making ability for different security functions. In this paper, we present a new intelligent honeynet architecture based on SDS framework. It implements security functions over Network Function Virtualization Infrastructure (NFVI). Under uniform and intelligent control, security functional modules can be dynamically deployed and collaborated to complete different tasks. It migrates resources according to the workloads of each honeypot and power off unused modules. Simulation results show that intelligent honeynet has a better performance in conserving resources and reducing energy consumption. The new architecture can fit the needs of future honeynet development and deployment.

In this paper, we quantify the effectiveness of third-party tracker blockers on a large scale. First, we analyze the architecture of various state-of-the-art blocking solutions and discuss the advantages and disadvantages of each method. Second, we perform a two-part measurement study on the effectiveness of popular tracker-blocking tools. Our analysis quantifies the protection offered against trackers present on more than 100,000 popular websites and 10,000 popular Android applications. We provide novel insights into the ongoing arms race between trackers and developers of blocking tools as well as which tools achieve the best results under what circumstances. Among others, we discover that rule-based browser extensions outperform learning-based ones, trackers with smaller footprints are more successful at avoiding being blocked, and CDNs pose a major threat towards the future of tracker-blocking tools. Overall, the contributions of this paper advance the field of web privacy by providing not only the largest study to date on the effectiveness of tracker-blocking tools, but also by highlighting the most pressing challenges and privacy issues of third-party tracking.
 

Cross-Site Request Forgery (CSRF) attacks are one of the critical threats to web applications. In this paper, we focus on CSRF attacks targeting web sites' authentication and identity management functionalities. We will refer to them collectively as Authentication CSRF (Auth-CSRF in short). We started by collecting several Auth-CSRF attacks reported in the literature, then analyzed their underlying strategies and identified 7 security testing strategies that can help a manual tester uncover vulnerabilities enabling Auth-CSRF. In order to check the effectiveness of our testing strategies and to estimate the incidence of Auth-CSRF, we conducted an experimental analysis considering 300 web sites belonging to 3 different rank ranges of the Alexa global top 1500. The results of our experiments are alarming: out of the 300 web sites we considered, 133 qualified for conducting our experiments and 90 of these suffered from at least one vulnerability enabling Auth-CSRF (i.e. 68%). We further generalized our testing strategies, enhanced them with the knowledge we acquired during our experiments and implemented them as an extension (namely CSRF-checker) to the open-source penetration testing tool OWASP ZAP. With the help of CSRFchecker, we tested 132 additional web sites (again from the Alexa global top 1500) and identified 95 vulnerable ones (i.e. 72%). Our findings include serious vulnerabilities among the web sites of Microsoft, Google, eBay etc. Finally, we responsibly disclosed our findings to the affected vendors.

This paper discusses possible approaches to address the loss of user privacy when browsing the web and being tracked by websites which compute a browser fingerprint identifying the user computer. The key problem is that the current fingerprinting countermeasures are insufficient to prevent fingerprinting tracking and also frequently produce side-effects on the web browser. The advantages and disadvantages of possible countermeasures are discussed in the context of improving resistance against browser fingerprinting. Finally, using a new browser extension is proposed as the best way to inhibit fingerprinting as it could probably inhibit some of the fingerprinting techniques used and also diminish the side-effects on the user browser experience, compared with existing techniques.

The best practice to prevent Cross Site Scripting (XSS) attacks is to apply encoders to sanitize untrusted data. To balance security and functionality, encoders should be applied to match the web page context, such as HTML body, JavaScript, and style sheets. A common programming error is the use of a wrong encoder to sanitize untrusted data, leaving the application vulnerable. We present a security unit testing approach to detect XSS vulnerabilities caused by improper encoding of untrusted data. Unit tests for the XSS vulnerability are automatically constructed out of each web page and then evaluated by a unit test execution framework. A grammar-based attack generator is used to automatically generate test inputs. We evaluate our approach on a large open source medical records application, demonstrating that we can detect many 0-day XSS vulnerabilities with very low false positives, and that the grammar-based attack generator has better test coverage than industry best practices.

The malicious websites used by drive-by download attacks change their behavior for web client environments. To analyze the behavior of malicious websites, the single-environment analysis cannot obtain sufficient information. Hence, it is difficult to analyze the whole aspect of malicious websites. Also, the code obfuscation and cloaking are used in malicious websites to avoid to be analyzed their behavior. In this paper, we propose an analyzing method that combines decoding of the obfuscation code with dynamic analysis using multi-environment analysis system in order to analyze the behavior of the malicious websites in detail. Furthermore, we present two approaches to improve the multi-environment analysis. The first one is automation of traffic log analysis to reduce the cost of analyzing huge traffic logs between the environments and malicious websites. The second one is multimodal analysis for finding the URL of malicious websites.

The TLS protocol is the primary technology used for securing web transactions. It is based on X.509 certificates that are used for binding the identity of web servers' owners to their public keys. Web browsers perform the validation of X.509 certificates on behalf of Web users. Our previous research in 2009 showed that the validation process of Web browsers is inconsistent and flawed. We showed how this situation might have a negative impact on Web users. From 2009 until now, many new X.509 related standards have been created or updated. In this paper, we performed an increased set of experiments over our 2009 study in order to highlight the improvements and/or regressions in Web browsers' behaviours.

We require a very good technical knowledge to create automated tests to exploit the browser vulnerabilities. It is usually a combination of technical abilities and set of specific tools. Security concerns is of prime importance when it comes to web browsers. Attacks during surfing, executing any downloaded file and while transmission are very frequent these days and hence all browsers need to be hardened to ensure security. Sandbox is one of the feature where we can prevent malicious applications to run directly on hardware. It is an environment where new or non-trusted applications are executed. Many leading web browsers are trying their level best to implement sandbox. In this paper, we have mentioned the basic necessity of sandbox, current implementations in different web browsers and also present a self-proposed approach.

The continuous discovery of exploitable vulnerabilitiesin popular applications (e.g., web browsers and documentviewers), along with their heightening protections against control flow hijacking, has opened the door to an oftenneglected attack strategy-namely, data-only attacks. In thispaper, we demonstrate the practicality of the threat posedby data-only attacks that harness the power of memorydisclosure vulnerabilities. To do so, we introduce memorycartography, a technique that simplifies the construction ofdata-only attacks in a reliable manner. Specifically, we showhow an adversary can use a provided memory mapping primitive to navigate through process memory at runtime, andsafely reach security-critical data that can then be modifiedat will. We demonstrate this capability by using our cross-platform memory cartography framework implementation toconstruct data-only exploits against Internet Explorer and Chrome. The outcome of these exploits ranges from simple HTTP cookie leakage, to the alteration of the same originpolicy for targeted domains, which enables the cross-originexecution of arbitrary script code. The ease with which we can undermine the security ofmodern browsers stems from the fact that although isolationpolicies (such as the same origin policy) are enforced atthe script level, these policies are not well reflected in theunderlying sandbox process models used for compartmentalization. This gap exists because the complex demands oftoday's web functionality make the goal of enforcing thesame origin policy through process isolation a difficult oneto realize in practice, especially when backward compatibility is a priority (e.g., for support of cross-origin IFRAMEs). While fixing the underlying problems likely requires a majorrefactoring of the security architecture of modern browsers(in the long term), we explore several defenses, includingglobal variable randomization, that can limit the power ofthe attacks presented herein.

The de facto approach to Web security today is HTTPS. While HTTPS ensures complete security for clients and servers, it also interferes with transparent content-caching at middleboxes. To address this problem and support both security and caching, we propose a new approach to Web security and privacy called GroupSec. The key innovation of GroupSec is that it replaces the traditional session-based security model with a new model based on content group membership. We introduce the GroupSec security model and show how HTTP can be easily adapted to support GroupSec without requiring changes to browsers, servers, or middleboxes. Finally, we present results of a threat analysis and performance experiments which show that GroupSec achieves notable performance benefits at the client and server while remaining as secure as HTTPS.

This article presents introduction to HTTP Security Headers - new security topic in communication over Internet. It is emphasized that HTTPS protocol and SSL/TLS certificates alone do not offer sufficient level of security for communication among people and devices. In the world of web applications and Internet of Things (IoT), it is vital to bring communication security at higher level, what could be realised via few simple steps. HTTP Response Headers used for different purposes in the past are now the effective way how to propagate security policies from servers to clients (from web servers to web browsers). First improvement is enforcing HTTPS protocol for communication everywhere it is possible and promote this protocol as first and only option for secure connection over the Internet. It is emphasized that HTTP protocol for communication is not suitable anymore.

Cloud computing enables the outsourcing of big data analytics, where a third-party server is responsible for data management and processing. In this paper, we consider the outsourcing model in which a third-party server provides record matching as a service. In particular, given a target record, the service provider returns all records from the outsourced dataset that match the target according to specific distance metrics. Identifying matching records in databases plays an important role in information integration and entity resolution. A major security concern of this outsourcing paradigm is whether the service provider returns the correct record matching results. To solve the problem, we design EARRING, an Efficient Authentication of outsouRced Record matchING framework. EARRING requires the service provider to construct the verification object (VO) of the record matching results. From the VO, the client is able to catch any incorrect result with cheap computational cost. Experiment results on real-world datasets demonstrate the efficiency of EARRING.

In order to improve the spectrum utilization rate of Device-to-Device (D2D) communication, we study the hybrid resource allocation problem, which allows both the resource reuse and resource dedicated mode to work simultaneously. Meanwhile, multiple D2D devices are permitted to share uplink cellular resources with some designated cellular user equipment (CUE). Combined with the transmission requirement of different users, the optimized resource allocation problem is built which is a NP-hard problem. A heuristic greedy throughput maximization (HGTM) based on clustering algorithm is then proposed to solve the above problem. Numerical results demonstrate that the proposed HGTM outperforms existing algorithms in the sum throughput, CUEs SINR performance and the number of accessed D2D deceives.

Clone-and-own approach is a natural way of source code reuse for software developers. To assess how known bugs and security vulnerabilities of a cloned component affect an application, developers and security analysts need to identify an original version of the component and understand how the cloned component is different from the original one. Although developers may record the original version information in a version control system and/or directory names, such information is often either unavailable or incomplete. In this research, we propose a code search method that takes as input a set of source files and extracts all the components including similar files from a software ecosystem (i.e., a collection of existing versions of software packages). Our method employs an efficient file similarity computation using b-bit minwise hashing technique. We use an aggregated file similarity for ranking components. To evaluate the effectiveness of this tool, we analyzed 75 cloned components in Firefox and Android source code. The tool took about two hours to report the original components from 10 million files in Debian GNU/Linux packages. Recall of the top-five components in the extracted lists is 0.907, while recall of a baseline using SHA-1 file hash is 0.773, according to the ground truth recorded in the source code repositories.

New generations of industrial control systems offer higher performance, they are distributed, and it is very likely that they are internet connected in one way or another. These trends raise new challenges in the contexts of reliability and security. We propose a novel approach that tackles the complexity of industrial control systems at design time and run time. At design time our target is to ease the configuration and verification of controller configurations through model-driven engineering techniques together with the contract-based design paradigm. At run time the information from design time is reused in order to support a modular and distributed self-adaptive software system that aims to increase reliability and security. The industrial setting of the presented approach are control devices for hydropower plant units.

Summary form only given. Strong light-matter coupling has been recently successfully explored in the GHz and THz [1] range with on-chip platforms. New and intriguing quantum optical phenomena have been predicted in the ultrastrong coupling regime [2], when the coupling strength Ω becomes comparable to the unperturbed frequency of the system ω. We recently proposed a new experimental platform where we couple the inter-Landau level transition of an high-mobility 2DEG to the highly subwavelength photonic mode of an LC meta-atom [3] showing very large Ω/ωc = 0.87. Our system benefits from the collective enhancement of the light-matter coupling which comes from the scaling of the coupling Ω ∝ √n, were n is the number of optically active electrons. In our previous experiments [3] and in literature [4] this number varies from 104-103 electrons per meta-atom. We now engineer a new cavity, resonant at 290 GHz, with an extremely reduced effective mode surface Seff = 4 × 10-14 m2 (FE simulations, CST), yielding large field enhancements above 1500 and allowing to enter the few (\textbackslashtextless;100) electron regime. It consist of a complementary metasurface with two very sharp metallic tips separated by a 60 nm gap (Fig.1(a, b)) on top of a single triangular quantum well. THz-TDS transmission experiments as a function of the applied magnetic field reveal strong anticrossing of the cavity mode with linear cyclotron dispersion. Measurements for arrays of only 12 cavities are reported in Fig.1(c). On the top horizontal axis we report the number of electrons occupying the topmost Landau level as a function of the magnetic field. At the anticrossing field of B=0.73 T we measure approximately 60 electrons ultra strongly coupled (Ω/ω- \textbackslashtextbar\textbackslashtextbar

We introduce Active Dependency Mapping (ADM), a method for establishing dependency relations among a set of interdependent services. The approach is to artificially degrade network performance to infer which assets on the network support a particular process. Artificial degradation of the network environment could be transparent to users; run continuously it could identify dependencies that are rare or occur only at certain timescales. A useful byproduct of this dependency analysis is a quantitative assessment of the resilience and robustness of the system. This technique is intriguing for hardening both enterprise networks and cyber physical systems. We present a proof-of-concept experiment executed on a real-world set of interrelated software services. We assess the efficacy of the approach, discuss current limitations, and suggest options for future development of ADM.

The Internet of Things (IoT) is the latest evolution of the Internet, encompassing an enormous number of connected physical "things." The access-control oriented (ACO) architecture was recently proposed for cloud-enabled IoT, with virtual objects (VOs) and cloud services in the middle layers. A central aspect of ACO is to control communication among VOs. This paper develops operational and administrative access control models for this purpose, assuming topic-based publishsubscribe interaction among VOs. Operational models are developed using (i) access control lists for topics and capabilities for virtual objects and (ii) attribute-based access control, and it is argued that role-based access control is not suitable for this purpose. Administrative models for these two operational models are developed using (i) access control lists, (ii) role-based access control, and (iii) attribute-based access control. A use case illustrates the details of these access control models for VO communication, and their differences. An assessment of these models with respect to security and privacy preserving objectives of IoT is also provided.