Biblio

Future networks require fast information response time, scalable content distribution, security and mobility. In order to enable future Internet many key enabling technologies have been proposed such as Edge computing (EC) and Named Data Networking (NDN). In EC substantial compute and storage resources are placed at the edge of the network, in close proximity to end users. Similarly, NDN provides an alternative to traditional host centric IP architecture which seems a perfect candidate for distributed computation. Although NDN with EC seems a promising approach for enabling future Internet, it can cause various challenges such as expiry time of the Pending Interest Table (PIT) and non-trivial computation of the edge node. In this paper we discuss the expiry time and non-trivial computation in NDN based EC. We argue that if NDN is integrated in EC, then the PIT expiry time will be affected in relation with the processing time on the edge node. Our analysis shows that integrating NDN in EC without considering PIT expiry time may result in the degradation of network performance in terms of Interest Satisfaction Rate.

It seems impossible to certify that a remote hosting service does not leak its users' data - or does quantum mechanics make it possible? We investigate if a server hosting data can information-theoretically prove its definite deletion using a "BB84-like" protocol. To do so, we first rigorously introduce an alternative to privacy by encryption: privacy delegation. We then apply this novel concept to provable deletion and remote data storage. For both tasks, we present a protocol, sketch its partial security, and display its vulnerability to eavesdropping attacks targeting only a few bits.

As we all know, computer network security evaluation is an important link in the field of network security. Traditional computer network security evaluation methods use BP neural network combined with network security standards to train and simulate. However, because BP neural network is easy to fall into local minimum point in the training process, the evalu-ation results are often inaccurate. In this paper, the LM (Levenberg-Marquard) algorithm is used to optimize the BP neural network. The LM-BP algorithm is constructed and applied to the computer network security evaluation. The results show that compared with the traditional evaluation algorithm, the optimized neural network has the advantages of fast running speed and accurate evaluation results.

The potential risk of agricultural product supply chain is huge because of the complex attributes specific to it. Actually the safety incidents of edible agricultural product emerge frequently in recent years, which expose the fragility of the agricultural product supply chain. In this paper the possible risk factors in agricultural product supply chain is analyzed in detail, the agricultural product supply chain risk evaluation index system and evaluation model are established, and an empirical analysis is made using BP neural network method. The results show that the risk ranking of the simulated evaluation is consistent with the target value ranking, and the risk assessment model has a good generalization and extension ability, and the model has a good reference value for preventing agricultural product supply chain risk.

Deep learning has been successfully applied to the ordinary image super-resolution (SR). However, since the synthetic aperture radar (SAR) images are often disturbed by multiplicative noise known as speckle and more blurry than ordinary images, there are few deep learning methods for the SAR image SR. In this paper, a deep generative adversarial network (DGAN) is proposed to reconstruct the pseudo high-resolution (HR) SAR images. First, a generator network is constructed to remove the noise of low-resolution SAR image and generate HR SAR image. Second, a discriminator network is used to differentiate between the pseudo super-resolution images and the realistic HR images. The adversarial objective function is introduced to make the pseudo HR SAR images closer to real SAR images. The experimental results show that our method can maintain the SAR image content with high-level noise suppression. The performance evaluation based on peak signal-to-noise-ratio and structural similarity index shows the superiority of the proposed method to the conventional CNN baselines.

Distributed Denial of Service attacks (DDoS) are used by attackers for their effectiveness. This type of attack is one of the most devastating attacks in the Internet. Every year, the intensity of DDoS attacks increases and attackers use sophisticated multi-target DDoS attacks. In this paper, a modular system that allows to increase the filtering capacity linearly and allows to protect against the combination of DDoS attacks is designed and implemented. The main motivation for development of the modular filtering system was to find a cheap solution for filtering DDoS attacks with possibility to increase filtering capacity. The proposed system is based on open-source detection and filtration tools.

{1 We present a construction for exact-repair regenerating codes with an information-theoretic secrecy guarantee against an eavesdropper with access to the content of (up to) ℓ nodes. The proposed construction works for the entire range of per-node storage and repair bandwidth for any distributed storage system with parameters (n

Intelligent connected vehicle system tightly integrates computing, communication, and control strategy. It can increase the traffic throughput, minimize the risk of accidents and reduce the energy consumption. However, because of the openness of the vehicular ad hoc network, the system is vulnerable to cyber-attacks and may result in disastrous consequences. Hence, it is interesting in design of the connected vehicular systems to be resilient to the sensor attacks. The paper focuses on the estimation and control of the intelligent connected vehicle systems when the sensors or the wireless channels of the system are attacked by attackers. We give the upper bound of the corrupted sensors that can be corrected and design the state estimator to reconstruct the initial state by designing a closed-loop controller. Finally, we verify the algorithm for the connected vehicle system by some classical simulations.

In this paper we consider connected and autonomous vehicles (CAV) in a traffic network as moving waves defined by their frequency and phase. This outlook allows us to develop a multi-layer decentralized control strategy that achieves the following desirable behaviors: (1) safe spacing between vehicles traveling down the same road, (2) coordinated safe crossing at intersections of conflicting flows, (3) smooth velocity profiles when traversing adjacent intersections. The approach consist of using the Kuramoto equation to synchronize the phase and frequency of agents in the network. The output of this layer serves as the reference trajectory for a back-stepping controller that interfaces the first-order dynamics of the phase-domain layer and the second order dynamics of the vehicle. We show the performance of the strategy for a single intersection and a small urban grid network. The literature has focused on solving the intersection coordination problem in both a centralized and decentralized manner. Some authors have even used the Kuramoto equation to achieve synchronization of traffic lights. Our proposed strategy falls in the rubric of a decentralized approach, but unlike previous work, it defines the vehicles as the oscillating agents, and leverages their inter-connectivity to achieve network-wide synchronization. In this way, it combines the benefits of coordinating the crossing of vehicles at individual intersections and synchronizing flow from adjacent junctions.

To discuss secure key generation from imperfect random numbers, we address the secure key generation length. There are several studies for its asymptotic expansion up to the order √n or log n. However, these expansions have errors of the order o(√n) or o(log n), which does not go to zero asymptotically. To resolve this problem, we derive the asymptotic expansion up to the constant order for upper and lower bounds of these optimal values. While the expansions of upper and lower bonds do not match, they clarify the ranges of these optimal values, whose errors go to zero asymptotically.

The main information and communication systems (ICS) effectiveness parameters are: reliability, resiliency, network bandwidth, service quality, profitability and cost, malware protection, information security, etc. Most modern ICS refers to multiuser systems, which implement the most promising method of distributing subscribers (users), namely, the code distribution, at which, subscribers are provided with appropriate forms of discrete sequences (signatures). Since in multiuser systems, channels code division is based on signal difference, then the ICS construction and systems performance indicators are determined by the chosen signals properties. Distributed spectrum technology is the promising direction of information security for telecommunication systems. Currently used data generation and processing methods, as well as the broadband signal classes used as a physical data carrier, are not enough for the necessary level of information security (information secrecy, imitation resistance) as well as noise immunity (impedance reception, structural secrecy) of the necessary (for some ICS applications). In this case, discrete sequences (DS) that are based on nonlinear construction rules and have improved correlation, ensemble and structural properties should be used as DS that extend the spectrum (manipulate carrier frequency). In particular, with the use of such signals as the physical carrier of information or synchronization signals, the time expenditures on the disclosure of the signal structure used are increasing and the setting of "optima", in terms of the counteracting station, obstacles becomes problematic. Complex signals obtained on such sequences basis have structural properties, similar to random (pseudorandom) sequences, as well as necessary correlation and ensemble properties. For designing signals for applications applied for measuring delay time, signal detecting, synchronizing stations and etc, side-lobe levels of autocorrelation function (ACF) minimization is essential. In this paper, the problem of optimizing the synthesis of nonlinear discrete sequences, which have improved ensemble, structural and autocorrelation properties, is formulated and solved. The use of nonlinear discrete signals, which are formed on the basis of such sequences, will provide necessary values for impedance protection, structural and information secrecy of ICS operation. Increased requirements for ICS information security, formation and performance data in terms of internal and external threats (influences), determine objectively existing technical and scientific controversy to be solved is goal of this work.The paper presents the results of solving the actual problem of performance indicators improvements for information and communication systems, in particular secrecy, information security and noise immunity with interfering influences, based on the nonlinear discrete cryptographic signals (CS) new classes synthesis with the necessary properties.

A systematic study of technologies and concepts used for the design and construction of distributed fail-safe web systems has been conducted. The general principles of the design of distributed web-systems and information technologies that are used in the design of web-systems are considered. As a result of scientific research, it became clear that data backup is a determining attribute of most web systems serving. Thus, the main role in building modern web systems is to scaling them. Scaling in distributed systems is used when performing a particular operation requires a large amount of computing resources. There are two scaling options, namely vertical and horizontal. Vertical scaling is to increase the performance of existing components in order to increase overall productivity. However, for the construction of distributed systems, use horizontal scaling. Horizontal scaling is that the system is split into small components and placed on various physical computers. This approach allows the addition of new nodes to increase the productivity of the web system as a whole.

With widely applied in various fields, deep learning (DL) is becoming the key driving force in industry. Although it has achieved great success in artificial intelligence tasks, similar to traditional software, it has defects that, once it failed, unpredictable accidents and losses would be caused. In this paper, we propose a test cases generation technique based on an adversarial samples generation algorithm for image classification deep neural networks (DNNs), which can generate a large number of good test cases for the testing of DNNs, especially in case that test cases are insufficient. We briefly introduce our method, and implement the framework. We conduct experiments on some classic DNN models and datasets. We further evaluate the test set by using a coverage metric based on states of the DNN.

As cyber attacks to Industrial Internet of Things (IIoT) remain a major challenge, blockchain has emerged as a promising technology for IIoT security due to its decentralization and immutability characteristics. Existing blockchain designs, however, introduce high computational complexity and latency challenges which are unsuitable for IIoT. This paper proposes Xyreum, a new high-performance and scalable blockchain for enhanced IIoT security and privacy. Xyreum uses a Time-based Zero-Knowledge Proof of Knowledge (T-ZKPK) with authenticated encryption to perform Mutual Multi-Factor Authentication (MMFA). T-ZKPK properties are also used to support Key Establishment (KE) for securing transactions. Our approach for reaching consensus, which is a blockchain group decision-making process, is based on lightweight cryptographic algorithms. We evaluate our scheme with respect to security, privacy, and performance, and the results show that, compared with existing relevant blockchain solutions, our scheme is secure, privacy-preserving, and achieves a significant decrease in computation complexity and latency performance with high scalability. Furthermore, we explain how to use our scheme to strengthen the security of the REMME protocol, a blockchain-based security protocol deployed in several application domains.

Using the keyboard LEDs to send data optically was proposed in 2002 by Loughry and Umphress [1] (Appendix A). In this paper we extensively explore this threat in the context of a modern cyber-attack with current hardware and optical equipment. In this type of attack, an advanced persistent threat (APT) uses the keyboard LEDs (Caps-Lock, Num-Lock and Scroll-Lock) to encode information and exfiltrate data from airgapped computers optically. Notably, this exfiltration channel is not monitored by existing data leakage prevention (DLP) systems. We examine this attack and its boundaries for today's keyboards with USB controllers and sensitive optical sensors. We also introduce smartphone and smartwatch cameras as components of malicious insider and 'evil maid' attacks. We provide the necessary scientific background on optical communication and the characteristics of modern USB keyboards at the hardware and software level, and present a transmission protocol and modulation schemes. We implement the exfiltration malware, discuss its design and implementation issues, and evaluate it with different types of keyboards. We also test various receivers, including light sensors, remote cameras, 'extreme' cameras, security cameras, and smartphone cameras. Our experiment shows that data can be leaked from air-gapped computers via the keyboard LEDs at a maximum bit rate of 3000 bit/sec per LED given a light sensor as a receiver, and more than 120 bit/sec if smartphones are used. The attack doesn't require any modification of the keyboard at hardware or firmware levels.

IoT malware detection using control flow graph (CFG)-based features and deep learning networks are widely explored. The main goal of this study is to investigate the robustness of such models against adversarial learning. We designed two approaches to craft adversarial IoT software: off-the-shelf methods and Graph Embedding and Augmentation (GEA) method. In the off-the-shelf adversarial learning attack methods, we examine eight different adversarial learning methods to force the model to misclassification. The GEA approach aims to preserve the functionality and practicality of the generated adversarial sample through a careful embedding of a benign sample to a malicious one. Intensive experiments are conducted to evaluate the performance of the proposed method, showing that off-the-shelf adversarial attack methods are able to achieve a misclassification rate of 100%. In addition, we observed that the GEA approach is able to misclassify all IoT malware samples as benign. The findings of this work highlight the essential need for more robust detection tools against adversarial learning, including features that are not easy to manipulate, unlike CFG-based features. The implications of the study are quite broad, since the approach challenged in this work is widely used for other applications using graphs.

In this paper we consider the threat surface and security of air gapped wallet schemes for permissioned blockchains as preparation for a Markov based mathematical model, and quantify the risk associated with private key leakage. We identify existing threats to the wallet scheme and existing work done to both attack and secure the scheme. We provide an overview the proposed model and outline justification for our methods. We follow with next steps in our remaining work and the overarching goals and motivation for our methods.

With the rapid development of the mobile Internet, Android has been the most popular mobile operating system. Due to the open nature of Android, c countless malicious applications are hidden in a large number of benign applications, which pose great threats to users. Most previous malware detection approaches mainly rely on features such as permissions, API calls, and opcode sequences. However, these approaches fail to capture structural semantics of applications. In this paper, we propose AMDroid that leverages function call graphs (FCGs) representing the behaviors of applications and applies graph kernels to automatically learn the structural semantics of applications from FCGs. We evaluate AMDroid on the Genome Project, and the experimental results show that AMDroid is effective to detect Android malware with 97.49% detection accuracy.

Android malware family classification is an advanced task in Android malware analysis, detection and forensics. Existing methods and models have achieved a certain success for Android malware detection, but the accuracy and the efficiency are still not up to the expectation, especially in the context of multiple class classification with imbalanced training data. To address those challenges, we propose an Android malware family classification model by analyzing the code's specific semantic information based on sensitive opcode sequence. In this work, we construct a sensitive semantic feature-sensitive opcode sequence using opcodes, sensitive APIs, STRs and actions, and propose to analyze the code's specific semantic information, generate a semantic related vector for Android malware family classification based on this feature. Besides, aiming at the families with minority, we adopt an oversampling technique based on the sensitive opcode sequence. Finally, we evaluate our method on Drebin dataset, and select the top 40 malware families for experiments. The experimental results show that the Total Accuracy and Average AUC (Area Under Curve, AUC) reach 99.50% and 98.86% with 45. 17s per Android malware, and even if the number of malware families increases, these results remain good.

Bitcoin is a decentralized, pseudonymous cryptocurrency that is one of the most used digital assets to date. Its unregulated nature and inherent anonymity of users have led to a dramatic increase in its use for illicit activities. This calls for the development of novel methods capable of characterizing different entities in the Bitcoin network. In this paper, a method to attack Bitcoin anonymity is presented, leveraging a novel cascading machine learning approach that requires only a few features directly extracted from Bitcoin blockchain data. Cascading, used to enrich entities information with data from previous classifications, led to considerably improved multi-class classification performance with excellent values of Precision close to 1.0 for each considered class. Final models were implemented and compared using different machine learning models and showed significantly higher accuracy compared to their baseline implementation. Our approach can contribute to the development of effective tools for Bitcoin entity characterization, which may assist in uncovering illegal activities.

Classifying malware programs is a research area attracting great interest for Anti-Malware industry. In this research, we propose a system that visualizes malware programs as images and distinguishes those using Convolutional Neural Networks (CNNs). We study the performance of several well-established CNN based algorithms such as AlexNet, ResNet and VGG16 using transfer learning approaches. We also propose a computationally efficient CNN-based architecture for classification of malware programs. In addition, we study the performance of these CNNs as feature extractors by using Support Vector Machine (SVM) and K-nearest Neighbors (kNN) for classification purposes. We also propose fusion methods to boost the performance further. We make use of the publicly available database provided by Microsoft Malware Classification Challenge (BIG 2015) for this study. Our overall performance is 99.4% for a set of 2174 test samples comprising 9 different classes thereby setting a new benchmark.

To be prepared against cyberattacks, most organizations resort to security information and event management systems to monitor their infrastructures. These systems depend on the timeliness and relevance of the latest updates, patches and threats provided by cyberthreat intelligence feeds. Open source intelligence platforms, namely social media networks such as Twitter, are capable of aggregating a vast amount of cybersecurity-related sources. To process such information streams, we require scalable and efficient tools capable of identifying and summarizing relevant information for specified assets. This paper presents the processing pipeline of a novel tool that uses deep neural networks to process cybersecurity information received from Twitter. A convolutional neural network identifies tweets containing security-related information relevant to assets in an IT infrastructure. Then, a bidirectional long short-term memory network extracts named entities from these tweets to form a security alert or to fill an indicator of compromise. The proposed pipeline achieves an average 94% true positive rate and 91% true negative rate for the classification task and an average F1-score of 92% for the named entity recognition task, across three case study infrastructures.

In the last few years, cryptocurrency mining has become more and more important on the Internet activity and nowadays is even having a noticeable impact on the global economy. This has motivated the emergence of a new malicious activity called cryptojacking, which consists of compromising other machines connected to the Internet and leverage their resources to mine cryptocurrencies. In this context, it is of particular interest for network administrators to detect possible cryptocurrency miners using network resources without permission. Currently, it is possible to detect them using IP address lists from known mining pools, processing information from DNS traffic, or directly performing Deep Packet Inspection (DPI) over all the traffic. However, all these methods are still ineffective to detect miners using unknown mining servers or result too expensive to be deployed in real-world networks with large traffic volume. In this paper, we present a machine learning-based method able to detect cryptocurrency miners using NetFlow/IPFIX network measurements. Our method does not require to inspect the packets' payload; as a result, it achieves cost-efficient miner detection with similar accuracy than DPI-based techniques.

Automatic emotion recognition using computer vision is significant for many real-world applications like photojournalism, virtual reality, sign language recognition, and Human Robot Interaction (HRI) etc., Psychological research findings advocate that humans depend on the collective visual conduits of face and body to comprehend human emotional behaviour. Plethora of studies have been done to analyse human emotions using facial expressions, EEG signals and speech etc., Most of the work done was based on single modality. Our objective is to efficiently integrate emotions recognized from facial expressions and upper body pose of humans using images. Our work on bimodal emotion recognition provides the benefits of the accuracy of both the modalities.

The proliferation of IoT devices in smart homes, hospitals, and enterprise networks is wide-spread and continuing to increase in a superlinear manner. The question is: how can one assess the security of an IoT network in a holistic manner? In this paper, we have explored two dimensions of security assessment- using vulnerability information and attack vectors of IoT devices and their underlying components (compositional security scores) and using SIEM logs captured from the communications and operations of such devices in a network (dynamic activity metrics). These measures are used to evaluate the security of IoT devices and the overall IoT network, demonstrating the effectiveness of attack circuits as practical tools for computing security metrics (exploitability, impact, and risk to confidentiality, integrity, and availability) of the network. We decided to approach threat modeling using attack graphs. To that end, we propose the notion of attack circuits, which are generated from input/output pairs constructed from CVEs using NLP, and an attack graph composed of these circuits. Our system provides insight into possible attack paths an adversary may utilize based on their exploitability, impact, or overall risk. We have performed experiments on IoT networks to demonstrate the efficacy of the proposed techniques.